Dodatne informacije

• Lični podaci

• Datum rođenja: 04.11.1962.
• Mesto rođenja: Svrljig

• Obrazovanje

• Fakultet: Mašinski fakultet
• Odsek / Grupa / Smer: Hidroenergetika
• Godina diplomiranja: 1987, odbrana magistrature 1996, odbrana doktorata 2014.

• Spisak publikacija

• Knjige i udžbenici:

  B. Bogdanović, S. Milanović, Jasmina Bogdanović-Jovanović, KOMPRESORI - Termodinamika procesa sabijanja gasova, Mašinski fakultet u Nišu, ISBN 978-86-80587-71-4, NIš 2007.

  
  

  B. Bogdanović, S. Milanović, Jasmina Bogdanović-Jovanović, LETEĆI PNEUMATIČKI TRANSPORT, Mašinski fakultet u Nišu, ISBN 978-86-80587-92-9, Niš 2009.

  
  

  Jasmina Bogdanović-Jovanović, S. Milanović, TRANSPORT CEVIMA - Teorijske osnove sa primerima, Mašinski fakultet u Nišu, ISBN 978-86-6055-116-2, Niš 2019.

  
  

  Dobrica Milovanović, Jasmina Bogdanović-Jovanović, Saša Milanović, TRANSPORT FLUIDA - Teorija i primeri, Fakultet inženjerskih nauka u Kragujevcu, ISBN 978-86-6335-069-4, Kragujevac 2020.

• Radovi u časopisima sa IMPACT faktorom:

  Spasić Ž., Milanović S., Šušteršič V., Nikolić B., Low-pressure reversibile axiaol fan with straight profile blades and relatively high efficency, Thermal Scinence (2012), Vol. 16, Suppl. 2 pp. S593-S603.

  
  

  Jovanović M., Milenković D., Petrović G., Milić P., Milanović S., Theoretical and experimental analysis of dynamik processes of pipe branch for supply water to the pelton turbine, Thermal Science (2012), Vol. 16, Suppl. 2 pp. S612-S629.

  
  

  Milanović S., Jovanović M., Nikolić B., Blagojević V., The inflence f secondary flow in a two-phase gas-solid system in straight channels with a non-circular cross-section, Thermal Scinence (2016), Vol. 20, Suppl. 5, pp. S1419-S1434, (DOI:10.2298/TSCI16S5419M) .

  
  

  Saša M. Milanović, Miloš M. Jovanović, Živan T. Spasić, Boban D. Nikolić, Two-Phase Flow In Channels With Non-Circular Cross-Section Of Pneumatic Transport Of Powder Material, Thermal Scinence (2018), Vol. 22, Suppl. 5, pp. S1407-S1424. (doi.org/10.2298/TSCI18S5407M).

  
  

  B. Nikolić, B. Kegl, S. Milanović, M. Jovanović, M. Milošević, Effect of biodiesel on diesel engine emissions, Thermal Scinence (2018), Vol. 22, Suppl. 5, pp. S1483-S1498, (doi.org/10.2298/TSCI18S5483N).

  
  

  Živan Spasić, Miloš Jovanović, Jasmina Bogdanović-Jovanović, Saša Milanović, Numerical investigation of the influence of the doubly curved blade profiles on the reversible axial fan characteristics, Facta Universitatis, Series: Mechanical Engineering Vol. 18, No 1, (2020), pp. 57–68, https://doi.org/10.22190/FUME171128002S.

  
  

  Petrović, N., Bojović, N., Marinković, D., Jovanović, V., Milanović, S., A Two-Phase Model for the Evaluation of Urbanization Impacts on Carbon Dioxide Emissions from Transport in the European Union, Technical Gazette, (2023), Vol.30, No.2, pp 514-520, https://doi.org/10.17559/TV-20221018103946.

  
  

  Živan T. Spasić, Veljko S. Begović, Saša M. Milanovič, Miloš M. Jovanović, Aerodynamic performance of the reversible axial fan for high air temperatures, Thermal Science (2023) OnLine-First Issue 00, Pages: 135-135, https://doi.org/10.2298/TSCI230405135S. 

  
  

  Milos M. Jovanovic, Sasa M. Milanovic,  Zivan T. Spasic, Thermal drift in an inclined viscous fluid flow, Thermal Science (2023), OnLine-First Issue 00, Pages: 188-188 https://doi.org/10.2298/TSCI230427188J (doi: 10.2298/TSCI230427188).

• Radovi u ostalim časopisima:

  Bogdanović B., Milanović S., Solution of the direct problem in theory of flow through straight plane profile cascade by using coformal mapping into band , Fakta Universitatis, series: Mechanical Enginering, Vol. 1, N^o7, (2000), pp. 809-816, (M53=1.0, R63=1.0).

  
  

  Bogdanović B., Milanović S., Bogdanović-Jovanović J., Proračun pada pritiska u pravolinijskim deonicama  cevovoda visokopritisnog letećeg pneumatičkog transporta,  Procesing (2002), Subotica, str. 28-31, (M33=1.0, R54=1.0).

  
  

  Bogdanović B., Milanović S., Bogdanović-Jovanović J.: Uticaj tipa ventilatorskog kola na buku centrifugalnog ventilatora, Jugoslovenski naučno-stručni časopis "Procesna Tehnika" vol. 19 br .1, PROCESING 2003, (str. 165¸169), Zrenjanin.

  
  

  Bogdanović-Jovanović J., Milanović S., Bogdanović B., Ocena ekonomičnosti kontinualne regulacije protoka promenom broja obrtaja ventilatorskog kola i zakretanjem lopatica sprovodnog aparata kod centrifugalnih ventilatora velike snage, Jugoslovenski naučno-stručni časopis "Procesna Tehnika" vol.20 br.2-3, PROCESING 2004, (str. 121¸125),

  
  

  Bogdanović B., Bogdanović-Jovanović J., Spasić Ž., Milanović S., Reversible axial fan with blades created of slightly distorted panel profiles, Fakta Universitatis, series: Mechanical Enginering, Vol. 7, N^o1, (2009), pp. 23-36. (M53=1.0, R63=1.0).

  
  

  Ristić B., Milanović S.: Korišćenje obnovljivih i nekonvencionalnih izvora energije, Energija br. 3 – 4, (str. 32 ¸ 40), BEOGRAD 1997.

  
  

  Milanović S., Ristić B. : Uticaj obnovljivih i alternativnih izvora energije na ekologiju,  Energija br. 3 - 4, (str. 42¸47), BEOGRAD  2000.

  
  

  Boban N., Jovanović M., Milošević M., Milanović S., Function k-as a link between fuel flow velocity and fuel pressure, depending on the type of fuel, Fakta Universitatis Series Mechanical Enginering, 2016. Vol. 1, N^o7, (2016), pp. 809¸816, (DOI: 10.22190/FUME160628003N).

  
  

  Živan Spasić, Miloš Jovanović, Jasmina Bogdanović-Jovanović, Saša Milanović, Numerical investigation of the influence of the doubly curved blade profiles on the reversible axial fan characteristics, Facta Universitatis, DOI:10.22190/FUME171128002S, 2018 http://casopisi.junis.ni.ac.rs/index.php/FUMechEng/issue/view/543 .

  
  

  Saša Milanović, Miloš Jovanović, Živan Spasić, Boban Nikolić,  Two-Phase Turbulent Flow In Straight Horizontal Channels With A Square Cross-Section Taking Into Account The Influence Of Vertical Forces, Facta Universitatis, Series: Working and Living Environmental Protection Vol. 15, No 1, pp. 19 - 34, ISSN:0354-804X(Print) ISSN:2406-0534(Online), 2018. doi.org/10.22190/FUWLEP1801019M.

  
  

  Saša Milanović, Miloš Jovanović, Jasmina Bogdanović Jovanović, Živan Spasić, Boban Nikolić,  Determining flow velocity through straight planar profile cascades by using conformal mapping onto band,  Innovative Mechanical Engineering, University of Niš, Faculty of Mechanical Engineering, VOL. 2, No.1, (2023), pp. 86-94, Original scientific paper. ISSN 2812-9229.

  
  

  Miloš Jovanović, Saša Milanović, Živan Spasić, The horizontal convection of an inclined viscous fluid flow,  Innovative Mechanical Engineering, University of Niš, Faculty of Mechanical Engineering, VOL. 1, N^o.3, (2023), pp. 49-60,  ISSN 2812-9229 Original scientific paper.

• Radovi na naučnim skupovima međunarodnog značaja:

  Bogdanović B. , Milanović S. : Proračun strujanja u hidrodinamičkoj spojnici, Zbornik radova  XIX  kongresa teorijske i primenjene mehanike , Sv. B-47, (str. 263¸269), OHRID 1990.

  
  

  Bogdanović B., Milanović S.: Radne karakteristike ventilatora pri radu sa elektro motorom jednosmerne struje sa permanentnim magnetom, XX  Jugoslovenski kongres teorijske i primenjene mehanike, Zbornik radova, (str. 310¸313), Mašinski fakultet  KRAGUJEVAC 1993

  
  

  Bogdanović B., Milanović S.: Određivanje rasporeda brzine po konturi prave ravanske rešetke konformnim preslikavanjem strujanja na pojas,  XXI Jugoslovenski kongres teorijske i primenjene mehanike, NIŠ  1995.

  
  

  Bogdanović B., Milanović S., The basic problems in the realization of the numerical program for predction of potential flow through straight plane cascade of profiles by conformal mapping of flow into ban, II  International Symposium "Contemporary Problems of Fluid Mechanics", Beograd (1996), Conference proceedings, pp. 193-196, (M33=1.0, R54=1.0).

  
  

  Bogdanović B., Milanović S., Određivanje rasporeda brzine po konturi profila prave ravanske rešetke konformnim preslikavanjem strujanja na pojas  i problemi koji su pratili realizaciju programa za rešavanje zadatka na računaru, XXII Jugoslovenski kongres teorijske i primenjene mehanike, Vrnjačka Banja (1997), Zbornik radova, str. 57-62, (M33=1.0, R54=1.0).

  
  

  Bogdanović B., Milanović S., Bogdanović-Jovanović J., Proračun pada pritiska u pravolinijskim deonicama  cevovoda visokopritisnog letećeg pneumatičkog transporta,  Procesing (2002), Subotica, str. 28-31, (M33=1.0, R54=1.0).

  
  

  Bogdanović B., Milanović S., Bogdanović-Jovanović J.: Uticaj tipa ventilatorskog kola na buku centrifugalnog ventilatora, XXVII  Kongres o procesnoj industriji, (str. 165¸169), PROCESING 2003, ZRENJANIN 2003.

  
  

  Bogdanović-Jovanović J., Milanović S., Bogdanović B., Ocena ekonomičnosti kontinualne regulacije protoka promenom broja obrtaja ventilatorskog kola i zakretanjem lopatica sprovodnog aparata kod centrifugalnih ventilatora velike snage, XXVIII Kongres o procesnoj industriji, (str. 121¸125), PROCESING 2004, BEOGRAD 2004.

  
  

  Bogdanović B., Bogdanović-Jovanović J., Milanović S., Matematički model simulacije rada mreže navodnjavanja kišenjem, 12 Simpozijum Termičara SCG, SIMTERM (2005), SOKOBANJA , Zbornik radova, (M33=1.0, R54=1.0).

  
  

  Bogdanović B., Bogdanović-Jovanović J., Milanović S., Proračun pada pritiska transportnog vazduha pri izotermskom i neizotermskom letećem pneumatičkom transportu, SIMTERM (2009), SOKOBANJA , Zbornik radova, (M33=1.0, R54=1.0)

  
  

  Bogdanović B., Bogdanović-Jovanović J., Milanović S., Calculation of operating parameters for different numbers of revolutions, considering the influence of Reynolds number, Simpozijum Termičara Srbije, SIMTERM, SOKOBANJA, (2011), (M33=1.0, R54=1.0)

  
  

  Bogdanović B., Bogdanović-Jovanović J., Milanović S., Spasić Ž., Pressure drop calculation of transport air in rectilinear pipeline sections in the high presure pneumatic converying, The second international conference-Mechanical Engineering in the XXI Century (2013), Conference proceedings, pp. 159-162, (M33=1.0, R54=1.0).

  
  

  Tomić V., Nikolić B., Milanović S., Milošević M., How to implement european regulations of homologations to vehicle market in Serbia, case of exterior mirrors, International conference on traffic and transport engineering ICTTE, Proceeding, City Net Scientific Research Center Ltd. Belgrade, Serbia; Faculty of Transport and Traffic Engineering, University of Belgrade, Serbia, vol. , no. , pp. 765 - 771, issn: 978-86-916153-2-1, udc: , doi: , isbn  : 978-86-916153-2-1, Србија, 27. - 28. Nov, 2014.

  
  

  M. Jovanović, B. Nikolić, S. Milanović, Rayleigh Benard Convection Secondary Instability in Presence of Temperature Perturbations on The Lower Plate, 5^th International Congress of Serbian Society of Mechanics  Arandjelovac, Serbia, June 15-17, 2015.

  
  

  M. Jovanović, S. Milanović, V. Blagojević ,S. Ranđelović, J. Manojlović, Forced Rayleigh-Benard convection in an inclined fluid layer, 17^th Symposium on Thermal Science and Engineering of Serbia, pp 265-272,  Society of Thermal Engineers of Serbia,  Faculty of Mechanical Engineering in Niš, Sokobanja, Serbia, October 20–23, 2015.

  
  

  B. Nikolić, P. Milić, M. Milošević, S. Milanović, Ecological and economic aspects of installing devices and equipment for LPG-fuelled vehicles, 17^th Symposium on Thermal Science and Engineering of Serbia, Society of Thermal Engineers of Serbia, pp 1115-1122,  Faculty of Mechanical Engineering in Niš, Sokobanja, Serbia, October 20–23, 2015.

  
  

  Vladislav Blagojević, Miodrag Stojiljković, Saša Milanović, Cost Effectiveness of Restoring Energy in the Execution Part of Conventional Pneumatic System With Semi Rotary Actuator, The 3^rd International Conference Mechanical Engineering in XXI Century, Faculty of Mechanical Engineering Nis, pp. 375 - 378, isbn: 978-86-6055-072-1, Nis, 17 - 19. Sep, 2015.

  
  

  V. Tomić, B. Nikolić, S. Milanović, M. Milošević, Cost effectiveness of restoring energy in the execution part of conventional pneumatic system with semi rotary actuator, The third International Conference Mechanical Enginering in the XXI Century, Faculty of Mechanical Engineering  Niš, Vol.1, No.III, pp 375-378, ISSN:978-86-6055-072-1, UDC:, DOI:, Srbija 17-19 Sep., 2015.

  
  

  Saša Milanović, Miloš Jovanović, Jasmina Bogdanović Jovanović, Boban Nikolić, Turbulent Two-Phase Flow of Granular Material in Straight Channels of Non-Circular Cross-Section, The Sixth International Conference Transport And Logistics, Proceedings, University of Niš, Faculty of Mechanical Engineering Niš, pp.67-72, ISBN: 978-86-6055-088-2, Serbia, 25-26 May 2017.

  
  

  Vladislav Blagojević, Saša Ranđelović, Saša Milanović, Algorithm of Prismatic Objects Optimal Arrangement on a Pallet, The Sixth International Conference Transport And Logistics, Proceedings, University of Niš, Faculty of Mechanical Engineering Niš, pp.97-100, ISBN: 978-86-6055-088-2, Serbia, 25-26 May 2017.

  
  

  Jasmina Bogdanović-Jovanović, Saša Milanović,  Design of Gravity Pipeline System for the Transport of Clean Drinking Water, The Sixth International Conference Transport And Logistics, Proceedings, University of Niš, Faculty of Mechanical Engineering Niš, pp.155-158, ISBN: 978-86-6055-088-2, Serbia, 25-26 May 2017.

  
  

  Saša M. Milanović, Miloš M. Jovanović, Boban D. Nikolić, Živan T. Spasić, Solid Particles Velocity Distribution in Pneumatic Transport of Granular Materials in Channels With a Noncircular Cross Section Taking Into Account Secondary Flow, 6^th International Congress of Serbian Society of Mechanics,  pp. 1-10, ISBN: 978-86-909973-6-7, Tara, Serbia, 19-21 June 2017.

  
  

  Miloš M.Jovanović, Boban D.Nikolić, Saša Milanović, Živan Spasić, Forced Rayleigh Benard Convection Secondary Instability in Presence of Temperature Modulation on Both Plates, 6^th International Congress of Serbian Society of Mechanics,  pp., ISBN: 978-86-909973-6-7, Tara, Serbia, 19-21 June 2017.

  
  

  Saša Milanović, Miloš Jovanović, Vladislav Blagojević, Solid Phase Velocity Distribution of Two-Phase Turbulent Flow at Preumatic Transport in Straight Channels of Quadratic Cross, 13^th Intenational Conference on Accomplishments in Mechanical and Industrial Engineering, Proceedings, University of Banja Luka, Faculty of Mechanical Engineering Banja Luka, pp. 545-550, ISBN: 978-99938-39-72-9, Banja Luka, 26-27 May 2017.

  
  

  Saša Milanović, Miloš Jovanović, Boban Nikolić, Vladislav Blagojević,  Two-Phase Gas-Solid Flow in Horizontal Channels with a Square Cross-Section Considering Secondary Flow, 18^th Symposium on Thermal Science and Engineering of Serbia, Proceedings, University of Niš, Faculty of Mechanical Engineering Niš, Sokobanja, pp. 486-495, ISBN 978-86-6055-098-1, Serbia, 17-20 October, 2017.

  
  

  Živan Spasić, Jasmina Bogdanović-Jovanović, Saša Milanović, Vladislav Blagojević,Veljko Begović, Numerical Investigation of the Influence of the Shape of the Straight Profile on the Reversible Axial Fan Performance, 18^th Symposium on Thermal Science and Engineering of Serbia, Proceedings, University of Niš, Faculty of Mechanical Engineering Niš, Sokobanja, pp. 631-640, ISBN 978-86-6055-098-1, Serbia, 17-20 October, 2017.

  
  

  Vladislav Blagojević, Saša Milanović, Živan Spasić,  Miloš Jovanović, Application of Digital Sliding Modes to Synchronization of the Work of Several Pneumatic Semi Rotary Drives, 18th Symposium on Thermal Science and Engineering of Serbia, Proceedings, University of Niš, Faculty of Mechanical Engineering Niš, Sokobanja, pp. 831-836, ISBN 978-86-6055-098-1, Serbia, 17-20 October, 2017.

  
  

  Vladislav Blagojević, Saša Ranđelović, Saša Milanović, Application of Digital Sliding Modes to Synchronization of the Work of Two Pneumatic Rodless Cylinders, XVII International Scientific Conference on Industrial Systems, Proceedings, University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, pp. 92-96, ISBN 978-86-7892-978-6,  Novi Sad, 4-6 October, 2017.

  
  

  Saša Milanović, Miloš Jovanović, Vladislav Blagojević, Boban Nikolić, The Influence of Vertical Forces at Pneumatic Transport of Granular Material in Horizontal Channels of Noncircular Cross Sections, The 4^th international conference Mechanical Engineering in the XXI Century, Conference proceedings, pp. 27¸32, April 19-20 2018. ISBN 978-86-6055-103-2.

  
  

  Miloš Jovanović, Saša Milanović, Boban Nikolić, Spatially Periodic Temperature Modulation of Incompressible Flow in Oberbeck-Bousinesq Approximation, The 4^th international conference Mechanical Engineering in the XXI Century, Conference proceedings, pp. 46¸50, April 19-20 2018.

  
  

  Vladislav Blagojević, Saša Ranđelović, Saša Milanović, Experimental Model for Pneumatic Actuators Synchronization, The 4^th international conference Mechanical Engineering in the XXI Century, Conference proceedings, pp. 335¸338, April 19-20, 2018.

  
  

  V. A. Blagojević, S. S. Ranđelović, S. M. Milanović,  Automatic Generation of PLC Programs For Pneumatic Actuators Sequential Control With Two End Positions, XIV International SAUM Conference on Systems, Automatic Control and Measurements, Conference proceedings, Niš, Serbia, November 14^th-16^th, 2018.

  
  

  Veljko Begović, Živan Spasić, Saša Milanović, Analysis and determination of the performance of centrifugal pump using numerical simulations, 14th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology, DEMI 2019, Banja Luka, 24-25 May 2019; (ISBN 978-99938-39-84-2, Book Abstract: page 56) ISBN 978-99938-39-85-9, COBISS.RS-ID 8146456, Proceedings: pp 335-340). 

  
  

  Saša Milanović, Vladislav Blagojević, Miloš Jovanović, Boban Nikolić, The Influence of Vertical Forces According Two-Phase Turbulent Flow in Straight Horizontal Channels With a Square Cross-Section,19th International Conference on Thermal Science and Engineering of Serbia, Niš, Sokobanja, pp. 487-495, ISBN 978-6055-124-7, Serbia, 22-25 October, 2019.

  
  

  B. Nikolić, B. Kegl, M. Jovanović, S. Milanović, J. Dorić, Influence of biodiesel on the performance of diesel fuel injection system, 19th International Conference on Thermal Science and Engineering of Serbia, Niš, Sokobanja, Serbia, 22-25 October, 2019. ISBN 978-86-6055-124-7 Proceedings: pp. 993-999.   

  
  

  Đorđe MILANOVIĆ,  Saša MILANOVIĆ,  Vladislav BLAGOJEVIĆ,  Danijel MARKOVIĆ, Assistive Technologies And Urban Mobility Problems Of Disabled People In Nis, THE SEVENTH INTERNATIONAL CONFERENCE TRANSPORT AND LOGISTICS 2019, pp 139-142, Niš 2019.

  
  

  Vladislav BLAGOJEVIĆ , Saša MILANOVIĆ, Model Of The Electropneumatic Festo Motion Terminal, THE SEVENTH INTERNATIONAL CONFERENCE TRANSPORT AND LOGISTICS 2019, pp 157-160, Niš 2019.

  
  

  Živan Spasić, Veljko Begović, Miloš Jovanović, Saša Milanović, Numerical Research into the Influence of Impeller Reduction on Centrifugal Pump Performance, The 5th International Conference Mechanical Engineering in XXI Century, Conference Proceedings, pp 123-126Niš, December 09-10. 2020.

  
  

  Vladislav Blagojević, Saša Ranđelović, Saša Milanović, The Expert System for Investigation of Hydraulic and Pneumatic Combinatory Automata - CAR-ex, he 5th International Conference Mechanical Engineering in XXI Century, Conference Proceedings, pp 267-272, December 09-10. 2020.

  
  

   Miloš M. Jovanović,  Saša M. Milanović, Živan T. Spasić,  Natural convection due to lower plate temperature nonuniformity, 8th International Congress of the Serbian Society of Mechanics, Faculty of Engineering Kragujevac, Serbian Society of Mechanics, Proceedings ISBN: 978-86-90993-8-1, Kragujevac, 28-30. Jun, (2021), pp. 115 - 124.

  
  

  Miloš Jovanović, Saša Milanović, Aleksandar Boričić, Živan Spasić, Temperature spatial modulation of an inclined viscous fluid flow, The 20th International Conference on Thermal Science and Engineering of Serbia, Niš, Serbia, October 18–21, (2022), Proceedings, ISBN 978-86-6055-163-6, pp 459-474).

  
  

  Jasmina Bogdanović-Jovanović, Saša Milanović, Živojin Stamenković, Miloš Jovanović, Jelena Petrović, Miloš Kocić, Numerical Approach to the Calculation of Sprinkler Irrigation Systems,  XVI International SAUM Conference on Systems, Automatic Control and Measurements, Niš, Serbia, November 17th-18th, (2022), Proceedings, ISBN ISBN 978-86-6125-258-7, pp. 153-156.

  
  

  M. Jovanović, S. Milanović, and Ž. Spasić, Temperature Spatial Modulation in a Slot Fluid Flow, XVI International SAUM Conference on Systems, Automatic Control and Measurements, Niš, Serbia, November 17th-18th, (2022), Proceedings, ISBN ISBN 978-86-6125-258-7, pp. 148-152,

• Radovi na domaćim naučnim skupovima:

  Milanović S.: Bočne sile na klip razvodnika, Zbornik radova Mašinskog fakulteta, (str. 59¸67), NIŠ 1995 .

  
  

  Bogdanović B., Milanović S.: Određivanje kinematskih karakteristika strujanja kroz prave  ravanske rešetke profila konformnim  preslikavanjem strujanja na pojas, Zbornik radova Mašinskog fakulteta, (str.49 ¸58), NIŠ 1995.

  
  

  Bogdanović B., Milanović S.: Procesi sabijanja i širenja gasa u hidro-pneumatskim akumulatorima,  Zbornik radova HIPNEF 96, (str. 139¸144), VRNJAČKA BANJA 1996.

  
  

  Milanović S., Ristić B.: Novi obnovljivi alternativni izvori energije za XXI vek, Savetovanje na temu: "MOGUĆNOSTI RAZVOJA ENERGETIKE NA PRAGU XXI VEKA U SVETLU DRUŠTVENO-EKONOMSKOG RAZVOJA JUGOSLAVIJE", Zbornik radova, (str. 137 ¸142), KOPAONIK 1997.

  
  

  Ristić B., Milanović S.: Otpadni materijal energetski i sirovinski resurs budućnosti, Savetovanje na temu: "MOGUĆNOSTI RAZVOJA ENERGETIKE NA PRAGU XXI VEKA U SVETLU DRUŠTVENO-EKONOMSKOG RAZVOJA JUGOSLAVIJE", Zbornik radova, (str. 143 ¸152), KOPAONIK 1997.

  
  

  Milanović S., Bogdanović B., Spasić Ž.: Uzroci i mesta najčešćih oštećenja na magistralnim naftovodima , XXIII Međunarodna konferencija o zaštiti radne i životne sredine i prevenciji invalidnosti , Zbornik radova, (str. 159 ¸164), HERCEG NOVI 1998.

  
  

  Bogdanović B., Spasić Ž., Milanović S.: Automatska regulacija ventilatora glavnog provetravanja rudnika, XXIII Međunarodna konferencija o zaštiti radne i životne sredine i prevenciji invalidnosti , Zbornik radova, (str. 153 ¸158), HERCEG NOVI 1998.

  
  

  Spasić Ž.,Bogdanović B., Milanović S.: Proračun vremena zaleta hidrodinamičke spojnice pogonjene elektromotorom, Zbornik radova HIPNEF '98, (str 33¸38), BEOGRAD 1998.

  
  

  Milanović S., Bogdanović B., Spasić Ž.:  Uzroci i mesta najčešćih oštećenja armature i pumpnih stanica magistralnih naftovoda, XXV Međunarodna konferencija o zaštiti radne i životne sredine i prevenciji invalidnosti, NIŠKA BANJA 2000.

  
  

  Milanović S., Bogdanović B., Spasić Ž.: Voda kao obnovljivi izvor energije, Vodovod i kanalizacija 2001, NOVI SAD 2001.

  
  

  Bogdanović B., Milanović S.: Izbor hidrodinamičke spojnice koja omogućava korišćenje kaveznih umesto kliznokolutnih elektromotora, Zbornik radova HIPNEF '02, (str. 125¸130), VRNJAČKA BANJA 2002.

  
  

  Spasić Ž., Bogdanović B., Milanović S.: Regulacija režima rada pumpe pomoću regulacione hidrodinamičke spojnice, Zbornik radova sa 13. Savetovanja Jugoslovenskog društva za hidraulička istraživanja, (str. III-79 ¸ III-84),  SOKOBANJA 2002.

  
  

  Bogdanović B., Bogdanović-Jovanović J., Milanović S., Akustičke karakteristike centrifugalnih ventilatora i njihov proračun po teoriji sličnosti, Naučno-stručni skup sa međunarodnim učešćem IRMES 04, (str. 459¸464), 16¸17 septembar 2004, KRAGUJEVAC 2004.

  
  

  Bogdanović B., Bogdanović-Jovanović J., Milanović S.: Preračunavanje karakteristika zapreminskog stepena korisnosti kod uljnih pumpi i hidromotora, Zbornik radova HIPNEF '04, (str.  65¸71), VRNJAČKA BANJA 2004.

  
  

  Bogdanović-Jovanović J., Bogdanović B.,  Milanović S.: Algoritam numeričkog proračuna radnih karakteristika zajedničkog rada elektromotora i hidrodinamičke spojnice, Zbornik radova HIPNEF '04, (str.  333¸338), VRNJAČKA BANJA 2004.

  
  

  Milenković D., Boričić Z., Stamenković Ž., Milanović S., Energetska efikasnost pumpnih postrojenja za povišenje pritiska, Zbornik radova HIPNEF '09, (str. 219¸226), VRNJAČKA BANJA 2008.

  
  

  Milenković D., Boričić Z., Stamenković Ž., Milanović S.,Energetska efikasnost pumpnih postrojenja za povišenje pritiska, HIPNEF '09, Vrnjačka Banja (2008), Zbornik radova str. 219-226, (M63=0.5, R65=0.5).

  
  

  Milanović S., Nikolić B., Milošević M., Boričić A., Marković D., Pribak D., Testing of Individually Produced Light Trailer of Special Purpose, Scientific-Expert Conference on Vehicle Testing in The Republic of Serbia, Beograd 2016. 

  
  

  Milić P., Nikolić B., Milošević M., Milanović S., Petrović N., Jovanović M., Blagojević V., Software Support for Vehicle Driven on TNG Testing, Scientific-Expert Conference on Vehicle Testing in The Republic of Serbia, Beograd 2016.

• Tehnička rešenja:

  Konstruktivno unapredjenje sporohodog radnog kola centrifugalne pumpe u cilјu proširenja oblasti rada i pobolјšanja kavitacionih karakteristika", autori: Nikodijević Dragiša, Milenković Dragica, , Boričić, Aleksandar, Milanović Saša, razvijeno u okviru projekta tehnološkog razvoja, br. TR14032, rukovodilac prof. dr Nikodijević Dragiša. Tehničko rešenje usvojeno od strane Mašinskog fakulteta u Nišu, jun 2010, br. odluke 612‐325‐3‐10/2010. 

  
  

  Niskopritisni aksijalni reverzibilni ventilator sa lopaticama koje imaju dvostruku krivinu skeletnice profila" autori: dr Živan Spasić, dr Božidar Bogdanović, dr Dragica Milenković, dr Saša Milanović, dr Živojin Stamenković, razvijeno u okviru projekta tehnološkog razvoja, br. TR18012, rukovodilac prof. dr Božidar Bogdanović. Tehničko rešenje usvojeno od strane Mašinskog fakulteta u Nišu, 16.01.2015, br. odluke 612‐96‐ 1‐6/2015.

  
  

  Softver za ispitivanje/kontrolisanje motornih vozila sa pogonom na tečni naftni gas", autori: Predrag Milić, Boban Nikolić, Miloš Milošević, Saša Milanović, Goran Petrović, Danijel Marković, Vojislav Tomić, Nikola Petrović, Tehničko rešenje usvojeno od strane Mašinskog fakulteta u Nišu, 16.01.2015, br. odluke 612‐96‐ 1‐11/2015.