Dodatne informacije

• Lični podaci

• Datum rođenja: 10.11.1976.
• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Mašinski fakultet u Nišu
• Odsek / Grupa / Smer: Proizvodno mašinstvo
• Godina diplomiranja: 2003.

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  Vitković, N., Trajanović, M., Barać, M., Trifunović, M., Stojković, J., Stan, S.D., & Pacurar, R. (2024). Novel Approach for Education in Biomedical Engineering Based on Atomic Learning. In M. Trajanovic, N. Filipovic, & M. Zdravkovic (Eds.), Disruptive Information Technologies for a Smart Society, ICIST 2023, Lecture Notes in Networks and Systems, Vol. 872 (pp. 279-287). Springer, Cham. Print ISBN: 978-3-031-50754-0, Online ISBN: 978-3-031-50755-7, DOI: 10.1007/978-3-031-50755-7_26 (M14).

  
  

  Trifunovic, M., Stojkovic, M., Trajanovic, M., & Manic, M. (2015). Semantic interpretation of geometric and technological features. In F. Cus, V. Gecevska, & F. Chiampo (Eds.), Methods and techniques for industrial development (pp. 145-165). Maribor, Slovenia: Faculty of Mechanical Engineering. ISBN: 978-961-248-493-4 (M14)

• Knjige i udžbenici:

  Stojković, M., Trifunović, M., Ranđelović, S., Stojković, J., Vitković, N., & Turudija, R. (2023). MODELIRANJE TEHNOLOŠKIH OPERACIJA NUMERIČKI UPRAVLJANIH MAŠINA POMOĆU RAČUNARA. Niš, Srbija: Mašinski fakultet u Nišu. ISBN: 978-86-6055-165-0

  
  

  Trifunović , M. (2021). RAČUNAROM PODRŽANA PROIZVODNJA – Praktikum. Niš , Srbija: Mašinski fakultet u Nišu. ISBN: 978-86-6055-146-9

• Radovi u časopisima sa IMPACT faktorom:

  Milovanović, J., Stojković, M., Trifunović, M., & Vitković, N. (2023). Review of Bone Scaffold Design Concepts and Design Methods. FACTA UNIVERSITATIS, Series: Mechanical Engineering, 21(1), 151-173. DOI: 10.22190/FUME200328038M (M21a)

  
  

  Trifunović, M., Madić, M., Marinković, D., & Marinković, V. (2023). Cutting Parameters Optimization for Minimal Total Operation Time in Turning POM-C Cylindrical Stocks into Parts with Continuous Profile Using a PCD Cutting Tool. Metals, 13(2), Article ID: 359, 19 pages. DOI: 10.3390/met13020359 (M22)

  
  

  Stojkovic, M., Turudija, R., Trifunovic, M., Pavlovic, M., Jovanovic, I., Uzelac, N., & Milenkovic, V. (2022). A study of the use of mixed reality for capturing human observation and inferences in production environments. FACTA UNIVERSITATIS, Series: Mechanical Engineering, Online First, 21 pages. DOI: 10.22190/FUME220714047S (M21a)

  
  

  Stojković, M., Madić, M., Trifunović, M., & Turudija, R. (2022). Determining the Optimal Cutting Parameters for Required Productivity for the Case of Rough External Turning of AISI 1045 Steel with Minimal Energy Consumption. Metals, 12(11), Article ID: 1793, 23 pages. DOI: 10.3390/met12111793 (M22)

  
  

  Mišić, D., Stojković, M., Trifunović, M., & Vitković, N. (2022). Detection and handling exceptions in business process management systems using Active Semantic Model. FACTA UNIVERSITATIS, Series: Mechanical Engineering, Online First, 22 pages. DOI: 10.22190/FUME211115026M (M21a)

  
  

  Stojković, M., Trifunović, M., Milovanović, J., & Arsić, S. (2022). User Defined Geometric Feature for the Creation of the Femoral Neck Enveloping Surface. FACTA UNIVERSITATIS, Series: Mechanical Engineering, 20(1), 127-143. DOI: 10.22190/FUME200220034S (M21a)

  
  

  Korunović, N., Banić, M., Trifunović, M., & Pavlović A. (2021). Bergström-Boyce vs. Hyperelastic Rubber Models in Structural Analysis of Tires. FACTA UNIVERSITATIS, Series: Mechanical Engineering, 19(4), 767-779. DOI: 10.22190/FUME191124002K (M21)

  
  

  Gostimirovic, M., Sekulic, M., Trifunovic, M., Madic, M., & Rodic, D. (2021). Stability analysis of the inverse heat transfer problem in the optimization of the machining process. Applied Thermal Engineering, 195, Article ID: 117174, 14 pages. DOI: 10.1016/j.applthermaleng.2021.117174 (M21a)

  
  

  Trifunović, M., & Madić, M. (2021). Experimental Research in Turning of Unreinforced Plastics: A Review. FACTA UNIVERSITATIS, Series: Mechanical Engineering. Rad je prihvaćen za publikovanje. Preliminarni DOI broj: 10.22190/FUME210207075T (M22)

  
  

  Trifunović, M., Madić, M., Janković, P., Rodić, D., & Gostimirović, M. (2021). Investigation of cutting and specific cutting energy in turning of POM-C using a PCD tool: Analysis and some optimization aspects. Journal of Cleaner Production, 303, Article ID: 127043, 19 pages. DOI: 10.1016/j.jclepro.2021.127043 (M21a)

  
  

  Trifunović, M., Madić, M., & Radovanović, M. (2020). Pareto optimization of multi-pass turning of grey cast iron with practical constraints using a deterministic approach. The International Journal of Advanced Manufacturing Technology, 110(7-8), 1893-1909. DOI: 10.1007/s00170-020-05994-4 (M22)

  
  

  Vitković, N., Mladenović, S., Trifunović, M., Zdravković, M., Manić, M., Trajanović, M., Mišić, D., & Mitić, J. (2018). Software Framework for the Creation and Application of Personalized Bone and Plate Implant Geometrical Models. Journal of Healthcare Engineering, 2018, Article ID: 6025935, 11 pages. DOI: 10.1155/2018/6025935 (M23)

  
  

  Trifunovic, M., Stojkovic, M., Trajanovic, M., Manic, M., Misic, D., & Vitkovic, N. (2016). Analysis of semantic features in free-form objects reconstruction. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30(1), 44-63. DOI: 10.1017/S0890060415000153 (M23)

  
  

  Stojkovic, M., Trifunovic, M., Misic, D., & Manic, M. (2015). Towards Analogy-Based Reasoning in Semantic Network. Computer Science and Information Systems, 12(3), 979-1008. DOI: 10.2298/CSIS141103036S (M23)

  
  

  Trifunovic, M., Stojkovic, M., Misic, D., Trajanovic, M., & Manic, M. (2015). Recognizing Topological Analogy in Semantic Network. International Journal on Artificial Intelligence Tools, 24(3), 1550006-1 - 1550006-25. DOI: 10.1142/S0218213015500062 (M23)

  
  

  Korunović, N., Trajanović, M., Stojković, M., Vitković, N., Trifunović, M., & Milovanović, J. (2012). Detailed vs. Simplified Tread Tire Model for Steady-State Rolling Analysis. Strojarstvo: časopis za teoriju i praksu u strojarstvu, 54(2), 153-160. (M23)

  
  

  Stefanović, G., Vučković, G., Stojiljković, M., & Trifunović, M. (2010). CO2 reduction options in cement industry - The Novi Popovac case. Thermal Science, 14(3), 671-679. DOI: 10.2298/TSCI091211014S (M23)

  
  

  Mišic, D., Stojkovic, M., Domazet, D., Trajanovic, M., Manic, M., & Trifunovic, M. (2010). Exception detection in business process management systems. Journal of Scientific & Industrial Research, 69(3), 188-193. (M23)

• Radovi u ostalim časopisima:

  Trifunović, M., Madić, M., & Janković, P. (2023). Analysis of chip compression ratio in turning of polyoxymethylene copolymer. Journal of Production Engineering, 26(2), 13-17. DOI: 10.24867/JPE-2023-02-013 (M52)

  
  

  Trifunović, M., Madić, M., Janković, P., & Radovanović, M. (2023). Parameter screening in longitudinal turning of C45E steel for surface roughness analysis. Journal of the Technical University of Gabrovo, 67, 57-61. DOI: 10.62853/FVOS5135 (M53)

  
  

  Stojković, M., Trifunović, M., Madić, M., Turudija, R., & Manić, M. (2022). Partial effect of cutting parameters on engaged power and energy consumption: The case of external turning of an AISI1045 steel workpiece. Innovative Mechanical Engineering, 1(2), 34-47. (M54)

  
  

  Madić, M., Trifunović, M., & Janković, T. (2022). Development and analysis of a surface roughness model in dry straight turning of C45E steel. Innovative Mechanical Engineering, 1(2), 11-21. (M54)

  
  

  Trifunović, M., & Madić, M. (2022). Application of fractional factorial design for analysis of cutting energy in turning. Journal of the Technical University of Gabrovo, 65, 46-50. DOI: 10.62853/TOOK2098 (M53)

  
  

  Korunović, N., Stojković, M., Milovanović, J., Vitković, N., Trifunović, M., Manić, M., & Trajanović, M. (2016). Bioengineering and tire design related research at LIPS laboratory – a summary of results. Journal of the Serbian Society for Computational Mechanics, 10(1), 71-101. DOI: 10.5937/jsscm1601071K (M52)

  
  

  Trifunović, M., Stojković, M., Trajanović, M., Mišić, D., & Manić, M. (2013). Interpreting the meaning of geometric features based on the similarities between associations of semantic network. FACTA UNIVERSITATIS, Series: Mechanical Engineering, 11(2), 181-192. (M51)

• Radovi na naučnim skupovima međunarodnog značaja:

  Madić, M., Ranđelović, S., & Trifunović, M. (2023). Stochastic simulation model for the analysis of assist gas costs in CO2 laser oxygen cutting. Proceedings of the 9th international conference "Transport and Logistics" (til 2023) (pp. 159-164), 1st December 2023, Niš, Serbia. ISBN: 978-86-6055-176-6 (M33)

  
  

  Madić, M., Trifunović, M., & Stanković, A. (2023). Solving single tool hole drilling path optimization problems using evolutionary algorithm. Proceedings of the 9th international conference "Transport and Logistics" (til 2023) (pp. 153-157), 1st December 2023, Niš, Serbia. ISBN: 978-86-6055-176-6 (M33)

  
  

  Trifunović, M., Madić, M., & Janković, P. (2023). Modelling and analysis of chip compression ratio in turning of POM-C. Proceedings of the 39th International Conference on Production Engineering of Serbia (ICPES 2023) (pp. 158-164), 26th-27th October 2023, Novi Sad, Serbia. ISBN: 978-86-6022-610-7 (M33)

  
  

  Trifunović, M., & Madić, M. (2023). Optimization of cutting parameters for maximizing profit rate in milling using a deterministic approach. Proceedings of the XIII International Conference "Industrial Engineering and Environmental Protection" (IIZS 2023) (pp. 64-71), 5th-6th October 2023, Zrenjanin, Serbia. ISBN: 978-86-7672-368-3 (M33)

  
  

  Trifunović, M., & Madić, M. (2023). Analysis of specific cutting energy in longitudinal turning of unalloyed steels. Proceedings of the XI Triennial International Conference "Heavy Machinery - HM 2023" (pp. C.7-C.12), 21st-24th June 2023, Vrnjačka Banja, Serbia. ISBN: 978-86-82434-01-6 (M33)

  
  

  Trifunović, M., Madić, M., & Vitković, N. (2023). Optimization of Cutting Parameters for Minimizing Unit Production Time in Multi-Pass Rough Turning of S355JR Structural Steel. Proceedings of the 16th International Conference on Accomplishments in Mechanical and Industrial Engineering (DEMI 2023) (pp. 99-103), 1st-2nd June 2023, Banja Luka, Republic of Srpska. ISBN: 978-99976-11-04-8 (M33)

  
  

  Madić, M., Trifunović, M., & Petković, D. (2023). Assessment of cutting regimes in turning of POM-C using a PCD tool based on AHP-WASPAS approach. Proceedings of the 19th International May Conference on Strategic Management (IMCSM23) (pp. 144-153), 25th May 2023, Bor, Serbia. ISBN: 978-86-6305-136-2 (M33)

  
  

  Madić, M., Coteata, M., Janković, P., & Trifunović, M. (2021). Analysis of specific cutting energy in laser fusion cutting of an aluminium alloy. Proceedings of the 25th Innovative Manufacturing Engineering & Energy International Conference (IManEE 2021) (Article ID: 012015), 21st-23rd October 2021, Iasi, Romania. DOI: 10.1088/1757-899X/1235/1/012015 (M33)

  
  

  Stojković, M., Manić, M., Turudija, R., Trifunović, M., Jovanović, I., Pavlović, M., & Milenković, V. (2021). Augmented reality in industry 4.0: Instruction for maintenance operations for high voltage equipment. Proceedings of the 38th International Conference on Production Engineering of Serbia (ICPE-S 2021) (pp. 305-311), 14th-15th October 2021, Čačak, Serbia. ISBN: 978-86-7776-252-0 (M33)

  
  

  Trifunović, M., Madić, M., & Vitković, N. (2021). Cutting parameters optimization for minimizing energy consumption in multi-pass turning of grey cast iron. Proceedings of the 14th International Scientific Conference MMA 2021 – Flexible Technologies (pp. 27-30), 23rd-25th September 2021, Novi Sad, Serbia. ISBN: 978-86-6022-364-9 (M33)

  
  

  Trifunović, M., Janković, P., & Vitković, N. (2020). Optimization of Cutting Parameters for Minimizing Part Production Costs in Multi-Pass Rough Turning of EN-GJL-250 Grey Cast Iron. Proceedings of the 5th International Conference "Mechanical Engineering in XXI Century" (MASING 2020) (pp. 255-258), 9th-10th December 2020, Niš, Serbia. ISBN: 978-86-6055-139-1 (M33)

  
  

  Madic, M., Janković, P., Trifunović, M., & Kovačević, M. (2020). Application of software solution for solving engineering design optimization problems. IOP Conference Series: Materials Science and Engineering, Volume 1018, Proceedings of the 11th International Conference on Advanced Manufacturing Technologies (ICAMaT 2020) (Article ID: 012025, 8 pages), 29th-30th October 2020, Bucharest, Romania. DOI: 10.1088/1757-899X/1018/1/012025 (M33)

  
  

  Vitković, N., Simonović, M., Miltenović, A., & Trifunovic, M. (2018). Software module for the visualization and planning of marshalling yard operations. Proceedings of the XVIII Scientific-Expert Conference on Railways (RAILCON '18) (pp. 213-216), 11th-12th October 2018, Niš, Serbia. ISBN: 978-86-6055-105-6 (M33)

  
  

  Vitković, N., Stojković, M., Trajanović, M., Milovanović, M., Trifunović, M., Manić, M., Mitić, J., Arsić, S., & Husain, K. (2018). Personalized 3D Model of Bone Scaffold Created by Application of Method of Anatomical Features. Proceedings of the 4th International Conference "Mechanical Engineering in XXI Century" (MASING 2018) (pp. 305-308), 19th-20th April 2018, Niš, Serbia. ISBN: 978-86-6055-103-2 (M33)

  
  

  Zdravković, M., Vitković, N., Trajanović, M., Trifunović, M., & Korunović, N. (2018). Model-based, client-side integration of heterogeneous data from REST services. Proceedings of the 8th International Conference on Information Society and Technology (ICIST 2018) (pp. 278-281), 11th-14th March 2018, Kopaonik, Serbia. ISBN: 978-86-85525-22-3 (M33)

  
  

  Mišić, D., Mišić, M., Trifunović, M., Arh, T., & Matić, P. (2014). AHP Based Comparison of open-source BPM Systems. Proceedings of the 6th International ICT Conference (6th International ICT Forum) (pp. 119-123), 14th-16th October 2014, Niš, Serbia. ISBN: 978-86-80593-52-4 (M33)

  
  

  Madić, M., Vitković, N., & Trifunović, M. (2014). Application of the WASPAS Method for Software Selection. Proceedings of the 6th International ICT Conference (6th International ICT Forum) (pp. 115-118), 14th-16th October 2014, Niš, Serbia. ISBN: 978-86-80593-52-4 (M33)

  
  

  Trifunovic, M., Stojkovic, M., Trajanovic, M., Misic, D., & Manic, M. (2014). Approach in realization of analogy-based reasoning in semantic network. Proceedings of the 4th International Conference on Information Society and Technology (ICIST 2014) (pp. 192-197), 9th-13th March 2014, Kopaonik, Serbia. ISBN: 978-86-85525-14-8 (M33)

  
  

  Stojkovic, M., Korunovic, N., Trajanovic, M., Milovanovic, J., Trifunovic, M., & Vitkovic, N. (2013). Design study of anatomically shaped lattice scaffolds for the bone tissue recovery. Proceedings of the 3rd South-East European Conference on Computational Mechanics (SEECCM III) (pp. 381-393), 12th-14th June 2013, Kos island, Greece. ISBN : 978-960-99994-4-1 (M33)

  
  

  Stevanović, D., Korunović, N., Trajanović, M., Trifunović, M., Milovanović, J., & Stojković, M. (2012). Finite element model of human tibia and preliminary analysis. Proceedings of the 11th International Scientific Conference MMA 2012 - Advanced Production Technologies (pp. 289-292), 20th-21st September 2012, Novi Sad, Serbia. ISBN: 978-86-7892-419-4 (M33)

  
  

  Veselinovic, M., Stevanovic, D., Trajanovic, M., Manic, M., Arsic, S., Trifunovic, M., & Misic, D. (2011). Method for creating 3D surface model of the human tibia. Proceedings of the 34th International Conference on Production Engineering (ICPE 2011) (pp. 355-358), 28th-30th September 2011, Niš, Serbia. ISBN: 978-86-6055-019-6 (M33)

  
  

  Trifunović, M., Milovanović, J., Trajanović, M., Korunović, N., & Stojković, M. (2011). Approaches to automated creation of tissue engineering scaffolds. Proceedings of the 34th International Conference on Production Engineering (ICPE 2011) (pp. 335-338), 28th-30th September 2011, Niš, Serbia. ISBN: 978-86-6055-019-6 (M33)

  
  

  Korunović, N., Trajanović, M., Stojković, M., Vitković, N., Trifunović, M., & Milovanović, J. (2011). Tire tread modeling for FEA. Proceedings of the 34th International Conference on Production Engineering (ICPE 2011) (pp. 209-212), 28th-30th September 2011, Niš, Serbia. ISBN: 978-86-6055-019-6 (M33)

  
  

  Stojkovic, M., Manic, M., Trifunovic, M., & Vitkovic, N. (2011). Semantic interpretation of the product model features in product quality assessment. Proceedings of the 6th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" (IWC TQM 2011) (pp. 481-484), 7th-11th June 2011, Belgrade, Serbia. ISBN: 978-86-7083-727-0 (M33)

  
  

  Stojković, M., Manić, M., Trifunović, M., & Mišić, D. (2011). Semantic categorization of data by determining the similarities of associations of the semantic network. Proceedings of the 1st International Conference on Information Society Technology and Management (ICIST 2011) (pp. 140-145), 6th-9th March 2011, Kopaonik, Serbia. ISBN: 978-86-85525-07-0 (M33)

  
  

  Manić, M., Stojković, M., & Trifunović, M. (2010). Semantic features in computer aided manufacturing systems. Proceedings of the International Conference "Mechanical Engineering in XXI Century" (MASING 2010) (pp. 179-182), 25th-26th November 2010, Niš, Serbia. ISBN: 978-86-6055-008-0 (M33)

  
  

  Stefanovic, G., Vuckovic, G., Stojiljkovic, M., & Trifunovic, M. (2009). Possibility of CO2 Emissions Decreasing in Cement Industry - the Novi Popovac case. Proceedings of the 5th Dubrovnik Conference on Sustainable Development of Energy, Water And Environment Systems (SDEWES 2009), 29th September - 3rd October 2009, Dubrovnik, Croatia. ISBN: 978-953-6313-97-6 (M33)

  
  

  Stojković, M., Manić, M., Trifunović, M., & Mišić, D. (2009). Semantic interpretation of geometrical features. Proceedings of the 5th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" (IWC TQM 2009) (pp. 91-96), 31st May - 4th June 2009, Belgrade, Serbia. ISBN: 978-86-7083-660-0 (M33)

• Radovi na domaćim naučnim skupovima:

  Korunović, N., Trifunović, M., Vitković, N., Milovanović, J., & Trajanović, M. (2014). Non-linear cord material models in finite element analysis of tires. Zbornik radova VIII Naučne konferencije "PneUMAtici 2014" (PUMA 2014) (pp. 27-42), 12.-13. decembar 2014. godine, Beograd, Srbija. ISBN: 978-86-84231-34-7 (M63)

  
  

  Stojković, M., Manić, M., Trifunović, M., & Mišić, D. (2009). Prepoznavanje tehničkih elemenata CAD modela analizom njihovih značenjskih odlika. YU INFO 2009, 8.-11. mart 2009. godine, Kopaonik, Srbija. Zbornik radova na CD-u. (M63)

  
  

  Trajanović, M., Vitković, N., Trifunović, M., & Arsić, S. (2009). Novi pristup u generisanju interpolacionih površina fizičkih objekata. YU INFO 2009, 8.-11. mart 2009. godine, Kopaonik, Srbija. Zbornik radova na CD-u. (M63)

  
  

  Zdravković, M., Trajanović, M., Manić, M., & Trifunović, M. (2007). Integrisanje poslovnih servisa u malim i srednjim preduzećima proizvodne delatnosti. YU INFO 2007, 11.-14. mart 2007. godine, Kopaonik, Srbija. Zbornik radova na CD-u. (M63)

• Tehnička rešenja:

  AsmWeb (M85)
  Rukovodilac projekta: dr Miroslav Trajanović, red. prof.
  Odgovorno lice: dr Miroslav Trajanović, red. prof.
  Autori: dr Miloš Stojković, dr Dragan Mišić, Milan Trifunović, Nikola Vitković, dr Miodrag Manić
  Razvijeno: u okviru projekta "Virtuelni koštano zglobni sistem čoveka i njegova primena u pretkliničkoj i kliničkoj praksi" (broj projekta: III41017)
  Godina: 2012
  Primena: 2012.-2013.

  
  

  Definisanje 3D modela nedostajućih delova kostiju na osnovu 3D modela kostiju i osteofiksacionog materijala upotrebom MAF metode (M85)
  Rukovodilac projekta: dr Miroslav Trajanović, red. prof.
  Odgovorno lice: dr Miroslav Trajanović, red. prof.
  Autori: dr Miroslav Trajanović, Nikola Vitković, Marko Veselinović, dr Jelena Milovanović, dr Nikola Korunović, dr Dragan Mišić, Milan Trifunović
  Razvijeno: u okviru projekta "Virtuelni koštano zglobni sistem čoveka i njegova primena u pretkliničkoj i kliničkoj praksi" (broj projekta: III41017)
  Godina: 2011.-2014.
  Primena: novembar 2012.

  
  

  TEPOST - Sistem za projektovanje TEhnoloških POSTupaka izrade proizvoda i usluga (M85)
  Rukovodilac projekta: dr Miodrag Manić, red. prof.
  Odgovorno lice: dr Miodrag Manić, red. prof.
  Autori: dr Miodrag Manić, dr Dragan Mišić, dr Miloš Stojković, Milan Trifunović, Nikola Vitković
  Razvijeno: u okviru projekta "Planiranje, terminiranje i adaptabilno upravljanje proizvodnim procesima" (broj projekta: TR-6215A)
  Godina: 2005.-2008.
  Primena: 2008.-2010.