Dodatne informacije

• Lični podaci

• Datum rođenja: 01.01.1976.
• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Mašinski fakultet u Nišu
• Odsek / Grupa / Smer: Mašinske konstrukcije i mehanizacija
• Godina diplomiranja: 1999.

• Spisak publikacija

• Monografije i poglavlja u monografijama:
  
  
  1. Marinković D., 2007, A New Finite Composite Shell Element for Piezoelectric Active Structures, Otto-von-Guericke Universität Magdeburg, Fortschritt-Berichte VDI, Reihe 20: Rechnerunterstützte Verfahren, Nr. 406, Düsseldorf, 2007.
  
  
  2. Marinković Z., Petrović G., Marinković D., 2007, Simulation model for the analytical load determination of machine elements, MACHINE DESIGN - monograph, Kuzmnović S. (Ed.), University of Novi Sad – Faculty of Tehnical Sciences, ADEKO, Novi Sad, pp. 389 – 394.
  
  
  3. Marinković D., Marinković Z., 2008, Active Composite Laminates – a Step Forward in Structural Design and Performance, MACHINE DESIGN - monograph, Kuzmnović S. (Ed.), University of Novi Sad – Faculty of Tehnical Sciences, ADEKO, Novi Sad, pp. 115-120.
  
  
  4. Marinković D., Marinković Z., 2009, Aspects of Modeling Flexibile Bodies in Design of Mechanisms, MACHINE DESIGN - monograph, Kuzmnović S. (Ed.), University of Novi Sad – Faculty of Tehnical Sciences, ADEKO, Novi Sad, pp. 187-192.
  
  
• Radovi u časopisima sa IMPACT faktorom:
  
  
  1. Marković D., Stanković A., Marinković D., Pamučar D., 2024, Metaheuristic Algorithms for the Optimization of Integrated Production Scheduling and Vehicle Routing Problems in Supply Chains, Tehnicki Vjesnik, 31 (3), pp. 800 – 807.
  
  
  2. Božanić D., Epler I., Puška A., Biswas S., Marinković D., Koprivica S.. 2024, Application of the DIBR ii – rough MABAC decision-making model for ranking methods and techniques of lean organization systems management in the process of technical maintenance, Facta Universitatis, Series: Mechanical Engineering, 22 (1), pp. 101 – 123.
  
  
  3. Turudija R., Stojkovic M., Stojkovic J., Arandjelovic J., Marinkovic D., 2024, Stiffness of Anatomically Shaped Lattice Scaffolds Made by Direct Metal Laser Sintering of Ti-6Al-4V Powder: A Comparison of Two Different Design Variants, Metals 14 (2), 219.
  
  
  4. Barać M., Vitković N., Marinković D.,  Stan S.-D-., Simonović M., Miltenović A., Tomić M., 2024, Decision Support System for Managing Marshalling Yard Deviations, Acta Polytechnica Hungarica 21 (1), pp. 121-134.
  
  
  5. Badali V., Checa S., Zehn M.M., Marinkovic D., Mohammadkhah M., 2023, Computational design and evaluation of the mechanical and electrical behavior of a piezoelectric scaffold: a preclinical study, Frontiers in Bioengineering and Biotechnology, 11, 1261108
  
  
  6. Babič M., Marinković D., 2023, A New Approach to Determining the Network Fractality with Application to Robot-Laser-Hardened Surfaces of Materials, Fractal and Fractional, 7 (10), 710.
  
  
  7. Stojković J.R., Stojković M., Turudija R., Aranđelović J., Marinkovic D., 2023, Adjustable Elasticity of Anatomically Shaped Lattice Bone Scaffold Built by Electron Beam Melting Ti6Al4V Powder, Metals, 13 (9), 1522.
  
  
  8. Gopal P.M., Kavimani V., Gupta K., Marinkovic D., 2023, Laser-Based Manufacturing of Ceramics: A Review, Micromachines, 14 (8), 1564.
  
  
  9. Habib A., Khan Z.A., Riaz M., Marinkovic D., 2023, Performance Evaluation of Healthcare Supply Chain in Industry 4.0 with Linear Diophantine Fuzzy Sine-Trigonometric Aggregation Operations, Mathematics, 11 (12), 2611.
  
  
  10. Zhang X., Li Y., Hong T., Tegeltija S., Babić M., Wang X., Ostojić G., Stankovski S., Marinković D., 2023, Response Characteristics Study of Ethylene Sensor for Fruit Ripening under Temperature Control, Sensors, 23 (11), 5203.
  
  
  11. Biswas S., Sanyal A., Božanić D., Puška A., Marinković D., 2023, Critical Success Factors for 5G Technology Adaptation in Supply Chains, Sustainability, 15 (6), 5539.
  
  
  12. Trifunović M., Madić M., Marinković D., Marinković V., 2023, Cutting Parameters Optimization for Minimal Total Operation Time in Turning POM-C Cylindrical Stocks into Parts with Continuous Profile Using a PCD Cutting Tool, Metals, 13 (2), 359.
  
  
  13. Phiri R., Rangappa S.M., Siengchin S., Marinkovic D., 2023, Agro-waste natural fiber sample preparation techniques for bio-composites development: methodological insights, Facta Universitatis, Series: Mechanical Engineering, 21 (4), pp. 631 – 656.
  
  
  14. Puška A., Štilić A., Božanić D., Đurić A., Marinkovic D., 2023, Selection of EVs as Tourist and Logistic Means of Transportation in Bosnia and Herzegovina's Nature Protected Areas Using Z -Number and Rough Set Modeling, Discrete Dynamics in Nature and Society, 2023, 5977551.
  
  
  15. Biswas S., Božanić D., Pamučar D., Marinković D., 2023, A spherical fuzzy based decision making framework with Einstein aggregation for comparing preparedness of SMES in quality 4.0, Facta Universitatis, Series: Mechanical Engineering, 21 (3), pp. 453 – 478.
  
  
  16. Farid H.M.A., Riaz M., Almohsin B., Marinkovic D., 2023, Optimizing filtration technology for contamination control in gas processing plants using hesitant q-rung orthopair fuzzy information aggregation, Soft Computing, doi: 10.1007/s00500-023-08588-w.
  
  
  17. Miškić S., Stević Ž., Marinković D., 2023, Evaluating the efficiency of a transport company applying an objective-subjective model, International Journal of Management Science and Engineering Management, 18 (4), pp. 277 – 291.
  
  
  18. Bouraima M.B., Qiu Y., Stević Ž., Marinković D., Deveci M., 2023, Integrated intelligent decision support model for ranking regional transport infrastructure programmes based on performance assessment, Expert Systems with Applications, 222, 119852.
  
  
  19. Milić P., Marinković D., Klinge S., Ćojbašić Ž., 2023, Reissner-Mindlin Based Isogeometric Finite Element Formulation for Piezoelectric Active Laminated Shells, Tehnicki Vjesnik, 30 (2), pp. 416 – 425.
  
  
  20. Trifunović M., Madić M., Marinković D., Marinković V., 2023, Cutting Parameters Optimization for Minimal Total Operation Time in Turning POM-C Cylindrical Stocks into Parts with Continuous Profile Using a PCD Cutting Tool, Metals, 13 (2), 359.
  
  
  21. Jovanovć V., Janošević D., Marinković D., Petrović N., Pavlović J., 2023, Railway Load Analysis During the Operation of an Excavator Resting on the Railway Track, Acta Polytechnica Hungarica, 20 (1), pp. 79 – 93.
  
  
  22. Tica M., Vrcan Ž., Troha S., Marinković D., 2023, Reversible Planetary Gearsets Controlled by Two Brakes, for Internal Combustion Railway Vehicle Transmission Applications, Acta Polytechnica Hungarica, 20 (1), pp. 95 – 108.
  
  
  23. Petrović N., Bojović N., Marinković D., Jovanović V., Milanović S., 2023, A Two-Phase Model for the Evaluation of Urbanization Impacts on Carbon Dioxide Emissions from Transport in the European Union, Tehnicki Vjesnik, 30 (2), pp. 514 – 520.
  
  
  24. Jovanović V., Marinković D., Janošević D., Petrović N., 2023, Influential Factors in the Loading of the Axial Bearing of the Slewing Platform Drive in Hydraulic Excavators, Tehnicki Vjesnik, 30 (1), pp. 158 – 168.
  
  
  25. Mahmood T., Haleemzai I., Ali Z., Pamucar D., Marinkovic D., 2022, Power muirhead mean operators for interval-valued linear diophantine fuzzy sets and their application in decision-making strategies, Mathematics, 10 (1), 70.
  
  
  26. Macura D., Laketić M., Pamučar D., Marinković D., 2022, Risk Analysis Model with Interval Type-2 Fuzzy FMEA – Case Study of Railway Infrastructure Projects in the Republic of Serbia, Acta Polytechnica Hungarica, 19 (3), pp. 103 – 118.
  
  
  27. Babic M., Fragassa C., Marinkovic D., Povh J., 2022, Machine learning tools in the analyze of a bike sharing system, International Journal for Quality Research, 16 (2), pp. 375 – 394.
  
  
  28. Babič M., Wangyao P., Šter B., Marinković D., Fragassa C., 2022, Modelling the Surface Roughness of Steel after Laser hardening by using 2D Visibility Network, Convolutional neural Networks and Genetic Programming, FME Transactions, 50 (3), pp. 393 – 402.
  
  
  29. Madić M., Petrović G., Petković D., Antucheviciene J., Marinković D., 2022, Application of a Robust Decision-Making Rule for Comprehensive Assessment of Laser Cutting Conditions and Performance, Machines, 10 (2), 153.
  
  
  30. Babič M., Marinkovic D., Bonfanti M., Calì M., 2022, Complexity Modeling of Steel-Laser-Hardened Surface Microstructures, Applied Sciences, 12 (5), 2458.
  
  
  31. Ayub S., Shabir M., Riaz M., Mahmood W., Bozanic D., Marinkovic D., 2022, Linear Diophantine Fuzzy Rough Sets: A New Rough Set Approach with Decision Making, Symmetry, 14 (3), 525
  
  
  32. Chakraborty A., Mondal S.P., Alam S., Pamucar D., Dragan M., 2022, A New Idea to Evaluate Networking Problem and MCGDM Problem in Parametric Interval Valued Pythagorean Arena, Discrete Dynamics in Nature and Society, 2022, 7369045.
  
  
  33. Božanić D., Pamučar D., Milić A., Marinković D., Komazec N., 2022, Modification of the Logarithm Methodology of Additive Weights (LMAW) by a Triangular Fuzzy Number and Its Application in Multi-Criteria Decision Making, Axioms, 11 (3), 89.
  
  
  34. Nasir A., Jan N., Yang M.-S., Pamucar D., Marinkovic D., Khan S.U., 2022, Security Risks to Petroleum Industry: An Innovative Modeling Technique Based on Novel Concepts of Complex Bipolar Fuzzy Information, Mathematics, 10 (7), 1067.
  
  
  35. Damjanović M., Stević Ž., Stanimirović D., Tanackov I., Marinković D., 2022, Impact of the number of vehicles on traffic safety: multiphase modeling, Facta Universitatis, Series: Mechanical Engineering, 20 (1), pp. 177 – 197.
  
  
  36. Petrović G., Pavlović J., Madić M., Marinković D., 2022, Optimal Synthesis of Loader Drive Mechanisms: A Group Robust Decision-Making Rule Generation Approach, Machines, 10 (5), 329.
  
  
  37. Babič M., Marinković D., Kovačič M., Šter B., Calì M., 2022, A New Method of Quantifying the Complexity of Fractal Networks, Fractal and Fractional, 6 (6), 282.
  
  
  38. Kamacı H., Marinkovic D., Petchimuthu S., Riaz M., Ashraf S., 2022, Novel Distance-Measures-Based Extended TOPSIS Method under Linguistic Linear Diophantine Fuzzy Information, Symmetry, 14 (10), 2140.
  
  
  39. Ayub S., Shabir M., Riaz M., Karaaslan F., Marinkovic D., Vranjes D., 2022, Linear Diophantine Fuzzy Rough Sets on Paired Universes with Multi Stage Decision Analysis, Axioms, 11 (12), 686.
  
  
  40. Farid H.M.A., Kausar R., Riaz M., Marinkovic D., Stankovic M., 2022, Linear Diophantine Fuzzy Fairly Averaging Operator for Suitable Biomedical Material Selection, Axioms, 11 (12), 735.
  
  
  41. Pramanik P.K.D., Biswas S., Pal S., Marinkovic D., Choudhury P., 2021, A Comparative Analysis of Multi-Criteria Decision-Making Methods for Resource Selection in Mobile Crowd Computing, Symmetry, 13 (9), 1713.
  
  
  42. Zulqarnain, R.M., Siddique, I., Ali, R., Pamucar, D., Marinkovic, D., Bozanic, D., 2021, Robust aggregation operators for intuitionistic fuzzy hyper-soft set with their application to solve MCDM problem, Entropy, 23 (6), 688.
  
  
  43. Nedeljković M., Puška A., Doljanica S., Jovanović S.V., Brzaković P., Stević Ž., Marinkovic D., 2021, Evaluation of rapeseed varieties using novel integrated fuzzy PIPRECIA - fuzzy MABAC model, PLoS ONE, 16, e0246857.
  
  
  44. Mahmood T., Ahmmad J., Ali, Z., Pamucar D., Marinkovic D., 2021, Interval valued t-spherical fuzzy soft average aggregation operators and their applications in multiple-criteria decision making, Symmetry, 13 (5), 829.
  
  
  45. Kuchak A.J.T., Marinkovic D., Zehn M., 2021, Parametric Investigation of a Rail Damper Design Based on a Lab-Scaled Model, Journal of Vibration Engineering and Technologies, 9 (1), pp. 51-60.
  
  
  46. Mijajlović M., Puška A., Stević Ž., Marinković D., Doljanica D., Jovanović S.V., Stojanović I., Beširović J., 2020, Determining the competitiveness of spa-centers in order to achieve sustainability using a fuzzy multi-criteria decision-making model, Sustainability, 12 (20), 8584.
  
  
  47. Pamučar D., Žižović M., Marinković D., Doljanica D., Jovanović S.V., Brzaković P., 2020, Development of a multi-criteria model for sustainable reorganization of a healthcare system in an emergency situation caused by the COVID-19 pandemic, Sustainability, 12 (18), 7504.
  
  
  48. Blagojević A., Stević Ž., Marinković D., Kasalica S., Rajilić S., 2020, A novel entropy-fuzzy PIPRECIA-DEA model for safety evaluation of railway traffic, Symmetry, 12 (9), 1479.
  
  
  49. Tigh Kuchak A.J., Marinkovic D., Zehn M., 2020, Finite element model updating - Case study of a rail damper, Structural Engineering and Mechanics, 73 (1), pp. 27-35.
  
  
  50. Mijajlović M., Vidojković S., Ćirić D., Marinković D., 2020, Numerical simulation of fluid-structure interaction between fishing wobbler and water, Facta Universitatis Series Mechanical Engineering, 18 (4), pp. 665-676.
  
  
  51. Petrović G., Mihajlović J., Ćojbašić Ž., Madić M., Marinković D., 2019, Comparison of three fuzzy MCDM methods for solving the supplier selection problem, Facta Universitatis Series Mechanical Engineering, 17 (3), pp. 455-469.
  
  
  52. Mohammadkhah M., Marinkovic D., Zehn M., Checa S., 2019, A review on computer modeling of bone piezoelectricity and its application to bone adaptation and regeneration, Bone, 127, pp. 544-555.
  
  
  53. Korunović N., Fragassa C., Marinković D., Vitković N., Trajanović M., 2019, Performance evaluation of cord material models applied to structural analysis of tires, Composite Structures, 224, 111006.
  
  
  54. Korunovic N., Marinkovic D., Trajanovic M., Zehn M., Mitkovic M., Affatato S., 2019, In silico optimization of femoral fixator position and configuration by parametric CAD model, Materials, 12 (14), 2326.
  
  
  55. Marinkovic D., Zehn M., 2019, Survey of finite element method-based real-time simulations, Applied Sciences, 9 (14), 2775.
  
  
  56. Mitrev R., Marinković D., 2019, Numerical study of the hydraulic excavator overturning stability during performing lifting operations, Advances in Mechanical Engineering, 11 (5), doi: 10.1177/1687814019841779.
  
  
  57. Ha G.X., Marinkovic D., Zehn M.W., 2019, Parametric investigations of mechanical properties of nap-core sandwich composites, Composites Part B: Engineering, 161, pp. 427-438
  
  
  58. Ha G.X., Zehn M.W., Marinkovic D., Fragassa C., 2019, Dealing with nap-core sandwich composites: How to predict the effect of symmetry, Materials, 16 (6), 874.
  
  
  59. Marković D., Petrović G., Ćojbašić Ž., Marinković D., 2019, A metaheuristic approach to the waste collection vehicle routing problem with stochastic demands and travel times, Acta Polytechnica Hungarica, 16 (7), pp. 45-60.
  
  
  60. Marinković D., Rama G., Zehn M., 2019, Abaqus implementation of a corotational piezoelectric 3-node shell element with drilling degree of freedom, Facta Universitatis Series: Mechanical Engineering, 17 (2), pp. 269-283.
  
  
  61. Stojkovic M., Veselinovic M., Vitkovic N., Marinkovic D., Trajanovic M., Arsic S., Mitkovic M., 2018, Reverse modelling of human long bones using T-splines-case of tibia, Tehnicki Vjesnik, 25 (6), pp. 1753-1760.
  
  
  62. Rama G., Marinkovic D., Zehn, M., 2018, High performance 3-node shell element for linear and geometrically nonlinear analysis of composite laminates, Composites Part B: Engineering, 151, pp. 118-126.
  
  
  63. Marinkovic D., Zehn M., Rama G., 2018, Towards real-time simulation of deformable structures by means of co-rotational finite element formulation, Meccanica, 53 (11-12), pp. 3123-3136.
  
  
  64. Rama G., Marinkovic D., Zehn M., 2018, A three-node shell element based on the discrete shear gap and assumed natural deviatoric strain approaches, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (7), 356.
  
  
  65. Marinković D., Zehn M., 2018, Corotational finite element formulation for virtual-reality based surgery simulators, Physical Mesomechanics, , 21 (1), pp. 18-23.
  
  
  66. Marinković D., Zehn M., 2018, Consideration of stress stiffening and material reorientation in modal space based finite element solutions, Physical Mesomechanics, 21 (4), pp. 341-350.
  
  
  67. Rama G., Marinković D., Zehn M., 2018 , Efficient three-node finite shell element for linear and geometrically nonlinear analyses of piezoelectric laminated structures, Journal of Intelligent Material Systems and Structures, 29 (3), pp. 345-357.
  
  
  68. Marinković D., Rama G., 2017, Co-rotational shell element for numerical analysis of laminated piezoelectric composite structures, Composites Part B: Engineering, 125, pp. 144-156.
  
  
  69. Rama G., Marinković D., Zehn M., 2017, Linear shell elements for active piezoelectric laminates, Smart Structures and Systems, 20 (6), pp. 729-737.
  
  
  70. Mitrev R., Janosević D, Marinković D., 2017, Dynamical modelling of hydraulic excavator considered as a multibody system, Tehnički Vjesnik - Tehnical Gazette, 24 (Suppl. 2), pp. 327-338.
  
  
  71. Marinković D., Zehn M., Milić P., 2016 On the design of thermally loaded fiber optics feedthroughs, Thermal Science, 20 (5), pp. S1313-S1320.
  
  
  72. Milić P., Marinković D., 2015, Isogeometric FE analysis of complex thin-walled structures, Transactions of FAMENA, 39 (1), pp. 15-26.
  
  
  73. Nikolić V., Janošević D., Marinković D., 2015, Determination of the Load Acting on the Axial Bearing of a Slewing Platform Drive in Hydraulic Excavators, Acta Polytechnica Hungarica, 12 (1), pp. 5-22.
  
  
  74. Tomić V., Marinković D., Marković D., 2014, The selection of Logistic Centers location using Multi-Criteria Comparison: case study of the Balkan Peninsula, Аcta Polytechnica Hungarica, 11 (10), pp. 97-113.
  
  
  75. Radoičić G., Jovanović M., Marinković D., 2014, Non-linear incidental dynamics of frame structures, Structural Engineering and Mechanics, 52 (6), pp. 1193-1208.
  
  
  76. Nestorović T., Marinković D., S. Shabadi, 2014, User defined finite element for modeling and analysis of active piezoelectric shell structures, Meccanica, 49 (8), pp. 1763-1774.
  
  
  77. Marinković D., Zehn M., Marinković Z., 2013, The analysis of FEM results convergence in modelling piezo-electric active shell structures, Transactions of FAMENA, 37 (4), pp. 17-27.
  
  
  78. Marković D., Petrović G., Marinković D., Ćojbašić Ž., 2012, Metaheuristic maintenance optimization of refuse collection vehicles comparative analysis using Taguchi experimental design, Transactions of FAMENA, 36 (4), pp. 25-38.
  
  
  79. Marinković Z., Marinković D., Petrović G, Milić P., 2012, Modeling and simulation of dynamic behavior of electric motor driven mechanisms, Tehnički Vjesnik - Technical Gazette, 19 (4) , pp. 717-725.
  
  
  80. Marinković D., Zehn M., Marinković Z., 2012, Finite element formulations for effective computations of geometrically nonlinear deformations, Advances in Engineering Software, 50, pp. 3-11
  
  
  81. Marinković D., Marinković Z., 2012, On FEM modeling of piezoelectric actuators and sensors for thin-walled structures, Smart Structures and Systems, 9 (5), pp. 411-426.
  
  
  82. Marinković D., Nestorović T., Marinković Z., Trajkov M., 2012, Modelling and Simulation of Piezoelectric Adaptive Structures, Transactions of FAMENA, 36 (1), pp. 25-34.
  
  
  83. Nestorović T., Marinković D., Chandrashekar G., Marinković Z., Trajkov M., 2012, Implementation of a user defined piezoelectric shell element for analysis of active structures, Finite Elements in Analysis and Design, 52, pp. 11-22.
  
  
  84. Marinković D., Marinković Z., 2011, FEM and Ritz Method – A Piezoelectric Active Shell Case Study, Transactions of FAMENA, 35 (3), pp. 39-48.
  
  
  85. Petrović G., Marinković Z., Marinković D., 2011, Optimal preventive maintenance model of complex degraded systems: A real life case study, Journal of Scientific & Industrial Research, 70, pp. 412-420.
  
  
  86. Petrović G., Marinković D., Ćojbašić Ž., 2011, Optimal preventive maintenance of refuse collection vehicles using probabilistic and computational intelligence approach, Scientific Research and Essays, 16 (6), pp. 3485-3497.
  
  
  87. Marinković D., Köppe H., Gabbert U., 2009, Aspects of modeling piezoelectric active thin-walled structures, Journal of Intelligent Material Systems and Structures, 20 (15), pp. 1835-1844.
  
  
  88. Marinković D., Köppe H., Gabbert U., 2008, Degenerated shell element for geometrically nonlinear analysis of thin-walled piezoelectric active structures, Smart Materials and Structures, 17 (1), 015030.1-10.
  
  
  89. Marinković D., Köppe H., Gabbert U., 2007, Accurate modeling of the electric field within piezoelectric layers for active composite structures, Journal of Intelligent Material Systems and Structures, 18 (5), pp. 503-513.
  
  
  90. Marinković D., Köppe H., Gabbert U., 2006, Numerically efficient finite element formulation for modeling active composite laminates, Mechanics of Advanced Materials and Structures, 13 (5), pp. 379-392.
  
  
  
  

   

• Radovi u ostalim časopisima:
  
  
  1. Božanić D., Tešić D., Komazec N., Marinković D., Puška A., 2023, Interval fuzzy AHP method in risk assessment, Reports in Mechanical Engineering, 4 (1), pp. 131 – 140.
  
  
  2. Tešić D., Božanić D., Puška A., Milić A., Marinković D., 2023, Development of the MCDM fuzzy LMAW-GREY Marcos model for selection of a dump truck, Reports in Mechanical Engineering, 4 (1), pp. 1 – 17.
  
  
  3. Pamučar D., Božanić D., Puška A., Marinković D., 2022, Application of neuro-fuzzy system for predicting the success of a company in public procurement, Decision Making: Applications in Management and Engineering, 5 (1), pp. 135 – 153.
  
  
  4. Sljivic M., Wagner S., Pavlovic A., Marinkovic D., 2022, Metal Additive Manufacturing of End-Use Components and Parts: A Practical Overview, Structural Integrity, 25, pp. 149 - 160
  
  
  5. Strzalka C., Zehn M., Marinkovic D., 2022, Mode Superposition Techniques for a Priori High Stress Detection and Fatigue Hotspot Identification, Structural Integrity, 25, pp. 247 - 257
  
  
  6. Radovic N., Marinkovic D., Miloradovic N., 2022, Rotating Bending Fatigue of Spheroidal Cast Irons, Structural Integrity, 25, pp. 29 - 35
  
  
  7. Babic M., Varga G., Ghiculescu D., Jakubowicz M., Slavov S., Seritan G., Marinkovic D., 2021, A novel approach for pattern recognition by using graph theory and its application in mechanical engineering, Academic Journal of Manufacturing Engineering, 19 (3), pp. 5-10.
  
  
  8. Bozanic D., Tešić D., Marinković D., Milić A., 2021 , Modeling of neuro-fuzzy system as a support in decision-making processes , Reports in Mechanical Engineering, 2 (1), pp. 222-234.
  
  
  9. Strzalka C., Marinkovic D., Zehn M.W., 2021, Stress Mode Superposition for a Priori Detection of Highly Stressed Areas: Mode Normalisation and Loading Influence, Journal of Applied and Computational Mechanics, 7 (3), pp. 1698-1709.
  
  
  10. Žižovic M., Miljkovic B., Marinkovic D., 2020, Objective methods for determining criteria weight coefficients:a modificationof the critic method, Decision Making: Applications in Management and Engineering, 3 (2), pp. 149-161.
  
  
  11. Babič M., Fragassa C., Lesiuk G., Marinković D., 2020, A new method for complexity determination by using fractals and its applications in material surface characteristics, International Journal for Quality Research, 14 (3), pp. 705-716.
  
  
  12. Marinković D., Zehn, M. Pavlović A., 2020, Highly efficient fe simulations by means of simplified corotational formulation, Operational Research in Engineering Sciences: Theory and Applications, 3 (2), pp. 74-86.
  
  
  13. Fragassa C., Lucisano G., Marinkovic D., Campana G., 2019, A practical guideline in the design and use of woodworking tools, FME Transactions, 47, pp. 487-495.
  
  
  14. Rama G., Marinkovic D., Zehn M., 2016, Piezoelectric Co-Rotational 3-node shell element, American Journal of Engineering and Applied Sciences, 9 (4), pp. 902-912.
  
  
  15. Nguyen V.A., Zehn M., Marinković D., 2016, An efficient co-rotational FEM formulation using a projector matrix, Facta Universitatis Series Mechanical Engineering, 14 (2), pp. 227 – 240.
  
  
  16. Rama G., Marinkovic D., Zehn M., 2016, Efficient co-rotational 3-node shell element, American Journal of Engineering and Applied Sciences, 9 (2), pp. 420-431
  
  
  17. Petrescu F.I.T., Calautit J.K., Marinkovic D., 2015, Structural dynamics of the distribution mechanism with rocking tappet with roll, American Journal of Engineering and Applied Sciences, 8 (4), pp. 589-601.
  
  
  18. Marinković D., Zehn M., Marinković Z., 2012, A FEM-Formulation for Virtual Reality Applications, Strojarstvo, 54 (3), 2012, pp. 179-187.
  
  
  19. Marinković D., Gabbert U., Köppe H., 2005, Linear and nonlinear analysis of active composite laminates, PAMM, 5, pp. 111-112.
  
  
  20. Marinković Z., Marković S., Marinković D., 2000, Linearization and solving of differential motion equations of crane driving mechanisms, Facta Universitatis, Series Mechanical Engineering, 7 (1), pp. 879-886.
  
  
  21. Marinković Z., Marković S., Marinković D., Petrović G., Milić P., 2003, The influence of non-linear excitations of asynchronous electric motors on the work of driving mechanisms of cranes, Facta Universitatis, Series Mechanics, Automatic Control and Robotics, 3 (15), pp. 1139-1146.
  
  
  22. Marinković D., Gabbert U., 2004, Modeling of laminate composites with embedded piezoelectric actuators and sensors, Facta Universitatis, Series Mechanics, Automatic Control and Robotics, 4 (16),  pp. 115-120.
  
  
  23. Marinković D., Köppe H., Gabbert U., 2004, Finite element development for generally shaped piezoelectric active laminates, part I – linear approach, Facta Universitatis, Series Mechanical Engineering, 10 (1), pp. 11-24.
  
  
  24. Marinković D., Köppe H., Gabbert U., 2005, Finite element development for generally shaped piezoelectric active laminates, part II – geometrically nonlinear approach, Facta Universitatis, Series Mechanical Engineering, 11 (1),  pp. 1-16.
  
  
  25. Marinković D., Jöchen K., 2008, Cost-effective geometrically nonlinear FE-formulation for soft tissues' deformation, Facta Universitatis, Series Mechanical Engineering, 6 (1), 2008, pp. 1-12.
  
  
  26. Marinković D., Marinković Z., Petrović G., 2011, Mass-spring Systems for Geometrically Nonlinear Dyinamic Analysis, MACHINE DESIGN, (Ed.) Kuzmnović S., University of Novi Sad – Faculty of Technical Sciences, ADEKO, Novi Sad, 3, pp. 163-166.
  
  
  27. Marinković D., Zehn M., Marinković Z., 2011, An Approach to Contact Detection in VR-Simulations, Facta Universitatis, Series Mechanical Engineering, 9 (1), pp. 1-8.
  
  
  28. Marinković D., Marinković Z., Petrović G., 2012, On efficiency of a single-layer shell element for composite laminated structures, Facta Universitatis, Series Mechanical Engineering, 10 (2), pp. 115-122.
  
  
  29. Marinković D., Marinković, Z, Milić, P., 2013, Combined linear – geometrically nonlinear FEM modeling for highly efficient dynamical simulations, Facta Universitatis, series Automatic Control and Robotics, 12 (1), pp. 9-18.
  
  
  30. Nestorović T., Shabadil S., Marinković D., Trajkov, M., 2013, Modeling of piezoelectric smart structures by implementation of a user defined shell finite element, Facta Universitatis,  series Mechanical Engineering, 11 (1), pp. 1-12.
  
  
  31. Milić, P., Marinković D., 2013, Isogeometric structural analysis based on NURBS shape functions, Facta Universitatis,  series Mechanical Engineering, 11 (2), pp. 193-202.
  
  
  32. Marinković D., Marinković Z., 2010, Design, Simulation and Test of Mobile Heavy-Duty Structures, MACHINE DESIGN - monograph, (Ed.) Kuzmnović S., University of Novi Sad – Faculty of Technical Sciences, ADEKO, Novi Sad, pp. 59-64.
  
  
• Radovi na naučnim skupovima međunarodnog značaja:

  Marinković Z., Vulić A., Marinković D.: “Electro-mechanical drives of butterfly valves”, međunarodna konferencija POWER TRANSMISSIONS ‘03, Varna, 2003, Proceedings Sections III “Experimental investigations and applications” and CD, Balkan Association of Power Transmissions, Sofia, 2003, pp. 70-75.

  
  

  Korchevskaya E., Mikhasev G., Marinković D., Gabbert U.: “Buckling and vibrations of composite laminated cylindrical shells undr axial load”, 6^th Magdeburg Days of Mechanical Engineering, Otto-von Guericke University Magdeburg, 2004, Proceedings, pp. 183-189.

  
  

  Mikhasev G., Korchevskaya E., Gabbert U., Marinković D.: “Local buckling, stationary and non-stationary vibrations of the composite laminated shells having the weakest spots”, Fourth International Conference on Thin-Walled Structures ICTWS, Proceedings, London, 2004., pp. 769-776.

  
  

  Marinković D., Gabbert U.: “Shell finite element development for piezoelectric active composite laminates”, 2. ForschungsForum FOMEKK, Proceedings, Stuttgart, 2004.

  
  

  Marinković Z., Milić P., Marinković D., Petrović G, Marković S.: “Modeling and simulation of the work of transport machines driving mechanisms with frequency modulated electromotor drive”, The Fifth International Conference HEAVY MACHINERY HM 2005, Mataruška Banja 2005, Proceedings, Faculty of Mechanical Engineering Kraljevo, 2005., pp. I A.73-I A.76.

  
  

  Marinković D., Köppe H., Gabbert U.: “Modeling and simulation of active composite laminates”, 7^th Magdeburg Days of Mechanical Engineering, Magdeburg, october 2005, Proceedings, Editors - Kasper, Roland et al., 2005., pp. 306-313.

  
  

  Marinković Z., Vulić A., Marinković D., Petrović G., Marković S., Milić P: “Analysis of modeling and simulation of the work of electromotor drives”, The 2^nd International Conference POWER TRANSMISSIONS ‘06, Novi Sad, Proceedings, Balkan Association of Power Transmissions, Faculty of tehnical Sciences Novi Sad, 2006, pp. 441-448.

  
  

  Petrović G., Marinković Z., Marinković D.: “Modeling and simulation of the operation of the excavator’s bucket wheel driving mechanism”, XVIII International Conference on MATERIAL HANDLING, CONSTRUCTIONS AND LOGISTICS, MHCL’06, Belgrade, Proceedings, Mechanical Engineering Faculty University of Belgrade, Belgrade, 2006, pp. 139-144.

  
  

  Marinković D., Köppe H., Gabbert U.: “Development of a smart finite element and its numerical verification”, First South-East European Conference on Computational Mechanics, SEECCM-06, Kragujevac, June 2006, Proceedings, Editors – M. Kojić and M Papadrakakis, 2006., pp. 236-242.

  
  

  Gabbert U., Köppe H., Lefevre J., Marinković D., Nestorović T.: “Overall computation design of smart composite lightweight structures for vibration and noise control”, 7th World Congress on Computation Mechanics, Los Angeles, California, June 2006, Proceedings-CD, 2006.

  
  

  Marinković D., Köppe H., Gabbert U.: “Geometrically nonlinear analysis of piezoelectric laminated shell structures”, Advanced Numerical Analysis of Shell-like Structures (ANASS), Zagreb, Croatia, September 2007, Proceedings, Editors – J. Soric, F. Gruttmann and W. Wagner, 2007., pp. 203-210.

  
  

  Marinković D., Köppe H., Gabbert U.: “Virtual design and simulation of advanced lightweight structures”, 8^th Magdeburg Days of Mechanical Engineering & 7^th MAHREG innovation forum, Magdeburg, October 2007, Proceedings, Editors - Kasper, Roland et al., 2007., pp. 138-144.

  
  

  Marinković D., Köppe H., Gabbert U.: “Finite element modeling of thin-walled piezoelectric active structures”, Design Modeling and Experiments of Adaptive Structures and Smart Systems (DeMEASS) II, Bad Herrenalb, October 2007.

  
  

  Marinković D., Köppe H., Gabbert U.: “Modal decomposition for transient analysis of active structures”, 9^th International Conference on Systems Automatic Control and Measurements, SAUM, Niš, November 2007., pp. 190-194.

  
  

  Ilić V., Marinković Z., Marinković D.: “Essential Development of Forklift Truck Families“,  The 5^th International Symposium About Design in Mechanical Engineering, KOD 2008, Novi Sad, 2008, Proceedings  University Novi Sad Faculty of Technical Scienes, ADEKO, Novi Sad, 2008, pp. 203-208.                                            

  
  

  Marinković Z., Marković D., Marinković D.: “Planning, Modeling, Simulation and Analysis of Storage Processes ”, The Sixth Triennial  International Conference HEAVY MACHINERY HM 2008, Mataruška Banja 2008., Proceedings, Faculty of Mechanical Engineering Kraljevo, 2008., pp. B77-B.82.

  
  

  Marinković D., Zehn M.: ”Aspects of mesh distortion and locking phenomena in FE modeling of thin-walled piezoelectric active structures”, Joint 8th World Congress on Computational Mechanics and 5th European Congress on Computational Methods in Applied Sciencies and Engineering (WCCM8/ECCOMAS 2008), Proceedings of Abstracts, Venice, Italy, 2008.

  
  

  Zehn M., Marinković D., Löwis P.: ”Experimental and analytical modal analysis of carbon fibre reinforced composite structures”, International Conference on Noise and Vibration Engineering, ISMA 2008, Proceedings-CD, Leuven, Belgium, 2008.

  
  

  Marinković D., Zehn M.: ”FE-formulations for real-time simulation of large deformations”, NAFEMS World Congress 2009, NAFEMS WC09, Proceedings-CD, Crete, 2009.

  
  

  Marinković D., Marinković Z., Petrović G.: “Advances in FEM-formulations for effective computation of geometrically nonlinear deformations”, The International Conference Mechanical Engineering in XXI Century, MASING 2010, Niš, Proceedings, University of Niš, Faculty of Mechanical Engineering, Niš, 2010., pp. 273-276.  

  
  

  Marinković Z., Marinković D., Marković D., Milić P., Tomić V.: “Variant storage design”, The International Conference Mechanical Engineering in XXI Century, MASING 2010, Niš, Proceedings, Mechanical Engineering Faculty University of Niš, Niš, 2010., pp. 285-288.

  
  

  Marinković D., Zehn M.: ”FE-formulations for fast computation of large and moderately large deformations”, The 10^th International Conference on Computational Structures Technology (CST2010), Valencia, Spain, Proceedings-CD, 2010.

  
  

  Marinković D., Zehn M.: ”Geometric stiffness matrix in modal space for multibody analysis of flexible bodies with moderate deformations”, International Conference on Noise and Vibration Engineering, ISMA 2010, Proceedings-CD, Leuven, Belgium, 2010.

  
  

  Marinković D., Zehn M.: “FEM in virtual reality concept”, 34th International Conference on Production Engineering, Niš, University of Niš, Faculty of Mechanical Engineering, 2011, pp. 201-204.

  
  

  Marinković D., Zehn M.: “Implementation of geometrically nonlinear FEM-formulations in MBS software package ADAMS”, The 7^TH International Conference Research and Development of Mechanical Elements and Systems, IRMES 2011, Zlatibor, University of Niš, Faculty of Mechanical Engineering, 2011., pp. 63-68.         

  
  

  Kämpf T., Marinković D., Zehn M.,: “Neue Wege zur Schadensidentifikation an Bauteilen aus Faserverbundwerkstoffen”, The 7^TH International Conference Research and Development of Mechanical Elements and Systems, IRMES 2011, Zlatibor, University of Niš, Faculty of Mechanical Engineering, 2011., pp. 305-310.

  
  

  Marinković D., Zehn M...: “Geometrical Nonlinearities in Elastic Body Behaviour for Multi-Body System Dynamics”, NAFEMS World Congress 2011, Boston, CD.

  
  

  Marinković Z., Marinković D., Tomić V., Marković G.: “Concept solution of logistic center in the free zone Pirot”, XX International conference on “Material Handling, Constructions and Logistics” MHCL 2012, Proceedings, Mechanical Engineering Faculty University of Belgrade, Beograd, 2012, pp. 227-230.

  
  

  Marinković Z., Marinković D., Tomić V.: “Container terminal development case of free zone Pirot”, XV Scientific conference on Railways RAILCON 2012, Proceedings, University of Niš, Faculty of Mechanical Engineering, Niš, 2012, pp. 249-252.

  
  

  Marinković D., Zehn M.: “An Overview of Highly Efficient Interactive FEM Models of Deformable Structures with Geometrical Nonlinearities Included”, XI International Conference on System, Automatic Control and Measurements, SAUM  2012, Proceedings, University of Niš, Faculty of Electronic Engineering, Faculty of Mechanical Engineering, Niš, 2012, pp. 252-259.

  
  

  Jovanović M., Radoičić G., Marinković D.: “Post-Fracture Dynamic Simulation of Responsible Supporting Structure”, XI International Conference on System, Automatic Control and Measurements, SAUM  2012, Proceedings, University of Niš, Faculty of Electronic Engineering, Faculty of Mechanical Engineering, Niš, 2012, pp. 270-273.

  
  

  Marinković D., Milić P., Marinković Z.: “The Idea of Combined Linear – Geometrically Nonlinear FEM Modeling with Application on a Tower Crane”, XI International Conference on System, Automatic Control and Measurements, SAUM  2012, Proceedings, University of Niš, Faculty of Electronic Engineering, Faculty of Mechanical Engineering, Niš, 2012, pp. 282-285.

  
  

  Marinković D., Zehn M., Marinkovic Z.: “Modal-Space Based Solutions including Geometric Nonlinearities for Flexible Multi-Body Systems”, in B.H.V. Topping, (Editor), "Proceedings of the Eighth International Conference on Engineering Computational Technology", Civil-Comp Press, Stirlingshire, UK, Paper 84, 2012. doi:10.4203/ccp.100.84.

  
  

  Marinković D., Zehn M.: “Efficient MBS-FEM integration for structural dynamics”, World Congress on Advances in Civil, Environmental, and Materials Research (ACEM’12), Seoul, 2012., pp 323-332.

  
  

  Marinković D., Zehn M.: “Co-rotational FEM for fast geometrically nonlinear static and dynamic algorithms“, Proceedings of the Fifth International Conference on  Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 2013, pp. 457-462

  
  

  Marinković D., Zehn M.: “The aspect of mesh distortion in FEM modelling of coupled electro-mechanical field“, CD-Proceedings of the NAFEMS World Congress, NWC2013, Salzburg, Salzburg, Austria, 2013, paper 338

  
  

  Marinković D., Zehn M.: “FEM formulations for surgery simulators“, Proceedings of the European NAFEMS Conference: Coupled MBS-FE Applications: A New Trend in Simulation, Frankfurt, Germany, 2013, pp. 51-53

  
  

  Zehn M., Marinković D.: “Higher, Farther, Faster – Consequences for Structures of Truck-mounted Concrete Boom“, Proceedings of the The Second International Conference Mechanical Engineering in XXI Century, MASING, Niš, Serbia, 2013, pp. 9-14

  
  

  Milić P., Marinković D.: “Structural Analysis Using Isogeometric FEM Based on NURBS Functions“, Proceedings of the The Second International Conference Mechanical Engineering in XXI Century, MASING, Niš, Serbia, 2013, pp. 343-346

• Radovi na domaćim naučnim skupovima:

  Jovanović M., Mijajlović D., Marinković D.: “Veliku numerički sistemi u inženjerskoj praksi”, YUINFO 2000, Kopaonik, Zbornik radova - CD, 2000.

  
  

  Marinković Z., Jovanović M., Marinković D.: “Oblikovanje familije lakih hidrauličkih dizalica”, Prvi skup o konstruisanju, oblikovanju i dizajnu KOD-2000 Novi Sad, Zbornik radova, Fakultet tehničkih nauka Novi Sad, Novi Sad, 2000., str. 89-94.

  
  

  Jovanović M., Marinković Z., Marinković D.: “Parametarsko modeliranje – MCAE concept familije proizvoda”, IRMES-2000, Kotor 2000, Zbornik radova, Mašinski fakultet - Podgorica Univerzitet Crne Gore, 2000., str. 145-150.

  
  

  Marinković Z., Radovanović B., Marinković D.: “Hidraulički system kod pokretniih podova”, 27. naučno-stručni skup HIPNEF 2000, Beograd, Zbornik radova, SMEITS, Beograd, 2000, str. 51-55.

  
  

  Marković S., Marinković D.: “Primena fuzzy logike kod portalnog obrtnih dizalica”, 27. naučno-stručni skup HIPNEF 2000, Zbornik radova, Savez mašinskih i elektro-tehničkih inženjera i tehničara Srbije (SMEITS), Beograd, 2000., str. 112-116.

  
  

  Vulić A., Marinković Z., Marinković D.: “Razvoj familije planetarnih reduktora mehanizama za kretanje dizalica”, 8. SEVER-ov simpozijum o mehaničkim prenosnicima snage, Subotica 2001, Zbornik radova, Sever Prenosnici ad, Subotica, 2001., str. 83-88.

  
  

  Jovanović M., Marinković Z., Marinković D.: “Simulacija havarijskih situacija regalnih dizalica”, Savetovanje sa međunarodnim učešćem Upravljanje rizikom i osiguranje u industriji, transportu i skladištenju, Beograd, DUNAV PREVING, Beograd, 2001, str. 298-302.

  
  

  Marinković Z., Jovanović M., Mijajlović D., Marinković D.: “Oblikovanje i proračun noseće konstrukcije i obrtnih čepova kod spredera”, Drugi skup o konstruisanju, oblikovanju i dizajnu, KOD-2002 Novi Kneževac, Zbornik radova, Fakultet tehničkih nauka Novi Sad, Novi Sad, 2002, str. 65-72.

  
  

  Marinković D., Jovanović M.: “Redizajn – optimalna geometrija nosača”, Drugi skup o konstruisanju, oblikovanju i dizajnu, KOD-2002 Novi Kneževac, Zbornik radova, Fakultet tehničkih nauka Novi Sad, Novi Sad, 2002, str. 53-60.

  
  

  Marinković Z., Marković S., Miltenović Đ., Marinković D.: “Simulacija procesa opterećenja i naprezanja vratila mehanizama mašina na elektro-motorni pogon”, Naučno-stručni skup Jahorina-IRMES 2002, Jahorina 2002, Zbornik radova 1/2, JUDEK-a i Univerzitet u Srpskom Sarajevu – Mašinski fakultet, Srpsko Sarajevo, 2002, str. 153-158.

  
  

  Marinković Z., Jovanović M., Perić Lj., Marinković D., Milić P.: “Razvoj familije ventila MIN-AGH za velike cevne sisteme”, 28. naučno-stručni skup sa međunarodnim učešćem HIPNEF 2002, Vrnjačka Banja, Zbornik radova, Mašinski fakultet Univerziteta u Nišu i SMEITS, Niš, 2002, str. 89-94.

  
  

  Marinković Z., Marinković D., Petrović G.: “Proračun radnog veka elemenata za spektre radnih napona sa dvoparametarskom raspodelom”, naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema IRMES ‘04, Kragujevac 2004., Zbornik radova, JUDEK-a i Mašinski fakultet u Kragujevcu, Kragujevac, 2004, str. 257-262.

  
  

  Marinković Z., Milić P., Marinković D., Petrović G.: “Modeliranje visokoregalnog skladišta i radnih ciklusa regalne dizalice”, Drugi srpski seminar sa međunarodnim učešćem TIL 2006, Niš, 2006, Mašinski fakultet Univerziteta u Nišu, Niš, 2006, str. 139-144.

  
  

  Marinković Z., Vulić A., Petrović G., Marinković D., Milić P: “Analitičko određivanje opterećenja elemenata pogonskih mehanizama mašina”, Naučno-stručni skup IRMES ’06 – Istraživanje i razvoj mašinskih elemenata i sistema, Mrakovica 2006, Zbornik radova, ADEK-o i Univerzitet u Banja Luci Mašinski fakultet, Banja Luka, 2006, str. 249-254.

  
  

  Marinković Z., Marković D., Marinković D., Milić P.: “Modeliranje i simulacija rada visokoregalnih skladišta”, Treći srpski simpozijum sa međunarodnim učešćem TIL 2008, Niš, 2008, Zbornik radova, Mašinski fakultet Univerziteta u Nišu, Niš, 2008., str. 4.1-4.8.

  
  

  Marinković Z., Petrović G., Marinković D., Marković S.: “Logistika pretovara kontejnera na terminalima”, XIII naučno-stručna konferencija o železnici, Želkon ‘08, Niš 2008., Zbornik radova, Mašinski fakultet Univerziteta u Nišu, Niš, 2008. str. 129-132

  
  

  Marinković Z., Marinković D., Marković D., Klipa I.: “Savremeni koncepti kontejnerskih terminala”, XIV naučno-stručna konferencija o železnici, Želkon ‘10, Niš 2010., Zbornik radova, Mašinski fakultet Univerziteta u Nišu, Niš, 2010. str. 337-340.

  
  

  Marinković Z.,  Marinković D., Tomić V., Marković G.: ”Značaj osnivanja logističkog (kargo) centra u Nišu i njegov uticaj za privredni razvoj regiona”, Četvrti simpozijum sa međunarodnim učešćem Transport i  logistika, TIL 2011., Mašinski fakultet Univerziteta u Nišu, Niš, 2011., str. 31-38.

  
  

  Petrović G., Ćojbašić Ž., Marinković D., Marinković Z., Marković D.: ”Višekriterijumska optimizacija procesa održavanja primenom naprednih evolutivnih metoda”, Četvrti simpozijum sa međunarodnim učešćem Transport i  logistika, TIL 2011., Mašinski fakultet Univerziteta u Nišu, Niš, 2011., str. 75-78.