Naučne publikacije akademskog osoblja

Naučne publikacije i umetničke reference akademskog osoblja

Univerzitet u Nišu

NAPOMENA

Za tačnost unetih podataka o publikacijama, naučnim i umetničkim referencama odgovorni su autori.
Datum kreiranja: 22.01.2014.

Saša Ranđelović

Dodatne informacije

  • Lični podaci

  • Datum rođenja: 26.11.1966.
  • Mesto rođenja: Niš

  • Obrazovanje

  • Fakultet: Mašinski fakultet u Nišu
  • Odsek / Grupa / Smer: Proizvodno informacione tehnologije
  • Godina diplomiranja: 1992.

  • Spisak publikacija

  • Monografije i poglavlja u monografijama:

    Randjelovic S., Manufacturability of Biomaterials (chapter), Springer, Zivic F. Et al. (eds.) Biomaterials in Clinical Practice, Advances in Clinical Research and Medical Devices, Springer International Publishing AG 2018, pp. 633-658, ISBN: 978-3-319-68024-8,
  • Knjige i udžbenici:

     Ranđelović S, Marinković V. Proizvodne tehnologije, Obrada palstičnim deformisanjem, Mašinski fakultet u Nišu, 2017. (Usvojene recenzije)


    Stoiljković V, Milosavljević P, Ranđelović S, Industrijski menadžment, praktikum, Mašinski fakultet u Nišu, 2010, Srbija. ISBN 978-86-6055-003-5
  • Radovi u časopisima sa IMPACT faktorom:

    1. Blagojevic Vladislav A, Seslija Dragan D, Dudic Slobodan P, Randjelovic Sasa SR, Energy Efficiency of Pneumatic Cylinder Control with Different Levels of Compressed Air Pressure and Clamping Cartridge, ENERGIES 2020 13 (14), 3711. M22


    Ranđelović S., Madić M., Milutinović M., Tanikić D., METHODOLOGICAL APPROACH FOR THE TEXTURE DEFORMATION ANALYSIS IN THE COLD EXTRUSION PROCESS, The International Journal Advanced manufacturing engineering, DOI: 10.1007/s00170-017-0373-3


    D. Tanikić, V. Marinković, M. Manić, G. Devedžić, S. Ranđelović, Application of response surface methodology and fuzzy logic based system for determining the metal cutting temperature, Bulletin of the Polish Academy of Sciences - Technical Sciences, 2016, vol.64, br.2, str. 435-445. DOI:10.1515/bpasts-2016-0049


    Pepelnjak T, Milutinović M, Plančak M, Vilotić D, Ranđelović S, Movrin D, Strojniški vestnik - Journal of Mechanical Engineering, "The Influence of Extrusion Ratio on Contact Stresses and Die Elastic Deformations in Case of Cold Backward Extrusion", 62 (2016) vol. 1, pp. 41-50. DOI:10.5545/sv-jme.2015.3051


    S. Randjelović, M. Manić, M. Trajanović, M. Milutinović, D. Movrin, The impact of die angle on tool loading in the process of cold extruding steel, Materials and technology, vol. 46, No.2, 2012, ISSN: 1580-2949, UDK621.77, pp. 149-154, IMT Ljubljana, Slovenija


    Stoiljković V, Milosavljević P, Ranđelović S, Six Sigma Concept within Banking System, African Journal of Business Management,  Vol. 6, 2010, ISSN 1993-8233, Nairobi, Victoria Island, Nigeria


    Randjelović S, Milosavljevic P, Sommitsch C, Hot extrusion technology generation on the basis of FEM and FMEA analysis, Strojarstvo, pp. 43-50, vol. 52, No1, 2010, ISSN 0562-1887
  • Radovi u ostalim časopisima:

    Ranđelović S., Milutinović M., Blagojević V., Mladenović S., Tanikić D., Analysis of multi - cavity molding of parts with different geometries, Journal of Advanced Technologies and Materials,  Vol. 45, No. 1, 2020, pp. 33 - 43, DOI: 10.24867/ATM-2020-1-004


    Živanović, S., Tabaković, S., Ranđelović S., Rapid Prototyping of Art Sculptural Shapes According to the Sample, Advanced Technologies and Materials, Vol. 44, No. 1, 2019, pp. 27-32, doi: 10.24867/ATM-2019-1-027.


    Blagojević V., Ranđelović S., Nikolić V., Dudić S., Automatic generation of the PLC programs for the sequential control of pneumatic actuators, Facta Universitatis, Series: Mechanical Engineering, Vol 17, No. 3. DOI 10.22190/FUME190123033B (2019) http://casopisi.junis.ni.ac.rs/index.php/FUMechEng


    Ranđelović S., Milutinović M., Blagojević V., The deep drawing technology  with wall ironing in mass packaging industry, FACTA UNIVERSITATIS, Series: Mechanical Engineeringod Vol. 15, NO.1 pp. 107-117, 2017.

    Milutinović M., Movrin D., Pepelnjak T., Skakun P., Ranđelović S.: Experimental and numerical determination of press frame elasticity, International journal for science, technics and innovations for the industry, Machines.Technologies.Materials. Issue 4/2016, 2016, pp. 23-36, ISSN: 1313-0226

    Ranđelović S, Milutinović M, Nikolić S, Kačmarčik I, Risk assessment in injection molding process, Journal for technology of plasticity, vol 40. No.2, 2015, ISSN 0354-3870, pp.23-33.

    V. Blagojević, P. Janković, S. Ranđelović, Application of digital sliding modes to synchronization of the work of several hydraulic cylinders, Facta Universitatis, Series: Automatic Control and Robotics, pp. 67-76, Niš, 2015.

    S. Nikolić, S. Ranđelović, M. Milutinović, Effect of mold temperature on melt front temperature of thermoplastic resin at injection molding, Journal for technology of plasticity, vol 39. No.2, 2014, ISSN 0354-3870, pp.55-64.

    D. Tanikić, M. Manić, S. Ranđelović, D. Brodić: Shape memory alloys and their medical application, Vojnotehnički glasnik/The Military Technical Courier (ISSN 0042-8469), Vol. 62, No. 4, 2014., pp. 59-71

    Ranđelović S, Mišić D, Trajanović M, Vitković N, Veselinović M, Customization of orthopedic internal fixator, Acta technica corviniensis – Bulletin of Engineering, Tome VI (2013) – Fascicule 2 (April-June) ISSN 2067-3809 

    Tanikić I. Dejan, Manić T. Miodrag, Đenadić, M. Dalibor, Ranđelović S. Saša, Milovanović R. Jelena, Đekić S. Petar Metali i legure u funkciji biomaterijala, Vojnotehnički glasnik, 2-2012. DOI:10.2298/vojtehg1202202T, ISSN 0042-8469, Beograd, Srbija

    S. Randjelovic, F Krumphals, M. Jovanovic, D. Tanikic, D. Djenadic, Analysis of cold forging process by adaptive FEM mothod, Journal for technology of plasticity, vol 36. No.2, 2011, ISSN 0354-3870, pp.137-146.

    Krumphals F., Sherstnev P., Mitsche S., Randjelovic S, Sommitsch C., "Physically Based Microstructure Modelling of AA6082 during Hot Extrusion", Key Engineering Materials (Vol. 424) pp. 27-34, 2009. doi:10.4028/www.scientific.net/KEM.424

    Krumphals F, Sherstnev P, Ranđelović S, Analysis of hot extrusion of aluminium alloy by nonlinear FEM code, Journal for technology of plasticity 2009, ISSN 0354-3870, pp 121-129

    S. Randjelović, S. Mladenović, Risk analysis of forward extrusion process of hollow elements, Journal for Technology of Plasticity, UDK 621.7, ISSN 0354-3870, vol. 32, 1-2, pp. 57-66, Novi Sad, 2007.

    S. Randjelović, S. Živanović, CAD - CAM data transferring as a part of product life cycle, UDC 681.31, FACTA UNIVERSITATIS, Series: Mechanical Engineeringod Vol. 1, pp.87-93, 2007.

    S. Randjelović, S. Mladenović, P. Milosavljević, "Modelling of forward extrusion process for hollow elements on base of nonlinear adaptive finite element method", Journal for Technology of Plasticity, vol. 31, 1-2, Novi Sad, 2006. Serbia

    S. Randjelović, V. Stoiljković, "Modular approach at design of extrusion technology", Journal for Technology of Plasticity, vol. 25, 1-2, pp.45-58, Novi Sad, 2000. Yugoslavia

    V. Stoiljković, S. Ranđelović, "Establishing correlation between the grain microdeformation and the object macrodeformation", Journal for Technology of Plasticity, vol. 23, 1-2, pp.75-86, Novi Sad, 1998.
  • Radovi na naučnim skupovima međunarodnog značaja:




        1. Ranđelović S., Milutinović M., Blagojević V., Đokić D., Kostić N., The future of Manufacturing Processes with Support I4.0, Proceedings of The 5th International conference Mechanical Engineering in XXI century, pp. 335-338, .....ISBN 978-86-6055-10-32, december 9th - 10th, 2020. Niš, Serbia



        2. Ranđelović S., Milutinović M., Petković D., Đokić D., Kostić N., Hot forging process analysis of axisymetric elements with high precision, Conference on Mechanical Engineering Technologies and Applications, COMETa 2020, 5th International sientific conference, University of East Sarajevo, 26th-28th November, 2020. Jahorina Republic of Srpska, BiH, pp. .....



      2. Ranđelović S., Milutinović M., Blagojević V., Mladenović S., Hot forming process of upper pivot of freight cars, RAILCON'20, October 15-16. 2020. Faculty of Mechanical Engineering, University of Nis, pp 173-176.




      3. Milutinović M., Pepelnjak T., Movrin D., Skakun P., Vilotić M., Ranđelović S., Effects of material properties and blank holder pressure on forming load in deep drawing of box like components, Proceedings of the International conference DEMI 2019, ISBN 978-99938-39-85-9, pp. 113-116, 24.-25. Maj 2019. Banja Luka                                                                                                                               




      Ranđelović S., Milutinović M., Tanikić D., Blagojević V., The technology of tube hydroforming and parameters process, Proceedings of the International conference DEMI 2019, ISBN 978-99938-39-85-9,  pp. 125-128, 24.-25. Maj 2019. Banja Luka 



      1. V. Blagojević, S. Ranđelović, P. Janković., Types of energy efficient control of pneumatic actuator system, Proceedings of the International conference DEMI 2019, ISBN 978-99938-39-85-9, pp. 447-450, Banja Luka                                                                                                          


      1. Mladenović S., Ranđelović S., Milošević M., M., Analysis of Universal Radiography System Support by FMEA and FEM,  XIV International SAUM Conference on Systems, Automatic Control and Measurements,  Niš, Serbia, November 14th-16th, 2018.


      M33



      1. Blagojević V. A., Ranđelović S. S., Milanović S. M., Automatic Generation of PLC Programs For Pneumatic Actuators Sequential Control With Two End Positions, XIV International SAUM Conference on Systems, Automatic Control and Measurements, Niš, Serbia, November 14th-16th, 2018.


                              



      1. Ranđelović, S., Madić, M., Milutinović M., Tanikić D., The forward extrusion process analysis based on plastic deformation of metal grain structure, 37th International Conference on Production Engineering of Serbia, ICPE-S 2018, pp. 288-291, ISBN 978-86-6335-057-1, Kragujevac, Serbia 25-26. October 2018.


       



      1. Ranđelović, S., Milutinović, M., Mladenović, S., Blagojević, V.,:
        FEM analysis of die plate at piercing and blanking tool, 13th International Scientific Conference MMA2018. Flexible technologies, September 28-29, 2018. pp. 275-278, ISBN 978-86-6022-094-5, Novi Sad, Serbia


       



      1. Milutinović M., Movrin D., Skakun P., Stefanović Lj., Vilotić D.,  Ranđelović S.,: Some remarks on process of combined forward – backward extrusion of steel, 13th International Scientific Conference MMA2018. Flexible technologies, September 28-29, 2018. pp. 261-264, ISBN 978-86-6022-094-5, Novi Sad, Serbia


      M33



      1. Blagojević V. A., Ranđelović S. S., Milanović S. M., Experimental Model for Pneumatic Actuators Synchronization, Proceedings of the 4th International conference Mechanical Engineering in XXI century, pp. 335-338, ISBN 978-86-6055-10-32, april 19-20, 2018. Niš, Serbia                                                                                                                 

      2. Ranđelović S., Milutinović M., Blagojević V., Tanikić D., Nonlinear FEM Simulation of Extrusion Process, Proceedings of the 4th International conference Mechanical Engineering in XXI century, pp. 343-346, ISBN 978-86-6055-10-32, april 19-20, 2018. Niš, Serbia                                                                                                                 

      Milutinović M., Pepelnjak T., Vilotić D., Skakun P., Movrin D.,  Ranđelović S., Influence of Blank Shape to material Formability in Stretch Forming, Proceedings of the 4th International conference Mechanical Engineering in XXI century, pp. 347-352, april 19-20, 2018. Niš, Serbia 


    1. Ranđelović S., Milutinović M., Nikolić S. Movrin D., Application of FEM for injection molding process design, International conference on innovative technologies IN-TECH 2017, 11.-13.9.2017. pp.185-188, Ljubljana, Slovenia


    Ranđelović S., Movrin D., Milutinović M., Mladenović S., Blagojević V., Conterporary design and reconstructive engineering by FDM method, Proceedings 8th International Scientific Conference IRMES 2017, ISBN 978-9940-527-53-2, pp.157 – 160. Trebinje. BiH


     


    Blagojević V., Ranđelović S., Milanović S. Algorithm of prismatic objects optimal arrangement on a pallet, Proceedings of 6th International Conference Transport and Logistics TIL 2017, ISBN 978-86-6055-088-2, pp. 97-10. 25. – 26. May 2017. Niš


    Ranđelović S, Trajković M, Mladenović S, The bending technology design at higher precision, Proceedings of XIII DEMI conference, ISBN 978-99938-39-73-6, 26.-27. May 2017, Banja Luka.



     

    1. Blagojević V., Janković P., Ranđelović S.,  Application of Digital Sliding Modes to Synchronization of the Work of Two Pneumatic Semi Rotary Drives, XIII International SAUM Conference on Systems, Automatic Control and Measurements Niš, Serbia, November 09th-11th, 2016


    2. Ranđelović S., Milutinović M., Vukić M., Tanikić, D.: Analysis of Cooling System at Injection Molding Tool for Products with Different Geometry, Proceedings SIMTERM 2015, Sokobanja, October 20-23, 2015. pp. 649-654.

    3. Jovanović M., Milanović S., Blagojević V., Ranđelović S., Manojlović J., Forced Rayleigh-Benard convection in an inclined fluid layer, Proceedings SIMTERM 2015, Sokobanja, October 20-23, 2015. pp. 262-275.

    4. Ranđelović, S., Mišić, D., Mišić, M., Kostić, I., Tanikić, D. Software support for FMEA analysis in orthopaedic surgery, 12th MMA Flexible technologies, September 25-26, 2015. pp. 235-238, Novi Sad

    5. Ranđelović, S., Nikolić, S., Milutinović, M., Tanikić, D. Analysis of running system at injection molding tool for products with different geometry, 12th MMA Flexible technologies, September 25-26, 2015. pp.173-176, Novi Sad

    6. Ranđelović, S., Nikolić, S., Milutinović, M., Tanikić, D.: Analysis of running system at injection molding tool for products with different geometry, 12th MMA Flexible technologies, September 25-26, 2015. pp.173-176, Novi Sad


    7. Ranđelović, S., Nikolić, S., Milutinović, M., Vukić M., Jovanović M., Analysis of pressure field in injection molding tool, Proceedings of the 3rd International conference Mechanical Engineering in XXI century, september 17-18, 2015. Niš

    8. S. Ranđelović, S. Nikolić, M. Milutinović, "Cooling System Modeling for Injection Thermoplastic in Nonsymetry Tool" XI International SAUM Conference on Systems, Automatic Control and Measurements Niš, 2014, pp. 85-88, Niš
                 
    9. V. Blagojević, P. Janković, S. Ranđelović, "Application of Digital Sliding Modes to Synchronization of the Work of Two Hydraulic Cylinders", XI International SAUM Conference on Systems, Automatic Control and Measurements Niš, 2014, pp. 148-151, Niš

    10. D. Tanikić, M. Manić, S. Ranđelović, D. Đenadić, D. Brodić,  Determination of the characteristic transformation temperatures of the biocompatible shape memory alloys, International Academic Conference on Engineering, Internet and Technology, Prague 2014., pp. 35-40.

    11. S. Ranđelović, V. Blagojević, D. Tanikić, D. Đenadić, The modern technology packaging and opportunities for active promotion of products, TIL 2014, 5-6 Jun 2014. Serbia

    12. S. Randjelović, S. Nikolić, M. Milutinović, Analysis of thermodynamic parameters in the injection mold with metal inserts, 16th Symposium on Thermal Science and Engineering of Serbia, Sokobanja, October 22-25, 2013. Serbai

    13. S. Randjelović, S. Nikolić, M. Milutinović, Analysis of injection molding in the die cavity with metal inserts, 35. ICPE, 25-28. september, 2013, Kraljevo, Serbia

    14. Ranđelović S, Tanikić D, Djenadić D, The intelligent manufacturing, road to world class products in aluminium industry, 7th International Working Conference ‘’Total Quality Management – Advanced and Intelligent Approaches, 4th – 7th june, 2013. Beograd

    15. Ranđelović S, Tanikić D, Djenadić D, Measurement of Mechanical Loads in Experimental Tool for Cold Extrusion, XI International SAUM Conference on Systems, Automatic Control and Measurement, pp. 294-297, November 14th-16th, 2012. Niš, Serbia

    16. S. Randjelović, D. Movrin, M. Milutinović, Analysis of hot forging process in open tool, The 2nd international conference Mechanical Engineering in XXI Century, June 20.-21.2012,Niš, Serbia

    17. S. Randjelović, D. Mišić, M. Trajanović, N. Vitković, M. Veselinović, Customization of elements for orthopedic external and internal fixation, 5th International conference MCP CE 2012, September 19-21.2012. pp. 194-197, Novi Sad, Serbia

    18. Lazarević M, Lazarević D, Jovanović M, Ranđelović S, The application of adaptive FEM method to stress and strain analysis of cold forging process, 34th International conference on production engineering, pp.305-309, September 28-30. 2011, Niš, Serbia

    19. Milutinović M, Movrin D, Plančak M, Ranđelović S, Pepelnjak T,  Barišić B, Design of hot forging process of parts with complex geometry in digital environment, 15th International Research/Expert Conference” Trends in the Development of Machinery and Associated Technology” TMT 2011, pp. 101-104, Prague, Czech Republic, 12-18 September 2011.

    20. Ranđelović S, Trajanović M, Denić B, Generating new products according to international standards and competitive automotive market, The 7th IRMES, 27-28th April 2011, Zlatibor, Serbia, pp.39-42

    21. Lazarević D, Lazarević M, Ranđelović S, The adaptive FEM method to stress and strain following at forward extrusion hollow elements, The International Conference Mechanical Engineering in XXI Century, pp. 209-212, 25-26 November 2010, Nis, Serbia

    22. Stojković S, Madić M, Ranđelović S, Role of supply chain management in supplying customized products, Proceedings, pp. 149 - 152, ISBN 978-86-7892-277-0, 4th International Conference MCP - CE 2010, September 22-24, Novi Sad, Serbia

    23. Ranđelović S, Denić B, Mladenović S, Đorđević G, Aluminium industry, chance for mass customization and advancement of small enterprises, Proceedings, pp. 130 - 134, ISBN 978-86-7892-277-0, 4th International Conference MCP - CE 2010, September 22-24, Novi Sad, Serbia

    24. Milosavljević P, Ranđelović S, Radoičić G, The possibilities for improvement of the maintence processes in public utility service companies, Euro maintenance, XX International maintenance Conference, Proceedings pp. 330-334, may 12-14, 2010, Fiera di Verona, Italy

    25. Krumphals F., Sherstnev P., Mitsche S., Randjelovic S, Sommitsch C., "Physically Based Microstructure Modelling of AA6082 during Hot Extrusion", LATEST ADVANCES IN EXTRUSION TECHNOLOGY AND SIMULATION, 3rd EXTRUSION BENCHMARK, 16-17 september, 2009 Dortmund-Germany

    26. Ranđelović S, Milosavljević P, Sommitsch C, Sherstnev P, Technology of aluminium hot extrusion with support risk analysis,  pp. 184-189, MOTSP2009, 10-12. June, Sibenik 2009, Croatia

    27. Ranđelović S, Milosavljević P, The mass customization method for the new products of textile industry, International scientific conference, "Innovative solutions for sustainable development of textiles industry", Oradea 2009, Romenia

    28. Milosavljević P, Ranđelović S, Poosibility of improving production process in textile industry, International scientific conference, "Innovative solutions for sustainable development of textiles industry", Oradea 2009, Romenia


    29. S. Randjelović, "The new product development for mass customization on the base integrated process model" Proceedings, 3rd International Conference on Mass Customization and Personalization in Central Europe", Faculty of Technical Science in Novi Sad, pp. 149-153, Palic – Novi Sad, Serbia, June 3 - 6, 2008.

    30. P. Milosavljević, S. Ranđelović, S. Mladenović, "Promena kulture preduzeća kao posledica primene koncepta totalnog produktivnog održavanja", Zbornik radova sa Konferencije održavanja “KOD-2005”, Bar, 2005.

    31. S. Ranđelović, P. Milosavljević, S. Mladenović, "Production of aluminium structure with extrusion technology suport QFD method", Proceedings of Third International Working Conference "CIRP Total Quality Management - Advanced and Intelligent Approaches", Belgrade, 2005., CD, ISBN 86-7083-508-8

    32. S. Randjelović, V. Stoiljković, P. Milosavljević, "Improvement of the process of copper tubes extruding by fine adjustment of parameters on the hydraulic press", 4th international Symposium on intelligent manufacturing Systems, September 6-8, 2004, pp. 1207-1213, Department of Industrial Engineering, University Sakarya, Turkey

    33. S. Randjelović, S. Mladenović, V. Stoiljković, "Input parameters of metal forming process as precondition of high process capability", 4th International Conference ²Research and Development in Mechanical Industry² RaDMI 2004, 31. August - 04. September 2004, Zlatibor, Serbia and Montenegro

    34. P. Milosavljević, S. Randjelović, "Improvement of the Maintenance Process in Public Companies", 8th  INTERNATIONAL RESEARCH / EXPERT CONFERENCE "TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY" TMT 2004,  pp. 200-206, 15 - 19 September 2004, Neum, Bosnia and Hercegovina

    35. S. Randjelović, V. Stoiljković, Lj. Bogdanov, "Recognation and measuring the deformation of grain structure on extrusion sample", International conference on Computer Aided Design and Manufacturing CADAM '03, September 2003, Sibenik, Croatia

    36. S. Randjelović, V. Stoiljković, Lj. Bogdanov, "Metal flow Modeling at the Forward Extrusion in the Shape Changing Area", The 13th International DAAAM symposium "Intelligent Manufacturing &Automation: Learning from Nature", 23-26th, October 2002, Viena, Austria

    37. S. Randjelović, Lj. Bogdanov, "Application p-Adaptive Method to Follow of Small Deformations", "6th International Research / Expert Conference: Trends in the Development of machinery and Associated Technology" 18. i 22. September, 2002. Neum, Bosnia and Hercegovina

    38.S. Randjelović, Lj. Stojanović, V. Stoiljković, "The metal grain structure deformation in the forward extrusion process as a basis for neural network training", 3. International Conference on Industrial Tools, 22-26 April, 2001. Maribor - Rogaska Slatina, Slovenia

    39. Lj. Bogdanov, S. Randjelović, P. Janković, V. Milovanović, "Appendix to define bridge transition of forging tool for decrease force deformation and improve forge process", 5th  INTERNATIONAL RESEARCH / EXPERT CONFERENCE "TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY" TMT 2000, pp.200-206, 5th - 6th  October 2000, Zenica, Bosnia and Herzegovina

    40. V. Stoiljković, S. Randjelović, S. Mladenović, "Geometrijski model alata za oblikovanje cevi nestišljivim fluidom", 28nd International Conference of Production Engineering, 21st-23th September, 2000, Kraljevo - Mataruška Banja, Yugoslavia

    41. S. Randjelović, V. Stoiljković, "Analysis of Plastic Deformation on the Basis the Grain Microdeformation", 6th ICTP, September 19-24, 1999. Nuremberg, Germany

    42. V. Stoiljković, S. Randjelović, "Analysis of the tool loading during forward steel extrusion", 5. International Conference on Advanced Manufacturing Systems, Udine, Italy, June, 3 - 4.1999.

    43.V. Stoiljković, S. Randjelović, "The grain size analysis in the plastic deformation area during the forward steel extrusion", 2. International Conference on Industrial Tools, Maribor, Rogaska Slatina, Slovenia, April,18-22.1999.

    44. V. Stoiljković, S. Ranđelović, B. Stoiljković, "Object oriented lathe processing simulation approach", ESM 98, EUROPEAN simulation multiconference, Manchester, pp. 37-39.vol II, 16.-19. jun 1998.

    45. V. Stoiljković, B. Stoiljković, S. Mladenović, S. Ranđelović,  Simulacija procesa struganja na računaru, VI međunarodna konferencija fleksibilne tehnologije, Zbornik radova, str. 927-934, Sombor, 24-26 jun 1997.

     

     
  • Radovi na domaćim naučnim skupovima:

    1. Milutinović M, Vilotić D, Skakun P, Ranđelović S, Movrin D, Stefanović Lj, Vilotić M, Numeričke simulacije – moćne alatke u obrazovanju inženjera proizvodnog mašinstva, TREND 2020, Kopaonik, Srbija.


    Ranđelović S, Mišić Đ, Stanković N, Savremena auto industrija i neophodnost ispunjavanja najstrožijih zahteva kupaca ……, 15.-16. May 2017, Pozega.


    S. Nikolić, S. Ranđelović, FEM model brizganja termoplasta u nesimetričnom alatu, 39.JUPITER konferencija, str. 2.25-2.30. Beograd 2014.


    S. Randjelović, I. Kostić, D. Tanikić, D.Djenadić, Failure mode and effects analysis as support orthopedic surgery, ICTForum 2014, October 2014, pp. 147-150, Niš


    Djenadić D, Manić M, Tanikić D, Ranđelović S, Prikaz vrsta fiksatora i metoda obrade elemenata za fiksatore u medicini, JUPITER konferencija, 34. NU ROBOTI FTS, 15.16. maj, Beograd 2012


    Ranđelović S, Milosavljević P, Stanković B, Simulacija procesa istiskivanja aluminijuma primenom FEM adaptivnih metoda, str. 241-244, Zbornik radova, 33. Savetovanje proizvodnog mašinstva Srbije, Beograd 16-17 jun 2009.


    Stanković B, Milosavljević P, Ranđelović S, Prilog unapređenja procesa održavanja primenom metode TPM u industrijskoj energani, str. 275-278, Zbornik radova, 33. Savetovanje proizvodnog mašinstva Srbije, Beograd 16-17. jun 2009


    Milosavljević P, Ranđelović S, Mladenović S, Poboljšanje procesa održavanja u AD Nissal Niš, Zbornik XXXII Savetovanje proizvodnog mašinstva Srbije, CD, ISBN 978 – 86 – 7892 – 131-5, 2008, Novi Sad, Srbija, ISBN 978-86-7892-135-5


    S. Mladenović, B. Rančić, S. Randjelović, P. Milosavljević, "Optimizacija C spojnice za železničke šine primenom metode konačnih elemenata", Zbornik radova 12. Naučno stručna konferencija o železnici", Niš, 2006


    S. Randjelović, P. Milosavljević, S. Mladenović, "Integrisani procesni model za razvoj novog proizvoda", 32. JUPITER konferencija "Menadžment kvalitetom", Zlatibor, 2006., CD. ISBN 86-7083-558-4


    S. Mladenović, S. Randjelović, P. Milosavljević, "Parametarski pristup modeliranja tehnologije uzastopnog izvlačenja", Zbornik radova sa 31. JUPITER conference: “CAD/CAM”, Zlatibor, 2005., str. 2.51-2.54. ISBN 86-7083-508-8


    Lj. Bogdanov, S. Randjelović, "Prilog klasifikaciji mogućih defekata otkovaka kovanih u kalupima", "DEFORMACIJA STRUKTURA METALA I LEGURA" 26. i 27. jun, 2002. Beograd


    S. Randjelović, "Meshless metode u analizi izrazito nelinearnih procesa deformisanja", "DEFORMACIJA STRUKTURA METALA I LEGURA" 26. i 27. jun, 2002. Beograd


    S. Randjelović, "Virtualno modeliranj numerički upravljanog procesa glodanja", 27. JUPITER international conference, pp. 3.69-3.72, Jun 2001, Beograd, Yugoslavia


    Lj. Bogdanov, S. Randjelović, S. Jovanović, V. Milovanović, "Realizacija strogih zahteva izrade komponenti fluidne tehnike sa aspekta tehnoloških ograničenja", YUNG-2000, pp. 159-163, 27th - 29th September, 2000. Vrnjačka Banja, Yugoslavia


    Lj. Bogdanov, S. Randjelović, V. Milovanović, Lj. Milošević, "Analiza uticajnih faktora na obezbeđenje kvaliteta aluminijuma i aluminijumskih legura sa aspekta kovanja, presovanja i zavarivanja", IV conference metalurgy of Yugoslavia, 14-15. Oktober 1999, Zlatibor, Yugoslavia


    S. Randjelović, Lj. Bogdanov, "CAP modul kao neophodna podrška CAD sistema pri definisanju tehnologije zapreminskog oblikovanja", 25. JUPITER konferencija sa međunarodnim učešćem, Beograd, februar 1999.


    I. Mitić, S. Ranđelović, "Proizvodno mašinstvo sa aspekta novih komunikacionih tehnologija", 27. Savetovanje proizvodnog mašinstva Jugoslavije, Niš - Niška Banja, 23-25. septembar 1998.


    M. Pavlović, S. Mladenović, S. Ranđelović, "Projektovanje alata za duboko izvlačenje", 27. Savetovanje proizvodnog mašinstva Jugoslavije, Niš - Niška Banja, 23-25. septembar 1998.


    B. Stoiljković, S. Ranđelović, "Programsko rešenje za objektno orijentisani pristup u modeliranju procesa simulacije rezanja", 27. Savetovanje proizvodnog mašinstva Jugoslavije, Niš - Niška Banja, 23-25. septembar 1998.


    S. Ranđelović, V. Stoiljković, M. Manić, "Analiza opterećenja alata u procesima istosmernog istiskivanja", 27. Savetovanje proizvodnog mašinstva Jugoslavije, Niš - Niška Banja, 23-25. septembar 1998.


    V. Stoiljković, Lj. Stojanović, S. Ranđelović, "Primena veštačke inteligencije u oblasti plastične obrade metala", 27. Savetovanje proizvodnog mašinstva Jugoslavije, Niš - Niška Banja, 23-25. septembar 1998.


    Lj. Bogdanov, S. Ranđelović, V. Mijailović, "Uticaj specifičnog deformacionog otpora pri definisanju sile kovanja" X savetovanje valjaoničara Jugoslavije, str. 37-41, Beograd, 17-18. jun 1998.


    S. Ranđelović, V. Stoiljković, "Generisanje 3D modela gotovog dela u postupcima zapreminskog oblikovanja", 23. JUPITER konferencija, Zlatibor, februar 1998.


     


     


     


     
  • Tehnička rešenja:

    Saša Ranđelović, Srđan Mladenović, Analiza kontaktnih napona i simulacija procesa sabijanja za slučaj ravanskog deformacionog stanja (M85 softver)


    Saša Ranđelović, Srđan Mladenović, Modeliranje i simulacija efekta ojačavanja metala u procesima plastičnog deformisawa(M85 softver)
Poslednji put izmenjeno utorak, 27 april 2021 15:14
Objavljeno u Mašinski fakultet
nazad na vrh

povratak na vrh strane

© Naučne publikacije akademskog osoblja 2024