Dodatne informacije

• Lični podaci

• Datum rođenja: 24.12.1954.
• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Mašinski fakultet u Nišu
• Odsek / Grupa / Smer: Proizvodno mašinstvo
• Godina diplomiranja: 1978.

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  1. M. Trajanović, N. Grujović, J. Milovanović, B. Milivojević, Računarski podržane brze proizvodne tehnologije, monografija, Mašinski fakultet u Kragujevcu, 2008.

  
  

  2. Jelena Milovanovic, Milos Stojkovic and Miroslav Trajanovic, Metal Laser Sintering for Rapid Tooling in Application to Tyre Tread Pattern Mould, Chapter in "Sintering - Methods and Products", Editor Volodymyr Shatokha, InTech, March, 2012, pp 73-90, http://www.intechopen.com/books/sintering-methods-and-products

  
  

  3. Trifunovic, M., Stojkovic, M., Trajanovic, M., & Manic, M. (2015). Semantic interpretation of geometric and technological features. In F. Cus, V. Gecevska, & F. Chiampo (Eds.), Methods and techniques for industrial development, Scientific Monograph, Chapter 11, pp. 145-165. Maribor, Slovenia: University of Maribor, Faculty of Mechanical Engineering. ISBN: 978-961-248-493-4 (M14)

  
  

  4. Zivic, F., Affatato, S., Trajanovic, M., Schnabelrauch, M., Grujovic, N., Choy, K.L. (Eds.), Biomaterials in Clinical Practice, Advances in Clinical Research and Medical Devices, eBook ISBN 978-3-319-68025-5, DOI 10.1007/978-3-319-68025-5, Hardcover ISBN 978-3-319-68024-8, Number of Pages XV, 830, Springer International Publishing, 2018

• Knjige i udžbenici:

  1. D.Domazet, M.Trajanović, M.Manić, Uvod u računarski  integrisane poizvodne sisteme, Naučna knjiga, Beograd, 1989

  
  

  2. Nikola Korunović, Miroslav Trajanović, Modeliranje za analizu metodom konačnih elemenata, Univerzitet u Nišu, Mašinski fakultet, 2020.

• Radovi u časopisima sa IMPACT faktorom:

  1.      Gordana M. Stefanović, Miroslav D. Trajanović, Neven Duić, Martina M. Ferk, Pollution data tracking in the Western Balkan countries: a state-of –the –art review, Thermal Science,  Year 2008, Vol. 12, Issue 4, Pages 105 - 112, (M23,IF=0,407)

  
  

  2.      Zdravković M., Trajanović M., Integrated Product Ontologies for Inter-Organizational Networks, Computer Science and Information Systems (ComSIS), Volume 6, Number 2, December 2009., pp 29 – 46, UDC 004.72, DOI: 10.2298/csis0902029Z, (M23, IF=0,324)

  
  

  3.      Milovanovic, M. Stojkovic, M. Trajanovic, “Rapid Tooling of Tyre Tread Ring Mould Using Direct Metal Laser Sintering”, JSIR-Journal of Scientific Industrial Research, Vol.68(12), December 2009, pp 1038-1042, http://nopr.niscair.res.in/handle/123456789/6736, ISSN: 0975-1084 (Online), ISSN: 0022-4456. , (M23=0,359)

  
  

  4.      Mišić D., Domazet D., Trajanović M, Manić M., Zdravković M., Concept of the exception handling system for manufacturing business processes, Computer Science and Information Systems (ComSIS), 2010, 7(3):489-509, DOI:10.2298/CSIS090608006M, ISSN: 1820-0214, (M23,IF=0,324)

  
  

  5.      Mišić D., Stojkovic M., Domazet D., Trajanović M, Manić M., Trifunovic M., Exception detection in business process management systems, JSIR-Journal of Scientific Industrial Research, Vol.69(03), March 2010, pp 1038-1042, http://nopr.niscair.res.in/handle/123456789/7377, ISSN: 0975-1084 (Online); ISSN: 0022-4456 (Print), (M23, IF=0,514)

  
  

  6.      Milos Stojkovic,  Jelena Milovanovic,  Nikola Vitkovic,  Miroslav Trajanovic,  Nenad Grujovic, Vladimir Milivojevic, Slobodan Milisavljevic, Stanko Mrvic, Reverse modeling and solid free-form fabrication of sternum implant, Australasian Physical & Engineering Sciences in Medicine: Volume 33, Issue 3 (2010), Page 243-250, DOI: 10.1007/s13246-010-0029-1, (M23, IF=0,466)

  
  

  7.      Milan Zdravković, Hervé Panetto, Miroslav Trajanović, Alexis Aubry, An Approach for Formalizing the Supply Chain Operations, Enterprise Information System, Volume 5, Issue 4, Taylor & Francis Group, 2011, Page 401-421, DOI:10.1080/17517575.2011.593104, (M21, IF=3,684)

  
  

  8.      Nikola Korunović, Miroslav Trajanović, Miloš Stojković, Dragan Mišić, Jelena Milovanović, Finite Element Analysis of a Tire Steady Rolling on the Drum and Comparison with Experiment, Strojniški vestnik - Journal of Mechanical Engineering, 57(2011)12, 888-897, DOI: 10.5545/sv-jme.2011.124, (M23, IF=0,398)

  
  

  9.      Milos Stojkovic, Jelena Milovanovic, Nikola Vitkovic, Miroslav Trajanovic, Stojanka Arsic, Milorad Mitkovic, Analysis of femoral trochanters morphology based on geometrical model, JSIR-Journal of Scientific Industrial Research, Vol.71(03), March 2012, pp 210-216, http://nopr.niscair.res.in/handle/123456789/13621, ISSN: 0975-1084 (Online); ISSN: 0022-4456 (Print) (M23, IF=0,505)

  
  

  10.  Sasa Randjelovic, Miodrag Manic, Miroslav Trajanovic, Mladomir Milutinovic, Dejan Movrin, The impact of die angle on tool loading in the process of cold extruding steel, Materials and technology, 46 (2012) 2, pp 149–154, ISSN: 1580-2949 (M23, IF= 0,571)

  
  

  11.  Vitković,N., J. Milovanović, M.Trajanović, M.Stojković, N.Korunović, M. Manić, Different Approaches for the Creation of Femur Anatomical Axis and Femur Shaft Geometrical Models, Strojarstvo: časopis za teoriju i praksu u strojarstvu, Vol. 54, No 3, pp 247-255, 2012. (M23)

  
  

  12.  Nikola Korunović, Miroslav Trajanović , Miloš Stojković, Nikola Vitković, Milan Trifunović, Jelena Milovanović, Detailed vs. Simplified Tread Tire Model for Steady-State Rolling Analysis, Strojarstvo: časopis za teoriju i praksu u strojarstvu, Vol. 54, No 2, pp 153-160, 2012. (M23)

  
  

  13.  Milan Zdravković, Miroslav Trajanović, Miloš Stojković, Dragan Mišić, Nikola Vitković, A case of using the Semantic Interoperability Framework for custom orthopedic implants manufacturing, Annual Reviews in Control, Volume: 36   Issue: 2   Pages: 318-326   DOI: 10.1016/j.arcontrol.2012.09.013   Published: DEC 2012 (M21, IF=1,289)

  
  

  14.  Vidosav Majstorovic, Miroslav Trajanovic, Nikola Vitkovic, Milos Stojkovic, Reverse engineering of human bones by using method of anatomical features, CIRP Annals - Manufacturing Technology 62 (2013) 167–170 (M21, IF 2,251) 

  
  

  15.  Vitković, N., Milovanović, J., Korunović, N., Trajanović, M., Stojković, M., Mišić, D., Arsić, S., Software System for Creation of Human Femur Customized Polygonal Models, Computer Science and Information Systems, Vol. 10, No. 3, 1473-1497. (2013) (M23, IF=0,625)

  
  

  16.   V.J. Cvetkovic, S.J. Najman, J.S. Rajkovic, A.Lj. Zabar, P.J. Vasiljevic, Lj.B. Djordjevic, M.D. Trajanovic,  A comparison of the microarchitecture of lower limb long bones between some animal models and humans: a review,  Veterinarni Medicina, 58, 2013 (7): 339–351 (M23, IF=0,679)

  
  

  17.  Saša Milenkovic, Milorad Mitkovic, Ivan Micic, Desimir Mladenovic, Stevo Najman, Miroslav Trajanovic, Miodrag Manic, Milan Mitkovic, Distal tibial pilon fractures (AO/OTA type B, and C) treated with the external skeletal and minimal internal fixation method, Vojnosanitetski Pregled 2013; 70(9): 836–841 (M23, IF=0,21)

  
  

  18. Milan Zdravković, Herve Panetto, Miroslav Trajanović, Alexis Aubry, Explication and semantic querying of enterprise information systems, Knowledge and Information Systems, Volume 40, Issue 3 (2014), Page 697-724, DOI: 10.1007/s10115-013-0650-x (M21, IF=2,639)

  
  

  19. Madić Miloš, Radovanović Miroslav, Manić Miodrag, Trajanović Miroslav, Optimization of ANN models using different optimization methods for improving CO2 laser cut quality characteristics, Journal of the Brazilian Society of Mechanical Science and Engineering, January 2014, Volume 36, Issue 1, pp 91-99 (M23, IF=0,385)

  
  

  20. Žarko J. Mitić, Stevo J. Najman, Milorad D. Cakić, Zorica R. Ajduković, Nenad L. Ignjatović, Ružica S. Nikolić, Goran M. Nikolić, Sanja T. Stojanović, Marija Đ. Vukelić, Miroslav D. Trajanović, Spectroscopic characterization of bone tissue of experimental animals after glucocorticoid treatment and recovery period, Journal of Molecular Structure, Volume 1074, 25 September 2014, Pages 315-320, DOI: 10.1016/j.molstruc.2014.06.006 (M23, IF=1,404)

  
  

  21. Milan Trifunovic, Milos Stojkovic, Miroslav Trajanovic, Miodrag Manic, Dragan Misic and Nikola Vitkovic, Analysis of semantic features in free-form objects reconstruction, Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Volume 30, Issue 1, 2 December 2014, Pages 44-63, DOI: 10.1017/S0890060415000153 (M22, IF=0,604)

  
  

  22. Nikola Vitković, Jelena Mitić, Miodrag Manić, Miroslav Trajanović, Karim Husain, Slađana Petrović, and Stojanka Arsić, The Parametric Model of the Human Mandible Coronoid Process Created by Method of Anatomical Features, Computational and Mathematical Methods in Medicine, vol. 2015, Article ID 574132, 10 pages, 2015. doi:10.1155/2015/574132 (M23, IF=1.018)

  
  

  23. Tufegdzic Milica, Arsic Stojanka, Trajanovic Miroslav, Parameter-based morphometry of the wing of ilium, Journal of the Anatomical Society of India , Volume 64, Issue 2, December 2015, Pages 129 - 135, doi: 10.1016/j.jasi.2015.10.008 (M23, IF=0,146)

  
  

  24. Milan Trifunovic, Milos Stojkovic, Dragan Misic, Miroslav Trajanovic, Miodrag Manic, Recognizing Topological Analogy in Semantic Network, International Journal on Artificial Intelligence Tools, Vol. 24, No. 3 (2015) 1550006 (25 pages), World Scientific Publishing Company, DOI: 10.1142/S0218213015500062 (M23, IF=0,478)

  
  

  25. Milan Zdravković, Ovidiu Noran, Hervé Panetto and Miroslav Trajanović, Enabling Interoperability as a Property of Ubiquitous Systems for Disaster Management, Computer Science and Information Systems, Volume 12, Issue 3, August 2015, DOI: 10.2298/CSIS141031011Z (M23, IF=0,447)

  
  

  26. Dijana Takić Miladinov, Simonida Tomić, Sanja Stojanović, Jelena Najdanović, Jovanka Filipović, Miroslav Trajanović, Stevo Najman, Synthesis, Swelling Properties and Evaluation of Genotoxicity of Hydrogels Based on (Meth)acrylates and Itaconic Acid, Materials Research, vol.19 no.5, pp 1070-1079, São Carlos, Sept./Oct. 2016 DOI: http://dx.doi.org/10.1590/1980-5373-MR-2016-0222 (M23, IF=0,873)

  
  

  27. Milica Tufegdzic, Stojanka Arsic, Miroslav Trajanovic, Predictive geometrical model of the upper extremity of human fibula, Biocybernetics and Biomedical Engineering, Biocybernetics and biomedical engineering, (2016), vol. 36 br. 1, str. 172-181, (M23, IF=0,808)

  
  

  28. Žarko Mitić, Aleksandra Stolić, Sanja Stojanović, Stevo Najman, Nenad Ignjatović, Goran Nikolić, Miroslav Trajanović, Instrumental methods and techniques for structural and physicochemical characterization of biomaterials and bone tissue: A review, Materials Science and Engineering. C: Materials for Biological Applications, Volume 79, 1 October 2017, Pages 930-949, https://doi.org/10.1016/j.msec.2017.05.127,  (M21, IF=4.164)

  
  

  29. Milan Zdravković, Fernando Luis-Ferreira, Ricardo Jardim-Goncalves, Miroslav Trajanović, On the formal definition of the systems’ interoperability capability: an anthropomorphic approach, Enterprise Information Systems, Volume 11, 2017 - Issue 3, pp389-413, DOI:10.1080/17517575.2015.1057236 (M22, IF=1,908)

  
  

  30. Rashid, M M, Husain, K N, Vitković, N, Manić, M, Trajanović, M, Mitković, M B, Mitković, M M, Geometrical Model Creation Methods for Human Humerus Bone and Modified Cloverleaf Plate, JSIR Vol.76(10), October 2017, pp 631-639, ISSN: 0975-1084 (Online); 0022-4456 (Print) (M23, IF=0,557)

  
  

  31. Miroslav Trajanović, Milica Tufegdžić, Stojanka Arsić, Obtaining patient-specific point model of the human ilium bone in the case of incomplete volumetric data using the method of parametric regions, Australasian physical and engineering sciences in medicine, December 2018, Volume 41, Issue 4, pp 931–944, https://doi.org/10.1007/s13246-018-0689-9, (M23, IF=1,032)

  
  

  32. NikolaVitković, Miloš Stojković, Vidosav Majstorović, Miroslav Trajanović, Jelena Milovanovića, Novel design approach for the creation of 3D geometrical model of personalized bone scaffold, CIRP Annals, Volume 67, Issue 1, 2018, Pages 177-180, https://doi.org/10.1016/j.cirp.2018.04.064 , (M21, IF=3,333)

  
  

  33. Nikola Vitković, Srđan Mladenović, Milan Trifunović, Milan Zdravković, Miodrag Manić, Miroslav Trajanović, Dragan Mišić, and Jelena Mitić, Software Framework for the Creation and Application of Personalized Bone and Plate Implant Geometrical Models, Journal of Healthcare Engineering, vol. 2018, Article ID 6025935, 11 pages, 2018. https://doi.org/10.1155/2018/6025935, (M23, IF=1.261)

  
  

  34. Stojkovic Milos, Veselinovic Marko, Vitkovic Nikola, Marinkovic Dragan, Trajanovic Miroslav, Arsic Stojanka, Mitkovic Milorad, Reverse Modelling of Human Long Bones Using T-Splines - Case of Tibia, TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2018, 25 (6):1753-1760, (M23, IF=0.644)

  
  

  35. Vitkovic Nikola, Radovic Ljiljana, Trajanovic Miroslav, Manic Miodrag, 3D Point Cloud Model of Human Bio Form Created by the Application of Geometric Morphometrics and Method of Anatomical Features: Human Tibia Example, FILOMAT, (2019), vol. 33 br. 4, str. 1217-1225, (M23, IF=0.848)

  
  

  36. Nikola Korunovic, Dragan Marinkovic, Miroslav Trajanovic, Manfred Zehn, Milorad Mitkovic, Saverio Affatato, In Silico Optimization of Femoral Fixator Position and Configuration by Parametric CAD Model, Materials 2019, 12(14), 2326; https://doi.org/10.3390/ma12142326 (M22, IF=2.972)

  
  

  37. Husain Karim, Stojkovic Milos, Vitkovic Nikola, Milovanovic Jelena, Trajanovic Miroslav, Rashid Mohammed, Milovanovic Aleksa, Procedure for Creating Personalized Geometrical Models of the Human Mandible and Corresponding Implants, TECHNICAL GAZETTE, (2019), vol. 26 br. 4, str. 1044-1051, (M23, IF=0.670)

  
  

  38. Mitic Jelena, Vitkovic Nikola, Manic Miodrag T, Trajanovic Miroslav D, Petrovic Sladjana, Arsic Stojanka, Reverse modeling of the human mandible 3D geometric model, Vojnosanitetski pregled, 2020, Volume 77, Issue 3, Pages: 262-270, https://doi.org/10.2298/VSP170727063M (M23, IF=0,272)

• Radovi u ostalim časopisima:

  1.      Miroslav Trajanović, Opšti prikaz vibracionih bunkera sa zavojnim žljebom, Naučni podmladak, br.1/2,pp 31-40 1977., Niš.

  
  

  2.      Temeljkovski Dragan, Miroslav Trajanović,  Prilog rasmatranju problema orijentacije  delova  u  okruglim  vibracionim dodavačima, (koautor), SIMOD, 1977., Niš.

  
  

  3.      Miroslav Trajanović, Primer statičke i dinamičke identifikacije ekscentarske prese, SIMOD,  br. 1/2, 1978. , Niš, pp 165-179.

  
  

  4.      Miroslav Trajanović, Ručno programiranje numerički upravljanih mašina, Naučni podmladak, 3/4, 1981., Niš, pp 13-36.

  
  

  5.      Mihajlović  Dragan, Miroslav Trajanović, Morfometrijski aspekti malignih  epitelnih  tumora.  I-pločasto  slojeviti epitel,   Acta   facultatis   medicae Naissensis, Niš, 1985, pp 93-103.

  
  

  6.      Miroslav Trajanović, Razvoj web servera sa podacima o materijalima, standardnim delovima i proizvodima - Web engineering inicijativa Mašinskog fakulteta u Nišu, časopis IMK-14, godina II, broj 4, pp 59-63, Kruševac, 1996

  
  

  7.      Miroslav Trajanović, Ljubodrag Đorđević, EXI - Ekspertni sistem za idealizaciju modela za MKE analizu, časopis IMK-14, godina III, broj 2, pp 17-22, Kruševac, 1997.

  
  

  8.      Nikola Korunović, Miroslav Trajanović, Modeliranje gume kao materijala u programima za analizu metodom konačnih elemenata, Svet polimera, 2 (2-3) 39-84, 1999, IPG Društvo inženjera plastičara, Beograd, pp 43-51.

  
  

  9.      Miloš Stojković, Milan Cekić, Goran Jovanović, Miroslav Trajanović, Unapređenje projektovanja pneumatika primenom parametarskog projektovanja, Automobilska tehnika za bolji kvalitet života (specijalni broj Nauka i motorna vozila 99), JUMV -SP -9902, Beograd, 1999, pp 97-100.

  
  

  10.  Mišić Dragan, Miodrag Manić, Miroslav Trajanović, Step standard - most između različitih CAD sistema,  Časopis IMK-14 Istraživanje i razvoj, Godina V, Br. 10, 1999, pp 75-80.

  
  

  11.  N.Korunović, M.Stojković, M. Trajanović, Moderni CAD sistemi u mašinstvu, časopis JISA Info, Beograd, 2/2001, pp.52-54

  
  

  12.  Jelena Milovanović, ,Primena komercijalnih rapid prototyping tehnologija u industriji pneumatika, časopis IMK-14 Istraživanje i razvoj, broj 16-17, 2003, Kruševac, pp115 - 122

  
  

  13.  Aleksandar Pantović, M. Trajanović, Modeliranje procesa istosmernog istiskivanja u hladnom stanju za analizu metodom konačnih elemenata, časopis IMK-14 Istraživanje i razvoj, broj 16-17, 2003, Kruševac, pp 61 – 68

  
  

  14.  Modeliranje gume za potrebe analize pneumatika primenom metode konačnih elemenata, (koautori N.Korunović, D.Manić, M.Manić), Časopis Svet polimera, vol. 7 (3), 73-108, 2004, pp 85 - 94

  
  

  15.  M. Stojkovic, M. Manic, M. Trajanovic, Knowledge-Embedded Template Concept, CIRP - Journal of Manufacturing Systems, Vol. 34 (2005), No 1

  
  

  16.  N.Korunović, M.Trajanović, M.Stojković, Računarom podržana simulacija ponašanja statički opterećenog pneumatika, Časopis IIPP, No. 10 – 2005, godina III, pp 55-67

  
  

  17.  M. Stojković, N. Korunović, Miroslav Trajanović Računarom podržano projektovanje pneumatika, Časopis  Istraživanja i projektovanja za privredu, br.8, 2005, pp. 19-32

  
  

  18.  N.Korunović, M.Trajanović, M.Stojković, FEA of tyres subjected to static loading, Journal of the Serbian Society for Computational Mechanics, Vol 1, No 1, SDRM, 2007

  
  

  19.  Zdravković, M., Trajanović, M., Manić, M., „SOA - zasnovan pristup u implementaciji planiranja poslovnih resursa u malim preduzećima“, FACTA UNIVERSITATIS, Mechanical Engineering Series, Vol.5, No.1, 2007,pp.97-104, 2007

  
  

  20.  J. Milovanović, M. Trajanović, “Medical applications of rapid prototyping“ Facta Universitatis series Mechanical engineering, vol 5, no 1, 2007, pp 79-85

  
  

  21.  Zdravković, M., Trajanović, M., Vitković, N., Izazovi SOA-zasnovanih virtuelnih preduzeća“, InfoM - Journal of Information Technology and Multimedia Systems, Vol.25, 2008

  
  

  22.  N.Korunović, M.Trajanović, M.Stojković, Finite Element Model For Steady-State Rolling Tire Analysis, Journal of the Serbian Society for Computational Mechanics, Vol 2, No 1, SDRM, 2008.

  
  

  23.  Trajanović M., Mitković M., Vitković N., Milovanović J., Definisanje zahteva aplikacije za planiranje operacija u hirurgiji koštano zglobnog sistema, IMK-14 Istraživanje i razvoj, godina XV, broj 1-2, 2009., pp 5-11

  
  

  $124.  Milovanović J., Trajanović M., Vitković N., Stojković M., Rapid prototyping tehnologije i materijali za izradu implantata, IMK-14 Istraživanje i razvoj, godina XV, broj 1-2, 2009., pp 23-29.

  
  

  25.  S.Vulovic, N.Korunovi, M.Trajanovic, N.Grujovic, N. Vitkovic, Finite element analysis of CT based femur model using finite element program PAK, Journal of the Serbian Society for Computational Mechanics, Vol. 5, No. 2, 2011, pp. 160-166

  
  

  26.  Golubović, Ivan; Stojiljković, Predrag; Golubović, Zoran; Stevanović, Goran; Višnjić, Aleksandar; Trenkić, Milan; Stojiljković, Danilo; Najman, Stevo; Mihailović, Dragan; Kostić, Igor; Trajanović, Miroslav, Gasna gangrena nakon otvorenog preloma potkolenice, prikaz bolesnika, Acta Medica Medianae, Jun2012, Vol. 51 Issue 2, p25-30

  
  

  27.  Zoran Golubović, Predrag Stojiljković, Ivan Golubović, Zoran Radovanović, Aleksandar Višnjić, Branko Ristić, Katarina Kutlešić Stojanović, Milan Trenkić, Stevo Najman, Miroslav Trajanović, External fixation in the management of closed segmental tibial fractures, Acta Facultatis Medicae Naissensis, Volume 30, Issue 1, February 2013, Pages 37-44

  
  

  28. Nikola Korunović, Miloš Stojković, Dragan Mišić, Miroslav Trajanović, FEM based parametric design study of the tire profile using dedicated CAD model and translation code, Facta universitatis, Series: Mechanical Engineering Vol. 12, No 3, 2014, pp. 209 - 222

  
  

  29. I. Golubović, P. Stojiljković, Z. Golubović, S. Jeremić, M. Radojković,  G. Stevanović, S. Najman, D. Mihailović, S. Petrović, Z. Radovanović, S. Stamenić, S. Stojanović, M. Trenkić Bozinovic, L. Lazović, V. Živković, A. Tasić, M. Trajanović, Leg conquasation caused by petrol tiller with open lower leg fracture, Acta Medica Medianae, Vol. 53, No 1, pp 34 - 41 March, 2014

  
  

  30. Nikola Korunović, Miloš Madić, Miroslav Trajanović, Miroslav Radovanović, "A procedure for multi-objective optimization of tire design parameters", International Journal of Industrial Engineering Computations 11/2014; 6(2). DOI: 10.5267/j.ijiec.2014.11.003

  
  

  31. Miloš Madić, Miroslav Radovanović, Miroslav Trajanović and Miodrag Manić, Analysis of correlations of multiple-performance characteristics for optimization of CO2 laser nitrogen cutting of AISI 304 stainless steel, Journal of Engineering Science and Technology Review Volume 7, Issue 2, 2014, Pages 16-21

  
  

  32. Miloš Madić, Miroslav Radovanović, Miodrag Manić, Miroslav Trajanović, Optimization of CO2 Laser Cutting Process using Taguchi and Dual Response Surface Methodology, Tribology in Industry, Volume 36, Issue 3, 2014, Pages 236-243

  
  

  33. Nikola Korunović, Miloš Madić, Miroslav Trajanović, Miroslav Radovanović, A procedure for multi-objective optimization of tire design parameters, International Journal of Industrial Engineering Computations, Volume 6, Issue 2, 1 March 2015, Pages 199-210

  
  

  34. M. Madić, M. Radovanović, M. Trajanović, M. Manić, Multi-objective optimisation of laser cutting using cuckoo search algorithm, Journal of Engineering Science and Technology, Vol. 10, No. 3 (2015) 353 – 363

  
  

  35. Miroslav Trajanović, Osiris Canciglieri Jr, Biomedical engineering - one of the greatest engineering challenges, Editorial, Facta Universitatis, Series: Mechanical Engineering  Vol 13, No 3 (2015), pp i-ii

  
  

  36. Jelena Milovanović, Miloš Stojković, Miroslav Trajanović, Applicability analysis of additive manufacturing processes in the fabrication of anatomically shaped lattice scaffolds, Facta Universitatis, Series: Mechanical Engineering  Vol 13, No 3 (2015), pp 295-395

  
  

  37. Milan Zdravković, Miroslav Trajanović, Dragan Pavlović, Ontological framework for knowledge management in orthopedic surgery, Facta Universitatis, Series: Mechanical Engineering  Vol 13, No 3 (2015), pp 325-336

  
  

  38. Dragan Ivanović, DušanSurla, MiroslavTrajanović, DraganMisić, ZoraKonjović, Towards the Information System for Research Programmes of the Ministry of Education, Science and Technological Development of the Republic of Serbia, Procedia Computer Science, Volume 106, 2017, Pages 122-129

  
  

  39. Stojanka Arsić, Milena Trandafilović, Sonja Janković, Dragana Ilić, Bojan Nedović, Nikola Vitković, Miloš Stojković, Milica Tufegdžić, Jelena Mitić, Miroslav Trajanović, Analysis of the human cephalometric parameters important for dental practice, Facta Universitatis, Series:Medicine and biology, Vol. 21, No 2, 2019.,

• Radovi na naučnim skupovima međunarodnog značaja:

  $11.      Miroslav Trajanović, Dragan Domazet, Analysis of the Potential  Error  sources  in the  Finite  Element  Static analysis  of  Structures,   II International Conference   on  Quality  Assurance   and   Standards   in   FEM,   NAFEMS,  Stratford-upon-Avon,1989, 28-41.

  
  

  $12.      D.Domazet, M.Manić, M. Trajanović, CIMROT - System for Concurrent Design, Engineering and Proces Planing of Rotational Parts, International Conference and Exibition on Computer Integrated Manufacturing - ICCIM '93, Singapore, 1993, pp 243-253.

  
  

  $13.      Miodrag Manić, Dragan Domazet, Dragan Mišić, Dragan Milčić, Miroslav Trajanović, Expert system for shafts manufacturing automatic process planning, International conference on CIM, Zakopane, May 1996.,

  
  

  $14.      Dragan Milčić, Vojislav Miltenović, Miodrag Manić, Dragan Domazet, Dragan Mišić, Miroslav Trajanović, CAD system zum automatischen konstruiren von wallen, International conference on CIM, Zakopane, May 1996.

  
  

  $15.      Miroslav Trajanović, Miodrag Manić, Dragan Mišić, Rapid Product Development in Metalworking Industry by Using Web Servers, International Computer Science Conference microCAD ’97, Miskolc, 26-27.2.1997.

  
  

  $16.      Miroslav Trajanović, Miodrag Manić, Goran Janevski, Expert System for Model Idealisation for FEM analysis, 32. MATADOR - International Mashine Tool Design and Research Conference, UMIST, Manchester, 10.-11.7.1997., pp 545-550.

  
  

  $17.      Manić M., Domazet D., Mišić D., Trajanović M., The Modelling Approach of Data and Knowledge Bases of Expert CAPP Systems, 32. MATADOR - International Mashine Tool Design and Research Conference, UMIST, Manchester, 10.-11.7.1997., pp 237-242.

  
  

  $18.      Miroslav Trajanović, Svetlana Cvetanović, Ljiljana Domazet, An Approach to building of Internet Services for production Models, ICCIM 2000, Singapoore, 2000.

  
  

  $19.      M. Stojkovic, M. Manic, M. Trajanović, Knowledge-Embedded Template Concept,  Proceedings 36th CIRP International Seminar on Manufacturing Systems, 2003, p.p. 285-293.

  
  

  $110.  M. Stojkovic, M. Manic,  N. D. Korunovic, M.D. Trajanović, Customized Tire Design Solution Based on Knowledge Embedded Template Concept, 27. Annual Meeting and Conference on Tire Science and Technology, Acron, 2003

  
  

  $111.  M. Stojkovic, M. Manic,  N. D. Korunovic, M.D. Trajanović, Functional Model of the Tire Tread, Twenty-Third Annual Meeting and Conference of The Tire Society, Akron, Ohio, U.S. September 20-21, 2004.

  
  

  $112.  J.Milovanovic, M.Stojkovic, M. Trajanović, Possibilities of using selective laser melting for tire mold manufacturing,  Proceedings 2nd International Conference on Manufacturing Engineering ICMEN, 2005, pp. 731-740.

  
  

  $113.  M. Stojkovic, M. Manic, M. Trajanović, On semantics of design and manufacturing features in digital product model, Proceedings 2nd International Conference on Manufacturing Engineering ICMEN, 2005, pp. 731-740.

  
  

  $114.  Nikola Korunović, Miloš Stojković, Miroslav Trajanović, Static FEA and tyre design, Zbornik radova 7. Magdeburger Maschinenbau-Tage, Virtuelle Prodikt und Prozessentwicklung, Magdeburg 2005, pp. 297-305.

  
  

  $115.  Milos S. Stojkovich, Miodrag T. Manich, Miroslav D. Trajanovich, Nikola D. Korunovich “Semantic Structures In The Product Data Model”, Proceedings: Product Lifecycle Management Accessing the industrial relevance – SP3, Milano, July 2007, p.p. 227-234

  
  

  $116.  Milos S. Stojkovic, Miodrag Manic, Miroslav Trajanovic, Nikola Korunovic “Active Semantic Model оf Product Design And Manufacturing Features” Proceedings 40th CIRP International Seminar on Manufacturing Systems, May 2007

  
  

  $117.  N.Korunović, M.Trajanović, M.Stojković, “Steady state rolling analysis of tyres: a cavity shape study”, Proceedings 8th Magdeburg days of mechanical engineering & 7th MAHREG innovation forum, 2007, p.p. 129-135

  
  

  $118.  M. Trajanovic, D. Domazet; B. Misic – Ilic, Distance Learning аnd Foreign Language Teaching, 3rd Balkan Conference in Informatics (BCI’2007), Sofia, 2007

  
  

  $119.  Trajanovic M., Vitkovic N., Stojkovic M., Manic M., Arsic S., The morphological approach to geometrical modelling of the distal femur, SEECCM 2009, 2nd South-East European Conference on Computational Mechanics, An IACM-ECCOMAS Special Interest Conference, Rhodes, Greece, 22–24 June 2009

  
  

  $120.  Nikola Korunovic, Miroslav Trajanovic, Milos Stojkovic, Dragan T. Misic, Finite element model for parametric studies of tire geometry using steady state rolling analysis, SEECCM 2009, 2nd South-East European Conference on Computational Mechanics, An IACM-ECCOMAS Special Interest Conference, Rhodes, Greece, 22–24 June 2009

  
  

  $121.  M. Stojkovic, M. Trajanovic , N. Vitkovic, J. Milovanovic, S. Аrsic, M. Mitkovic , Referential geometrical entities for reverse modeling of geometry of femur,  Computational Vision and Medical Image Processing - VipIMАGE 2009, Porto, Portugal, 14.-16. October 2009

  
  

  $122.  Zdravković M., Panetto H., Trajanović M., Concept of Semantic Information Pool for manufacturing supply networks, 5th International Working Conference ’’ Total Quality Management’’ ,   1st- 4th June,   2009,  Belgrade

  
  

  $123.  Milan Zdravkovic, Herve Panetto, Miroslav Trajanovic, Towards an approach for formalizing the supply chain operations, I-SEMANTICS '10, Graz, Proceedings of the 6th International Conference on Semantic Systems, ACM 2010, ISBN: 978-1-4503-0014-8, DOI: 10.1145/1839707.1839732

  
  

  $124.  Nikola Korunović, Miroslav Trajanović, Jelena Milovanović, Miloš Stojković, Nikola Vitković, Bone modelling for structural analysis using FEM, Proceedings of The International conference Mechanical Engineering in XXI Century, Niš, 2010, pp 205- 208

  
  

  $125.  Nikola Vitković, Miroslav Trajanović, Jelena Milovanović, Nikola Korunović, Stojanka Arsić, Dragana Ilić, The geometrical models of the human femur and its usage in application for preoperative planning in orthopedics, ICIST 2011, 1st International Conference on Internet Society Technology and Management, Kopaonik 2011, Serbia

  
  

  $126.  Milan Zdravković, Miroslav Trajanović, Towards a formal framework for semantic interoperability in supply networks, ICIST 2011, 1st International Conference on Internet Society Technology and Management, Kopaonik 2011, Serbia

  
  

  $127.  Milan Zdravković, Miroslav Trajanović, Hervé Panetto, Local ontologies for semantic interoperability in supply chain networks, ICEIS 2011, 13th International Conference on Enterprise Information Systems, Beijing, China, 2011

  
  

  $128.  Milan Zdravkovic, Miroslav Trajanovic, Ontological framework for performance measurement of supply chain operations, 6th International Working Conference ’’Total Quality Management - Advanced and Intelligent Approaches’’, With Second Special Conference ’’Manufuture in Serbia 2011’’, 7th– 11th June, Belgrade , 2011, pp 47-52

  
  

  $129.  Saša Randjelović, Miroslav Trajanović, Bratislav Denić, Generating new products according to international standards and competitive automotive market, The 7th International conference: Research and development of mechanical elements and systems, IRMES, Zlatibor, 2011

  
  

  $130.  Nikola Korunović, Miroslav Trajanović, Miloš Stojković, Nikola Vitković, Milan Trifunović, Jelena Milovanović, Tire Tread Modeling for FEA, Proceedings of 34. International Conference on Production Engineering, pp 209-212, Niš, 2011

  
  

  $131.  Dragan Mišić, Nikola Vitković, Miloš Stojković, Milan Zdravković, Miroslav Trajanović, Resources Management in Workflow Management Systems, Proceedings of 34. International Conference on Production Engineering, pp 243-248, Niš, 2011

  
  

  $132.  Milan Trifunović, Jelena Milovanović, Miroslav Trajanović, Nikola Korunović, Miloš Stojković, Approaches to Automated Creation of Tissue Engineering Scaffolds, Proceedings of 34. International Conference on Production Engineering, pp 335-338, Niš, 2011

  
  

  $133.  Nikola Vitković, Jelena Milovanović, Miroslav Trajanović, Nikola Korunović, Miloš Stojković, Miodrag Manić, Methods for Creating Geometrical Model of Femur Anatomical Axis, Proceedings of 34. International Conference on Production Engineering, pp 351-354, Niš, 2011

  
  

  $134.  Marko Veselinović, Dalibor Stevanović, Miroslav Trajanović, Miodrag Manić, Stojanka Arsić, Milan Trifunović, Dragan Mišić, Method for Creating 3D Surface Model of the Human Tibia, Proceedings of 34. International Conference on Production Engineering, pp 355-358, Niš, 2011

  
  

  $135.  Milan Zdravković, Miroslav Trajanović, Herve Panetto, Alexis Aubry, Mario Lezoche, Ontology-Based Supply Chain Process Configuration, Proceedings of 34. International Conference on Production Engineering, pp 399-402, Niš, 2011

  
  

  $136.  Zdravkovic, M., Trajanovic, M., Towards Semantic Interoperability Service Utilities. In: R. Meersman, T. Dillon, and P. Herrero (Eds.): OTM 2011 Workshops, Lecture Notes in Computer Science, Volume 7046/2011, pp. 39–48, © Springer-Verlag Berlin Heidelberg, DOI: 10.1007/978-3-642-25126-9_12

  
  

  $137.  Nikola Vitković, Dragan Mišić, Miodrag Manić, Miroslav Trajanović, Milan Trifunović: The Fuzzy Expert System for the Selection of Optimal Scanning Method, Metalurgia International vol. XVII no. 8 (2012), pp 62-66, ISSN: 1582 – 2214, (M23, IF=0,134)

  
  

  $138.  Stevanović, D., Korunović, N., Trajanović, M., Trifunović, M., Milovanović, J., Stojković, M., Finite element model of human tibia and preliminary analysis, 11th International Scientific Conference MMA 2012 - Advanced Production Technologies, Novi Sad, 2012,  pp 289-292

  
  

  $139.  Radulović, J., Mijailović, N., Trajanović, M., Filipović, N., Radulović, N., Estimation of exposure dose of human head during CT scanning procedure using Monte Carlo simulation, 11th International Scientific Conference MMA 2012 - Advanced Production Technologies, Novi Sad, 2012,  pp 513-516

  
  

  $140.  Trajanović, M., Tufegdžić, M., Arsić, S., Veselinović, M., Vitković, N., Reverse engineering of the human fibula, 11th International Scientific Conference MMA 2012 - Advanced Production Technologies, Novi Sad, 2012,  pp 527-530

  
  

  $141.  Vitković, N., Veselinović, M., Mišić, D., Manić, M., Trajanović, M., Mitković, M., Geometrical models of human bones and implants, and their usage in application for preoperative planning in orthopedics, 11th International Scientific Conference MMA 2012 - Advanced Production Technologies, Novi Sad, 2012, pp 539-542

  
  

  $142.  Ž. Mitić, M. Vukelić, N. Ignjatović, D. Uskoković, P. Vasiljević, S. Najman, M. Trajanović, ATR-FTIR microspectroscopic characterization of nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid, 11th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Belgrade, Serbia, H-12-P (2012), pp 456–458, ISBN 978-86-82475-27-9

  
  

  $143.  S. Randjelović, D. Mišić, M. Trajanović, N. Vitković, M. Veselinović, Customization of elements for orthopedic external and internal fixation, 5th International conference MCP CE 2012, University of Novi Sad, pp 194-197, ISBN 978-86-7892-432-3

  
  

  $144.  Milan Zdravković, Miloš Stojković, Dragan Mišić, Miroslav Trajanović, Towards semantic interoperability framework for custom orthopaedic implants manufacturing, IFAC Proceedings Volumes (IFAC-PapersOnline), Volume 14, Issue PART 1, 2012, Pages 1327-1332, 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'12; Bucharest; 23-25 May 2012

  
  

  $145.  Milan Zdravković, Miroslav Trajanović, On the data interoperability issues in SCOR-based supply chains, 7th International Workshop on Enterprise Integration, Interoperability and Networking (EI2N'2012), ISBN: 978-3-642-33617-1, Springer, Heidelberg, 2012, pp 154-161

  
  

  $146.  Milan Zdravković, Hervé Panetto, Miroslav Trajanović, Semantic Interoperability for Dynamic Product-Service Business Ecosystems, ICIST 2013, Kopaonik, 2013

  
  

  $147.  Milan Zdravković, Miroslav Trajanović, On the Semantic Issues of Electronic Health Records for Virtual Physiological Human Infrastructures, ICIST 2013, Kopaonik, 2013

  
  

  $148.  Dalibor M. Stevanović, Nikola M. Vitković, Marko M. Veselinović, Miroslav D. Trajanović, Miodrag T. Manić, Milorad B. Mitković, Parametrization of internal fixator by Mitkovic, International Working Conference ’’Total Quality Management – Advanced and Intelligent Approaches’’,   4th – 7th June, 2013.,  Belgrade, Serbia, pp 541-544

  
  

  $149.  Milos S. Stojkovic, Nikola D. Korunovic, Miroslav D. Trajanovic,
  Jelena R. Milovanovic, Milan B. Trifunovic, Nikola M. Vitkovic, Design study of anatomically shaped lattice scaffolds for the bone tissue recovery, SEECCM III,   3rd South-East European Conference on Computational Mechanics-an ECCOMAS and IACM Special Interest Conference, M. Papadrakakis, M. Kojic, I. Tuncer (eds.), Kos Island, Greece, 12–14 June 2013

  
  

  $150.  Nikola D. Korunovic, Miroslav D. Trajanovic, Dalibor M. Stevanovic, Nikola M. Vitkovic, Milos S. Stojkovic, Jelena R. Milovanovic, Dragana S. Ilic, Material characterization issues in FEA of long bones, SEECCM III,   3rd South-East European Conference on Computational Mechanics-an ECCOMAS and IACM Special Interest Conference, M. Papadrakakis, M. Kojic, I. Tuncer (eds.), Kos Island, Greece, 12–14 June 2013

  
  

  $151.  Miroslav Trajanović, Milica Tufegdžić, Stojanka Arsić, Dragana Ilić, Morphometric Analysis of the Hip Bone as the Basis for Reverse Engineering, Proceedings of the 2nd International Conference Mechanical Engineering in XXI Century, 20-21Jun 2013, Nis, Serbia, pp 107-110

  
  

  $152.  Stojanka Arsić, Dragana Ilić, Milorad Mitković, Milica Tufegdžić, Sonja Janković, Miroslav Trajanović, The Study of Morphological Parameters of Human Acetabulum Significant for Hip Arthroplasty, Proceedings of the 2nd International Conference Mechanical Engineering in XXI Century, 20-21Jun 2013, Nis, Serbia, pp 115-120

  
  

  $153.  Nikola Vitković, Miodrag Manić, Miroslav Trajanović, Dragan Mišić, Milorad Mitković, Tanja Arh, Pipan Matić, E-learning system for medical education based on the geometrical models of human bones and fixators, Proceedings of the 4th International conference on e-Learning, Belgrade, 2013, pp 10-14 

  
  

  54. J. Najdanovic, S. Najman, V. Cvetkovic, D. Trickovic, J. Zivanov-Curlis, J. Zivkovic, M. Trajanovic, The effect of endothelial supplements on endothelial cell differentiation of BALB/c mice adipose tissue-derived mesenchymal cells in vitro, Proceedings of EORS 2014, 22nd Annual Meeting, Nantes, France; 07/2014

  
  

  55. Nikola Vitković, Mohammed Rashid, Miodrag Manić, Dragan Mišić, Miroslav Trajanović, Jelena Milovanović, Stojanka Arsić, Model-Based System for the creation and application of modified cloverleaf plate fixator, ICIST 2015, Kopaonik

  
  

  56. Saša Randjelović, Dragan Mišić, Milena Mišić, Igor Kostić, Dejan Tanikić: Software support for FMEA analysis in orthopedic surgery, MMA 2015, Novi Sad, Serbia, 2015

  
  

  57. Rashid, М., Husain, K., Vitković, N., Manić, M., Trajanović, M., Milovanović, J.,  Radović, Lj., Reverse Modeling of Human Humerus by The Method Of Anatomical Features (MAF), Proceedings of the International Working Conference Total Quality Management – Advanced and Intelligent Approaches, Belgrade, Serbia, 2 – 5 June, 2015., pp 197-202

  
  

  58. Jasna Radulovic, Nikola Mijailovic, Vesna Rankovic, Miroslav Trajanovic and Nenad Filipovic, Modeling of Radiation Dose of Human Head During CT Scanning Using Neural Networks, Proceedings of 15th IEEE International Conference on BioInformatics and BioEngineering, Belgrade, November 2-4, 2015

  
  

  59. Miodrag Manic, Zoran Stamenkovic, Nikola Vitkovic, Milos Stojkovic, MiroslavTrajanovic, Jelena Mitic and Sladjana Petrovic, Customized anatomically adjusted implants type plate for mandible fixation, Proceedings of 15th IEEE International Conference on BioInformatics and BioEngineering, Belgrade, November 2-4, 2015

  
  

  60. Marcelo Rudek, Cesar Luiz Rizzatti Junior, Anderson Luis Szejka, Osiris Canciglieri Junior and Miroslav Trajanovic, Proposal for an Image-Based Software System for Dental Implant Positioning, Proceedings of 15th IEEE International Conference on BioInformatics and BioEngineering, Belgrade, November 2-4, 2015

  
  

  61. Jelena G. Najdanović, Stevo J. Najman, Sanja Stojanović, Jelena M. Živković, Nenad Ignjatović, Dragan Uskoković and Miroslav Trajanović, The Influence of Nanomaterial Calcium Phosphate/poly-(dl-lactide-co-glycolide) on Proliferation and Adherence of HeLa Cells, Lee B., Gadow R., Mitic V. (eds), Proceedings of the IV Advanced Ceramics and Applications Conference, Atlantis Press, Paris, 2017, pp 387-400

  
  

  62. Jelena Mitić, Miloš Madić, Nikola Vitković, Miodrag Manić, Miroslav Trajanović, Optimal Selection of Morphometric Parameters for the Creation of Parametric Model of the Human Mandible Coronoid Process, Book of Proceedings, SEECCM 2017, Fourth South-East European Conference on Computational Mechanics, 3-4th July 2017, Kragujevac, pp 87-93

  
  

  63. Dragan Ivanović, DušanSurla, MiroslavTrajanović, DraganMisić, ZoraKonjović, Towards the Information System for Research Programmes of the Ministry of Education, Science and Technological Development of the Republic of Serbia, Procedia Computer Science, Volume 106, 2017, Pages 122-129

  
  

  64. Ćojbašić, Ž., Ćojbašić, I., Marković, N., Trajanović, M. Machine Learning Leukemia clinical outcome prediction. In: Konjović, Z., Zdravković, M., Trajanović, M. (Eds.) ICIST 2018 Proceedings Vol.1, pp.169-172, 2018

  
  

  65. Žarko Ćojbašić, Nemanja Marković, Nedeljko Dučić, Miroslav Trajanović, Marina Stojiljković, and Andrija Petrušić, Deep Learning and IoT Based Load/Demand Forecasting for District Heating. In: Konjović, Z., Zdravković, M., Trajanović, M. (Eds.) ICIST 2018 Proceedings Vol.1, pp.192-195, 2018

  
  

  66. Mitić, J., Vitković, N., Manić, M., Trajanović, M. Improvement of the geometrical accuracy of the human mandible body parametric model. In: Konjović, Z., Zdravković, M., Trajanović, M. (Eds.) ICIST 2018 Proceedings Vol.1, pp.228-231, 2018

  
  

  67. Nemanja Zdravković, Marina Damnjanović, Dragan Domazet, Vijayakumar Ponnusamy, Miroslav Trajanović, Implementing Blockchain Technology for Data Protection in Health-IoT and Diagnostic Devices: Overview, Potential, and Issues, In: Konjović, Z., Zdravković, M., Trajanović, M. (Eds.) ICIST 2020 Proceedings of the International Conference on Information Society and Technology held on Kopaonik, Serbia on Mar 8-11, 2020., pp 211-215

  
  

  68. Jelena Mitić, Nikola Vitković, Miodrag Manić, Miroslav Trajanović, Reconstruction of the missing part in the human mandible, In: Konjović, Z., Zdravković, M., Trajanović, M. (Eds.) ICIST 2020 Proceedings of the International Conference on Information Society and Technology held on Kopaonik, Serbia on Mar 8-11, 2020., pp 202-205

  
  

  69. Veljko Grković​, Jovana Jović, Nemanja Zdravković, Miroslav Trajanović, Dragan Domazet, Vijayakumar Ponnusamy, Usage of Blockchain Technology for Sensitive Data Protection – Medical records Use Case, In: Konjović, Z., Zdravković, M., Trajanović, M. (Eds.) ICIST 2020 Proceedings of the International Conference on Information Society and Technology held on Kopaonik, Serbia on Mar 8-11, 2020., pp 216-221

  
  

  70. Mišić Dragan, Trajanović Miroslav, Korunović Nikola, Vitković Nikola, Assessment of Human Neuromuscular System State Using Standard Human-Computer Interaction, In: Konjović, Z., Zdravković, M., Trajanović, M. (Eds.) ICIST 2020 Proceedings of the International Conference on Information Society and Technology held on Kopaonik, Serbia on Mar 8-11, 2020., pp 27-31,

• Radovi na domaćim naučnim skupovima:

  $11.      Temeljkovski Dragan, Trajanović Miroslav, Prilog rasmatranju problema kretanja u  vibracionim  dodavačima,  (koautor), Zbornik radova II jugoslovenskog simpozijuma Mašine i mehanizmi, univerzitetska istraživanja i primena  u  industriji,  1977., Niš, pp 447-458.

  
  

  $12.      Miroslav Trajanović, Odredjivanje sopstvenih frekvencija i oblika oscilovanja strukture  alatne mašine  upotrebom  programa  DIMA,   Zbornik   radova   XIII   savetovanja proizvodnog mašinstva Jugoslavije, B.Luka, 1979., (koautori dr. Aleksandar Pavlović i Djordje Djordjević), pp 1-9.

  
  

  $13.      Aleksandar  Pavlović, Miroslav Trajanović, Numeričko upravljanje presom za ugaono  savijanje  lima,  XVI  savetovanje proizvosnog mašinstva  Jugoslavije,  Mostar, 1982. godine, pp 379-382.

  
  

  $14.      Dragan Domazet, Miroslav Trajanović, Metodi za analizu uticaja spojeva u višedelnim nosećim strukturama alatnih mašina na njihovu statičku  i  dinamičku  krutost,  pregled  istraživanja,  XIII Simpozijum Upravljanje proizvodnje u idustriji prerade metala, Beograd, 1983, pp 236-252.

  
  

  $15.      Dragan Domazet, Miroslav Trajanović, Prilog analizi krutosti vodjica alatnih mašina metodom konačnih elemenata, XVII  savetovanje  proizvodnog  mašinstva Jugoslavije, Budva, 1983, pp 217-221.

  
  

  $16.      Dragan Domazet, Miroslav Trajanović, Prilog ubrzanju postupka iterativnog odredjivanja krutosti spojeva metodom konačnih elemenata, Simpozijum PPPK, Stubičke toplice, 1983, pp 112-118.

  
  

  $17.      Miroslav Trajanović, Nikolić Zoran, Djirić  Zoran, Jedno rešenje sistema za izradu programa za numeričko upravljanje  alatnih mašina, BIAM 84,  Zagreb,  1984, pp 97-101.

  
  

  $18.      Miroslav Trajanović, Nikolić Zoran, Djirić  Zoran, Editor sistema za izradu programa za numeričko upravljanje alatnih mašina, XVII  Savetovanje  proizvodnog mašinstva Jugoslavije, Niš, 1984, pp 53-59.

  
  

  $19.      Miroslav Trajanović, Simić Tomislav, Pavlović  Sreten, Sistem za numeričko upravljanje elektrozavojnim presama,  XVIII  Savetovanje  proizvodnog  mašinstva Jugoslavije, Niš, 1984, pp 61-67.

  
  

  $110.  Aleksandar  Pavlović, Miroslav Trajanović, TDS-paket programa za  proračun  temperaturne  distribucije  u  lamelastim spojnicama metodom konačnih razlika, Zbornik radova-25 godina mašinstva, Niš, 1985, 23-31.

  
  

  $111.  Temeljkovski Dragan, Trajanović Miroslav, Neke preporuke za izbor polaznih  parametara  pri  projektovanju  zavojnih presa,  XVIII  Savetovanje   proizvodnog mašinstva Jugoslavije, Niš, 1984, 103-108.

  
  

  $112.  Koncept zajedničkog razvoja  RC  i  CNC  upravljanja,  (koautor  Novaković Radovan i dr  Dragan  Domazet)  IV  Jugoslovenski  simpozijum  za  primenu robotike, Vrnjačka Banja, 1985, pp 1-9.

  
  

  $113.  Miroslav Trajanović, Primena metode konačnih elemenata  u  analizi   ponašanja   struktura  pod uticajem termičkog opterećenja, I medjunarodni CIM seminar, Niš,  1987,  pp  391-410.

  
  

  $114.  Miroslav Trajanović, Klasifikacija  grešaka  pri  analizi struktura metodom konačnih  elemenata, II Jugoslovenski simpozijum CAD/CAM, Cavtat, 1989, pp 105-112.

  
  

  $115.  Miroslav Trajanović, Analiza procesa pripreme podataka za  statičku  analizu  struktura  metodom konačnih elemenata, III Jugoslovenski simpozijum CAD/CAM, Cavtat, 1990,  pp 137-146.

  
  

  $116.  Miroslav Trajanović, Analiza metoda za generisanje  mreže  konačnih  elemenata,  Simpozijum  "30 godina mašinstva, Niš, 1990, pp 199-204.

  
  

  $117.  Primena metode konačnih elemenata  za  analizu  naponskog  i  deformacionog stanja  tanke ploče  čija  je  srednja  površ  dvostruko  povezana  oblast, (Koautor mr Snežana Mitić) Zbornik na trudovi "IV Simpozijum za teoretska i primeneta  mehanika",  Ohrid, 1991, pp 223  - 228.

  
  

  $118.  Konverzija 2D modela rotacionih delova u 3D prostorni CSG model, (koautor: D.Domazet)  24. Savetovanje proizvodnog mašinstva Jugoslavije, Zbornik radova, Knjiga III, Novi Sad, 16-18 septembar 1992., str 57-62.

  
  

  $119.  Uporedna analiza projektovanja tehnoloških procesa izrade otvora pomoću ekspertnog sistema i pomoću matrice produkcionih pravila, (koautori: D.Domazet, M.Manić, D.Petrović) 24. Savetovanje proizvodnog mašinstva Jugoslavije, Zbornik radova, Knjiga III, Novi Sad, 16-18 septembar 1992., str 175-184.

  
  

  $120.  Primena metoda konačnih elemenata na rešavanje problema temelja kovačkih mašina, (koautori: LJ.Đorđević, D.Domazet, P.Popović) Zbornik radova Zbornik radova 25. savetovanja proizvodnog mašinstva Jugoslavije, Beograd, 1994, str. 557-562.

  
  

  $121.  Automatsko generisanje čvorova mreže konačnih elemenata unutar proizvoljne 2D konture, (koautori: M.Manić, D.Mišić, D.Domazet) 5. međunarodna naučno-stručna konferencija MMA 94 - Fleksibilne tehnologije, Novi Sad, 1994, pp 717-722.

  
  

  $122.  Metod fronta za automatsko generisanje mreže konačnih elemenata unutar proizvoljne 2D konture (koautori: M.Manić, D.Mišić, D.Domazet),  7. jugoslovenski simpozijum CAD/CAM, Beograd, 1994, str 39-44.

  
  

  $123.  Objektno orijentisano programiranje na primeru ekspertnog sistema za bušenje, (koautori: M.Manić, D.Domazet, D.Mišić) 13. jugoslovenski simpozijum CIM u strategiji tehnološkog razvoja industrije prerade metala, Beograd, 1994, str. 11-16.

  
  

  $124.  Koncept univerzalne softverske platforme za razvoj CAPP sistema, (koautori: D.Domazet, M.Manić, D.Mišić) Zbornik radova 25. savetovanja proizvodnog mašinstva Jugoslavije, Beograd, 1994, str. 343-348.

  
  

  $125.  Izbor alata kod CAPP sistema - generalni pristup, (koautori: M.Manić, D.Domazet, G.Devedžić, D.Mišić) 14. simpozijum CIM u strategiji tehnološkog razvoja industrije prerade metala, Beograd, 1995, str. 121-126.

  
  

  $126.  Neka iskustva u povezivanju grafičkih aplikacija zasnovanih na različitim grafičkim sistemima, (koautori: D.T.Mišić, M.Manić, D.R.Mišić, D.Domazet) 8. simpozijum CAD/CAM, Beograd, 1995, str. 99-104.

  
  

  $127.  Parametarska promena oblika mreže konačnih elemenata, (koautori: M.Manić, D.Mišić, D.Domazet) 8. simpozijum CAD/CAM, Beograd, 1995, str. 117-122.

  
  

  $128.  Prikaz programskog modula za konstruisanje abrihter glave, (koautori:  M.Nikodijević, M.Manić, D.T.Mišić, D.R.Mišić),  8. simpozijum CAD/CAM, Beograd, 1995, str. 53-58.

  
  

  $129.  Objektno-orijentisani model proizvoda u CADROT sistemu, (koautori Dragan Domazet, Mišić Dragan, Miodrag Manić), Naučno-stručni skup Istraživanje i razvoj mašinskih sistema i elemenata IRMES’95, Niš, 1995., Zbornik radova, pp. 44-49.

  
  

  $130.  Parametarsko konstruisanje proizvoda u CADROT sistemu, (koautori Mišić Dragan, Miodrag Manić, Dragan Domazet), Naučno-stručni skup Istraživanje i razvoj mašinskih sistema i elemenata IRMES’95, Niš, 1995., Zbornik radova, pp.  62-67.

  
  

  $131.  Jedan metod za ocenu oblika mreže trougaonih konačnih elemenata, (koautori Miodrag Manić, D. Domazet, D.Mišić), Naučno-stručni skup Istraživanje i razvoj mašinskih sistema i elemenata IRMES’95, Niš, 1995., Zbornik radova, pp. 56-61.

  
  

  $132.  Mogući koncept softverske platforme ekspertnih sistema u obradi metala rezanjem, Simpozijum o računarskim naukama i informatici, (koautori Dragan Domazet, Miodrag Mainić, Dragan Mišić, Goran Devedžić), YU-INFO’95, Brezovica, 1995.

  
  

  $133.  CAD sistem za crtanje i modeliranje limenih kontura RAVCAD,  (koautori: Miodrag Manić, Dejan Mišić, Dragan Mišić), 22. Jupiter konferencija, 9. Jugoslovenski simpozijum CAD/CAM, Beograd 1996., pp. 2.25-2.30,

  
  

  $134.  Objektni model 2D limene konture, (koautori: Miodrag Manić, Dragan Mišić, Goran Janevski, Dejan Mišić),  Simpozijum o računarskim naukama i informatici, YU-INFO’96, Brezovica, 1996.

  
  

  $135.  Računarska podrška sistema za projektovanje tehnoloških postupaka u metaloprerađivačkoj industriji, (koautori: Miodrag Manić, Dragan Mišić, Dejan Mišić, Goran Devedžić), Prvi naučno-stručni skup Informacione tehnologije IT-96, Žabljak, 1996.

  
  

  $136.  STEP model CADROT sistema, (koautori: Dragan Mišić, Miodrag Manić, Mirjana Mišić), 10. međunarodna konferencija Industrijski sistemi IS’96, Novi Sad, 1996.

  
  

  $137.  Ubrzanje procesa projektovanja proizvoda korišćenjem inženjerskih Web servera, (koautori: Miodrag Manić, Dragan Mišić), 10. simpozijum CAD/CAM, Beograd, 1997, pp 85-90

  
  

  $138.  Programska realizacija inženjerskih Web servera, (koautori: Dejan Kocić, Nikola Korunović), YU Info ’97, Brezovica, 1-4.4.1997.

  
  

  $139.  Modeliranje eksperimentalnog istraživanja tehničkog stanja alatnih mašina radi utvrđivanja ciklusa održavanja, (Koautori: Vladimir Ognjanović, Peđa Milosavljević), 24. Simpozijum o operacionim istraživanjima, SYMOPIS’97, Bečići, oktobar 1997, pp 541-544.

  
  

  $140.  Koncept inženjerskih Web servera, (koautori Branimir Đorđević, Dragan Domazet, Dušan Korunović), YU -Info '98, Kopaonik, 23-27.3.1998., pp 285-290.

  
  

  $141.  Moguće rešenje aplikacije za prijavu proizvoda u okviru Web inženjering sistema, (koautori Svetlana Cvetanović, Aleksandar Vasić, Nikola Korunović), YU -Info '98, Kopaonik, 23-27.3.1998., pp 297-301.

  
  

  $142.  Realizacija klijent - server arhitekture u programskom jeziku Java na primeru informacionog sistema biblioteke, (koautor Milan Zdravković), YU -Info '98, Kopaonik, 23-27.3.1998., pp 309-314.

  
  

  $143.  Povezivanje računarskih aplikacija putem STEP standarda, (koautori Dragan Mišić, Dragan Domazet, Miodrag Manić), YU -Info '98, Kopaonik, 23-27.3.1998., pp 425-430.

  
  

  $144.  Koncept baze podataka o čelicima, čeličnom livu i livenom gvožđu, (koautori Miloš Stojković, Miodrag Manić), YU -Info '98, Kopaonik, 23-27.3.1998., pp 812-816.

  
  

  $145.  Mogućnost korišćenja metoda veštačke inteligencije u procesu rasporeda limenih delova na tabli, (koautori Miodrag Manić, Dragan Mišić, Goran Janevski, Zoran Đurišić), YU -Info '98, Kopaonik, 23-27.3.1998., pp 825-830.

  
  

  $146.  Varijantno konstruisanje familije osnosimetričnih delova u programu AutoCad, (Koautori:Zdravković M., Manić M., Mišić D.), 27. Međunarodno savetovanje proizvodnog mašinstva Jugoslavije, Niš-Niška Banja, septembar 1998.

  
  

  $147.  Sistem za pretraživanje resursa biblioteke Mašinskog fakulteta u Nišu, (koautor Milan Zdravković, YU -Info '99, Kopaonik, 22-26.3.1999.

  
  

  $148.  Specifičnosti troslojnog modela klijent - server arhitekture u Java okruženju, (koautor Milan Zdravković), YU -Info '99, Kopaonik, 22-26.3.1999.

  
  

  $149.  Mogućnosti STEP standarda u predstavljanju modela proizvoda, (koautori Dragan Mišić, Miodrag Manić, Dragan Domazet), YU -Info '99, Kopaonik, 22-26.3.1999.

  
  

  $150.  Uporedna analiza mogućnosti programskih paketa za geometrijsko modeliranje, (koautori Nikola Korunović, Miloš Stojković), YU -Info '99, Kopaonik, 22-26.3.1999.

  
  

  $151.  Parametarsko modeliranje dezena gazećeg sloja automobilskog pneumatika (koautori Miloš Stojković, Nikola Korunović, Milorad Cekić) Jupiter 99, Beograd

  
  

  $152.  Generisanje gabaritnog modela složenih proizvoda za udaljenog klijenta, (koautori Nikola Korunović,  Dragan Domazet,   YU - Info 2000, 27-31.3.2000, Kopaonik

  
  

  $153.  Povezivanje STEP (EXPRESS) modela proizvoda sa ekspertnim sistemima, (koautori Dragan Mišić, Miodrag Manić), YU - Info 2000, 27-31.3.2000, Kopaonik

  
  

  $154.  Razvoj okruženja za realizaciju integrisanog sistema za simultano projektovanje, (koautori Milan Zdravković, Miodrag Manić), YU Info - 2000, 27-31.3.2000, Kopaonik

  
  

  $155.  Platforma za razvoj pneumatika u narednoj dekadi, Uvodni referat, Prvi naučno-stručni skup o pneumaticima, Pneumatici 2000, Vrnjačka banja, 2000.

  
  

  $156.  Mogućnosti određivanja naponsko deformacionog stanja gumenih proizvoda, (koautori Nikola Korunović, Dejan Manić, Prvi naučno-stručni skup o pneumaticima, Pneumatici 2000, Vrnjačka banja, 2000.

  
  

  $157.  Funkcionalna analiza i razvoj virtual classrom Web aplikacije nad J2EE platformom, (koautori Milan Zdravković, Menelaos Ioannidis), YU INFO 2001, 19-23.3.2001., Kopaonik, 2001.

  
  

  $158.  Internet katalog industrijskih proizvoda Jugoslavije -mogućnosti i ograničenja, Simpozijum Internet – Economy – Safety – Security, INNES 2001, Soko Banja, 2001.

  
  

  $159.  Engineering Webtop Internet Service – Building framework for rapid mechanical design by using Internet services, (koautor Milan Zdravković), Proceedings of First National Conference on Recent Advances in Mechanical Engineering Patras, Greece, 17th to 20th September, 2001

  
  

  $160.  FEA model Building for tire analysis, (koautor Nikola Korunović), Proceedings of First National Conference on Recent Advances in Mechanical Engineering Patras, Greece, 17th to 20th September, 2001.

  
  

  $161.  Parametric design of automotive tyre, (koautor Miloš Stojković), Proceedings of First National Conference on Recent Advances in Mechanical Engineering Patras, Greece, 17th to 20th September, 2001.

  
  

  $162.  Gradnja modela pneumatika za analizu metodom konačnih elemenata, (koautor N.Korunović) 28. Jupiter konferencija, Beograd, 2002.

  
  

  $163.  Model pneumatika za statičku analizu metodom konačnih elemenata, (koautor Nikola Korunović), II naučno-stručni skup Pneumatici '02, Beograd, 6-8. novembar 2002.

  
  

  $164.  Mogućnosti korišćenja direktnih proizvodnih tehnologija u industriji pneumatika, II naučno-stručni skup Pneumatici '02, Beograd, 6-8. novembar 2002.

  
  

  $165.   Izrada modela alata za vulkanizaciju pneumatika laminacijom, (koautor Jelena Milovanović), II naučno-stručni skup Pneumatici '02, Beograd, 6-8. novembar 2002.

  
  

  $166.  Mogućnosti upotrebe osnosimetričnih MKE modela pri projektovanju pneumatika, (N.  Korunović, M. Stojković), YU Info 2004, Kopaonik, Zbornik radova CD

  
  

  $167.  Na-znanju-zasnovano projektovanje automobilskog pneumatika, (koautori M. Stojković, M. Manić), PneUMAtici 2004, Beograd, Zbornik radova CD str. 63-75

  
  

  $168.  Mogućnosti upotrebe statičke MKE analize u procesu projektovanja pneumatika, (koaoutori N.Korunović, D.Manić), PneUMAtici 2004, Beograd, Zbornik radova CD str. 1-15

  
  

  $169.  Faktori za uspešnu primenu content management sistema (cms) u elektronskom poslovanju, (koautor M.Zdravković), XIX naučno-stručni skup InfoTech 2004., Vrnjačka Banja, Zbornik radova CD

  
  

  $170.  Ekspertni sistem za odabir metoda 3d skeniranja fizičkih objekata, (koautori M. Manić, D. Mišić, N. Vitković),  YU Info 2005, Kopaonik, Zbornik radova CD

  
  

  $171.  Primena struktuiranog Content Managementa u upravljanju procesima, (koautori M. Zdravković), YU Info 2005, Kopaonik, Zbornik radova CD

  
  

  $172.  Inkorporiranje vizuelnih informacija u bibliotečke zapise, (koautori D. Lilkić, O. Tošić), YU Info 2005, Kopaonik, Zbornik radova CD

  
  

  $173.  Modeliranje gume za potrebe analize pneumatika primenom metoda konačnih elemenata, (N. Korunović, D. Manić, M. Manić), Simpozijum IPG Niška Banja 2005

  
  

  $174.  Optimizacija dimenzija poprečnog preseka članaka prenosne koordinatne merne mašine, (koautor M Trifunović),CD Zbornik radova, Savetovanje proizvodnog mašinstva, 2005

  
  

  $175.  B. Mišić – Ilić, Učenje na daljinu i nastava stranih jezika, Naučni skup “Multidisciplinarnost u nastavi jezika i književnosti”, Univerzitet Crne Gore, Filozofski fakultet u Nikšiću,  2006

  
  

  $176.  M. Trajanović, M. Zdravković, N. Korunović, Problem mobilnosti istraživača u Srbiji, Zbornik radova SNTPI '06 - Sistem naučnih, tehnoloških i poslovnih informacija, Fruška gora, 2006

  
  

  $177.  M. Trajanović, N. Vitković, upotreba tehnika reverzibilnog inženjerstva na primeru kašike varalice, Zbornik radova, YUinfo 2006, Kopaonik, 2006

  
  

  $178.  J. Milovanović, M. Trajanović, M. Stojković, “Prednosti i nedostaci SLM tehnologije na primeru izrade alata za vulkanizaciju pneumatika“, 31. savetovanje proizvodnog mašinstva Srbije i Crne Gore sa mećunarodnim učešćem., Kragujevac, 19-21 septembar 2006, zbornik radova 461-468.

  
  

  $179.  M. Zdravković, M. Trajanović, N. Vitković, Podrška izvršenju manuelnih aktivnosti u orkestraciji servisno-orijentisane arhitekture, Zbornik radova YUinfo 2007, Kopaonik, 2007

  
  

  $180.  M. Zdravković, M. Trajanović, M. Manić, M. Trifunović, Integrisanje poslovnih servisa u malim i srednjim preduzećima proizvodne delatnosti, Zbornik radova YUinfo 2007, Kopaonik, 2007

  
  

  $181.  M. Trajanović, Lj. Radović, Nastava matematike korišćenjem e-learning sistema, Zbornik radova YUinfo 2007, Kopaonik, 2007

  
  

  $182.  Zdravković, M., Trajanović, M.,  “SOA zasnovano okruženje za formiranje lanaca snabdevanja i integrisano upravljanje narudžbinama u mrežama proizvodnih kompetencija”, IWCTQM, Beograd, 2007.

  
  

  $183.  Zdravković, M., Trajanović, M., Vitković, N., 2008, “Korišćenje WSMO za razvoj semantičkih mreža snabdevanja”, YU INFO, Kopaonik, 2008.

  
  

  $184.  Miroslav Trajanović, Miodrag Zdravković, Nikola Korunović, XV Skup Trendovi razvoja: “ Doktorske studije u Srbiji, regionu i EU ”, Kopaonik, 2. –5. 03. 2009.

  
  

  $185.  Miroslav Trajanović, Nikola Vitković, Milan Trifunović, Stojanka Arsić, Novi pristup u generisanju interpolacionih  površina fizičkih objekata, YUINFO 2009, Kopaonik 2009.

  
  

  $186.  Miroslav Trajanovic, Biljana Misic Ilic, Experience in application of distance learning in English language teaching at Metropolitan university, Proceeding of conference Elektronsko učenje na putu znanja, ISBN 978-86-912685-3-4, Belgrade, 2010, pp 61-67 

  
  

  87. Nikola Korunović, Milan Trifunović, Nikola Vitković, Jelena Milovanović, Miroslav Trajanović, Non-linear cord material models in finite element analysis of tires, VIII naučna konferencija PneUMAtici 2014, 12.-13. decembar 2014. Beograd, pp 27-42, ISBN 978-86-84231-34-7