Dodatne informacije

• Lični podaci

• Datum rođenja: 1954
• Mesto rođenja: Vlasina Okruglica, Surdulica, Srbija

• Obrazovanje

• Fakultet: Mašinski fakultet Univerziteta u Beogradu
• Odsek / Grupa / Smer: Doktorska disertacija iz oblasti upravljanja sistemima
• Godina diplomiranja: 1985

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  Antic, D., Nikolic, V., Contribution to the Conversion of Bond Graf Models into State Space Equations and Blok Diagram Simulation Models, Budapest University of Technology and Economics ( BUTE), Budapest, 2002.

• Knjige i udžbenici:

  Николић В., Ћојбашић Ж., Пајовић Д. (1996), "Аутоматско управљање - анализа система", Машински факултет у Нишу, 308 стр., Ниш (универзитетски уџбеник).

  
  

  Николић В., Ћојбашић Ж., Симоновић М. (2008), "Збирка задатака из управљања системима", Машински факултет у Нишу, Ниш (помоћни универзитетски уџбеник).

  
  

  Николић В., Ћојбашић Ж., Ристић-Дуррант Д. (2015), "Аутоматско управљање - анализа система", Ниш.

  
  

  Милованчевић М., Николић B., Петковић Д., (2016), „Инжењерски менаџмент у условима савременог пословања“

  
  

  Стојичић М., Стојичић Б., Николић В. (2017), "Збирка задатака из аутоматског управљања са теоријском основама И примјеном МАТЛАБ-а”. Бања Лука, Ниш

  
  

  Николић В., Ристић-Дуррант Д., Ћојбашић Ж.,Ћирић И., Симоновић М., Кованџић М.,(2020), “Пројектовање система управљања”, Ниш

• Radovi u časopisima sa IMPACT faktorom:

  Категорија М21

  
  

  M. Milovančević, V. Nikolić, D. Petković, Lj. Vračar , E. Veg , N. Tomić, S. Jović, Vibration analyzing in horizontal pumping aggregate by soft computing, MEASUREMENT, ELSEVIER SCI LTD, 125, pp. 454 - 462, 0263-2241, 10.1016/j.measurement.2018.04.100, OXFORD, 2018.

  
  

  V. Nikolić, V. Mitić, Lj. Kocić, D. Petković, Wind speed parameters sensitivity analysis based on fractals and neuro-fuzzy selection technique, Knowledge and Information Systems,  doi:10.1007/s10115-016-1006-0, 2017.

  
  

  D. Marković, D. Petković, V. Nikolić, M. Milovančević, B. Petković, Soft computing prediction of economic growth based in science and technology factors, Physica A: Statistical Mechanics and its Applications,  465, pp. 217 - 220, https://doi.org/10.1016/j.physa.2016.08.034, Jan2017.

  
  

  M. Kovandžić, V. Nikolić, A. Al-Noori, I. Ćirić, M. Simonović, Near Field Acoustic Localization Under Unfavorable Conditions Using Feedforward Neural Network For Processing Time Difference Of Arrival, EXPERT SYSTEMS WITH APPLICATIONS, 71, 1, pp. 138 - 146, 0957-4174, 10.1016/j.eswa.2016.11.030, 2016.

  
  

  M. Milovančević, B. Anđelković, V. Nikolić, Analyses of the most influential factors for vibration monitoring of planetary power transmissions in pellet mills by adaptive neuro-fuzzy technique, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 66-67, 2016, 0888-3270, 10.1016/j.ymssp.2016.05.028, 2016.

  
  

  D. Petković, S. Shamshirband, A. Kamsin, M.  Lee, O.  Aničić, V. Nikolić, Survey of the most influential parameters on the wind farm net present value (NPV) by adaptive neuro-fuzzy approach (Review), RENEWABLE & SUSTAINABLE ENERGY REVIEWS, (2016), vol. 57, pp. 1270-1278, https://doi.org/10.1016/j.rser.2015.12.175, 2016.

  
  

  V. Nikolić, S. Sajjadi, D. Petković, S. Shamshirband, Ž. Ćojbašić, L.Y. Por, Design and state of art of innovative wind turbine systems, Renewable and Sustainable Energy Reviews -https://doi.org/10.1016/j.rser.2016.03.052 , 2016.

  
  

  V. Nikolić, Sh. Motamedi, Sh. Shamshirband, D. Petković, Sudher Ch, M.Arif, Extreme learning machine approach for sensorless wind speed estimation, MECHATRONICS, 0957-4158, 10.1016/j.mechatronics.2015.04.007, 2015.

  
  

  V. Nikolić, D. Petković, P.L Yee, Sh. Shamshirband, M. Zamani, Ž. Ćojbašić, Sh. Motamedi,  Potential of neuro-fuzzy methodology to estimate noise level of wind turbines, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 66-78, pp. 715 - 722, 0888-3270, 10.1016/j.ymssp.2015.03.013, 2015.

  
  

  V. Nikolić, D. Petković, Sh. Shamshirband, Ž. Ćojbašić, Adaptive neuro-fuzzy estimation of diffuser effects on wind turbine performance, ENERGY, 89, pp. 324 - 333, 0360-5442, doi:10.1016/j.energy.2015.05.126, 2015.

  
  

  Sh. Shamshirband, D. Petković, Ž. Ćojbašić, V. Nikolić, N.B.Anuar, N.L.Mohd Shuib, Miss Laiha Mat Kiah, Sh. Akib, Adaptive neuro-fuzzy optimization of wind farm project net profit, ENERGY CONVERSION AND MANAGEMENT, 80, April 2014, pp. 229 - 237, 0196-8904, 10.1016/j.enconman.2014.01.038, 2014.

  
  

  V. Nikolić, Sh. Shamshirband, D. Petković, K. Mohammadi, Ž. Ćojbašić, T.A. Altameem, A. Gani, Wind wake influence estimation on energy production of wind farm by adaptive neuro-fuzzy methodology, ENERGY, 2014, pp. 1 - 11, 0360-5442, 10.1016/j.energy.2014.11.078, 2014.

  
  

  Sh. Shamshirband, D. Petković, A. Amini, N.B.Anuar, V. Nikolić, Ž. Ćojbašić, Miss Laiha Mat Kiah, A. Gani, Support vector regression methodology for wind turbine reaction torque prediction with power-split hydrostatic continuous variable transmission, ENERGY, 67, 2014, pp. 623 - 630, 0360-5442, 10.1016/j.energy.2014.01.111, 2014.

  
  

  Sh. Shamshirband, D. Petković , N.B.Anuar, Miss Laiha Mat Kiah, Sh. Akib, A. Gani Ž. Ćojbašić, V. Nikolić, Sensorless estimation of wind speed by adaptive neuro-fuzzy methodology, INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS, (2014), vol. 62, pp. 490-495, https://doi.org/10.1016/j.ijepes.2014.04.065.

  
  

  Sh. Shamshirband, D. Petković, H. Saboohi, N.B.Anuar, I. Inayat, Sh. Akib, V. Nikolić, Ž. Ćojbašić, Miss Laiha Mat Kiah, A. Gani, Wind turbine power coefficient estimation by soft computing methodologies: comparative study, ENERGY CONVERSION AND MANAGEMENT, 81, 2014, pp. 520 - 526, 0196-8904, 10.1016/j.enconman.2014.02.055, 2014.

  
  

  D. Petković, Sh. Shamshirband, Ž. Ćojbašić, V. Nikolić, N.B.Anuar, Aznul Qalid Md Sabri, Sh. Akib, Adaptive neuro-fuzzy estimation of building augmentation of wind turbine power, COMPUTERS & FLUIDS, 97, 2014, pp. 188 - 194, 0045-7930, 10.1016/j.compfluid.2014.04.016, 2014.

  
  

  T.Altameem, V. Nikolić,  Sh. Shamshirband, D. Petković, H.Javidnia, Miss Laiha Mat Kiah, A.Gani, Potential of support vector regression for optimization of lens system, Computer-Aided Design, https://doi.org/10.1016/j.cad.2014.10.003, 2014.

  
  

  D. Petković, Ž. Ćojbašić, V. Nikolić, Adaptive neuro-fuzzy approach for wind turbine power coefficient estimation, Renewable and Sustainable Energy Reviews, 28, pp. 191 - 195, https://doi.org/10.1016/j.rser.2013.07.049, 2013.

  
  

  I. Pavlović, I. Ćirić, P. Djekić, V. Nikolić, R. Pavlović, Ž. Ćojbasić, G. Radenković, RHEOLOGICAL MODEL OPTIMIZATION USING ADVANCED EVOLUTIONARY COMPUTATION FOR THE ANALYSIS OF THE INFLUENCE OF RECYCLED RUBBER ON RUBBER BLEND DYNAMICAL BEHAVIOUR, Meccanica, 2013, DOI 10.1007/s11012-013-9761-4.

  
  

  D. Petković, Ž. Ćojbašić, V. Nikolić, Sh. Shamshirband, Miss Laiha Mat Kiah, Nor Badrul Anuar, Ainuddin Wahid Abdul Wahab, Adaptive neuro-fuzzy maximal power extraction of wind turbine with continuously variable transmission, ENERGY, 0360-5442, doi 10.1016/j.energy.2013.10.094., 2013.

  
  

  Категорија М22

  
  

   М. Simonović, А. Cvetković, Ј. Manojlović, V. Nikolić, (2020). Outage performance evaluation of device-to-device system with energy harvesting relay. Thermal Science, (00), 196-196. https://doi.org/10.2298/TSCI200410196S

  
  

  V. Nikolić, D. Petković, N. Denic, M. Milovančević, S.Gavrilovic, Appraisal and review of e-learning and ICT systems in teaching process, Physica A: Statistical Mechanics and Its Applications, Vol. 513, 1 2019, pp. 456-464, https://doi.org/10.1016/j.physa.2018.09.003, 2019.

  
  

  V. Nikolić, J. Kaljević, S. Jović, D. Petković, M. Milovančević, Lj. Dimitrov, P.  Dachkinov, Survey of quality models of e-learning systems, Physica A: Statistical Mechanics and Its Applications, 511, 1, 2018, Pages 324-330, https://doi.org/10.1016/j.physa.2018.07.058,2018.

  
  

  V. Nikolić, D. Petković, M. Milovančević, H. Deneva, L. Lazov, E. Teirumenieka, Optimization of Laser Cutting Parameters Using an Adaptive Neuro-fuzzy Methodology, LASERS IN ENGINEERING, (2018), vol. 40 br. 4-6, str. 341-346,

  
  

  V. Vučković, V. Mitić, Lj. Kocić, V. Nikolić, The fractal nature approach in ceramics materials and discrete field simulation, Science of Sintering, DOI: 10.2298/SOS1803371V, 2018.

  
  

  L. Lazov, V. Nikolić, S. Jović, M. Milovančević , H. Deneva , E. Teirumenieka, N. Arsić, Evaluation of laser cutting process with auxiliary gas pressure by soft computing approach, Infrared Physics and Technology, 91, pp. 137 - 141, 1350-4495, 10.1016/j.infrared.2018.04.007, 2018.

  
  

  M. Pavlović, I. Ćirić, D. Ristić-Durrant, V. Nikolić, M. Simonović, M. Ćirić, M. Banić, Advanced thermal camera based system for object detection on rail tracks, Thermal Science, 22, 5, pp. S1551 - S1561, 0354-9836, 10.2298/TSCI18S5551P, 2018.

  
  

  D. Petković, V. Nikolić, V. Mitić, Lj. Kocić, Estimation of fractal representation of wind speed fluctuation by artificial neural network with different training algorithms, Flow Measurement and Instrumentation, DOI: 10.1016/j.flowmeasinst.2017.01.007 , 2017.

  
  

  M. Milovančević, D. Marković, V. Nikolić, I. Mladenović, Determination of the most influential factors for number of patents prediction by adaptive neuro-fuzzy technique, Quality & Quantity, 51, 3, pp. 1207 - 1216, https://doi.org/10.1007/s11135-016-0326-1, 2017.

  
  

  I. Ćirić, Ž. Ćojbašić, D. Ristić-Durant, V. Nikolić, M. Ćirić, M. Simonović, I. Pavlović, Thermal Vision based Intelligent System for Human Detection and Tracking in Mobile Robot Control System, Thermal Science, 5, 20, pp. s1553 - s1559, 0354-9836, 621, 10.2298/TSCI16S5553Ć, 2016.

  
  

  V. Nikolić, D. Petković, L. Lazov, M. Milovančević, Selection of the most influential factors on the water-jet assisted underwater laser process by adaptive neuro-fuzzy technique, Infrared Physics & Technology, DOI: 10.1016/j.infrared.2016.05.021, 2016.

  
  

  D. Petković, V. Nikolić, M. Milovančević, L. Lazov Estimation of the most influential factors on the laser cutting process heat affected zone (HAZ) by adaptive neuro-fuzzy technique, INFRARED PHYSICS & TECHNOLOGY, 1350-4495, 10.1016/j.infrared.2016.05.005, 2016.

  
  

  M. Simonović, V. Nikolić, E. Petrović, I. Ćirić, Heat Load Prediction of Small District Heating System Using Artificial Neural Networks, Thermal Science, 5, 20, pp. s1355 - s1365, 0354-9836,  10.2298/TSCI16S5355S, 2016.

  
  

  Категорија М23

  
  

  M.Milovančević, H. Deneva, L. Lazov Lyubomir, V. Nikolić, D.Petković, Evaluation of Soft Computing Methods for Parameters Estimation and Sensitivity Analysis of Laser Cutting, Lasers in Engineering, Vol. 40, Number 1-3 (2018).

  
  

  A. Miltenović, V. Nikolić, M. Banić, Wear Load Capacity of Crossed Helical Gears With Wheel Made From Sintered Steel, SCIENCE OF SINTERING, INT INST SCIENCE SINTERING (I I S S), 47, pp. 153 - 163, 0350-820X, 669.14; 622.785, 10.2298/SOS1502153M, 2015.

  
  

  M. Milovančević, V. Nikolić, Analysis of the influence of auxiliary gas pressure on cut characteristics of laser cut steel, Lasers in Engineering, vol. 40 N. 4-6, pp. 253-263, ISSN: 0898-1507 (print) ISSN: 1029-029X (online), DOI 10.1007/s00339-017-0859-8, 2017.

  
  

  M. Milovančević, V. Nikolić, N. Pavlović, A. Veg, S. Troha, Vibration Prediction of Pellet Mills Power Transmission by Artificial Neural Network, ASSEMBLY AUTOMATION, 37, 4, pp. 464 - 470, 0144-5154, -1378070-, 2017.

  
  

  D. Turnić, N. Marković, T. Igić, V. Nikolić, M. Spasojević-Šurdilović, Analysis of material non-linearity of steel girders subjected to patch loading, Tehnicki Vjesnik-Technical Gazette,24, 6(2017), pp. 1991 - 1998, 1330-3651, 10,17559/TV-20160524114854, 2017.

  
  

  I. Ćirić, Ž. Ćojbašić, V. Nikolić, T. Igić, B. Turnšek, Intelligent Optimal Control of Thermal Vision-Based Person-Following Robot Platform, Thermal Science, 18, 3, pp. 957 - 966, 2334-7163, 10.2298/TSCI1403957C, 2014.

  
  

  S. Perić, D. Antić, V. Nikolić, D. Mitić, M. Milojković, S. Nikolić, A New Approach to the Sliding Mode Control Design: Anti-lock Braking System as a Case Study, Journal of Electrical Engineering-Elektrotechnicky Casopis, 65, 1, pp. 37 - 43, 1335-3632, 10.2478/jee-2014-0005, 2014.

  
  

  D.Trajković, V. Nikolić, D. Antić, S. Nikolić, S. Perić, Application of the Hybrid Bond Graphs and Orthogonal Rational Filters in Sag Voltage Effect Reduction, Elektronika Ir Elektrotechnika, 19, 6, pp. 25 - 30, 1392-1215, 10.5755/j01.eee.19.6.1746, 2013.

  
  

  A. Miltenović, V. Nikolić, M. Milovančević, M. Banić, Experimental and FEM Analysis of Sintered Steel Worm Gear Wear, Transactions of FAMENA, 36, 4, pp. 85 - 96, 1333-1124, 62-58:536.421.5:620.17, 2013.

  
  

  E. Petrović, V. Nikolić, D. Ristić-Durrant, A. Leu, Stereo-Vision Based Human Tracking for Robotic Follower, International Journal of Advanced Robotic Systems, 10, pp. 191 - 195, 1729-8806, DOI: 10.5772/56124, 2013.

  
  

  A. Miltenović, V. Nikolić, Radivoje Mitrović, Efficiency of Crossed Helical Gears with Wheels made of Sintered Steel Fe1.5Cr0.2Mo with Sinter-Hardening Treatment, Transactions of FAMENA, 36, 2, pp. 31 - 40, 1333-1124, 2012.

  
  

  D. Antić, Z. Jovanović, V. Nikolić, M.Milojković, S. Nikolić, N. Danković, Modeling of Cascade-connected Systems Using Quasi-orthogonal Functions, Elektronika Ir Elektrotechnika, 18, 10, pp. 3 - 8, 1392-1215, 10.5755/j01.eee.18.10.3051, 2012.

  
  

  I. Ćirić, Ž. Ćojbašić, V. Nikolić, P. Živković, M.Tomić, Air quality estimation by computational intelligence methodologies, Thermal Science, pp. 555 - 567, ISSN 0354-9836, DOI:10.2298/TSCI120209186C, 2012.

  
  

  P. Živković, V. Nikolić, Ž. Ćojbašić, G. Ilić, I. Ćirić, Hybrid Soft Computing Control Strategies for Improving the Energy Capture of a Wind Farm, Thermal Science, 16, Suppl. 2, pp. S545 - S554, 0354-9836, doi:10.2298/TSCI120503185Z, 2012.

  
  

  A. Boričić, D. Nikodijević, V. Nikolić, Ž. Stamenković, Parametric method for unsteady two-dimensional MHD boundary-layer on a body for which temperature varies with time, ARCHIVES OF MECHANICS, 63, 1, pp. 57 - 76, 0373-2029, 2011.

  
  

  Ž. Ćojbašić, V. Nikolić,I.Ćirić, Lj. Ćojbašić, Computationally Intelligent Modelling and Control of Fluidized Bed Combustion Process, Thermal Science, 15, 2, pp. 321 - 338, 0354-9836, 539.374/.377:519.62/.63, 10.2298/TSCI101205031Ć, 2011.

  
  

  D. Ristić-Durrant, S. Grigorescu, A. Gräser, Ž. Ćojbašić, V. Nikolić, Robust Stereo-Vision Based 3D Object Reconstruction for the Assistive Robot FRIEND, Advances in Electrical and Computer Engineering, 11, 4, pp. 15 - 22, 1582-7445, 10.4316/AECE.2011.04003, 2011.

• Radovi u ostalim časopisima:

  V. Nikolić, M. Milovančević, D. Petković, D. Jocić, M. Savić, PARAMETERS FORECASTING OF LASER WELDING BY THE ARTIFICIAL INTELLIGENCE TECHNIQUES, FACTA UNIVERSITATIS Series: Mechanical Engineering Vol. 16, No 2, 2018, pp. 193 – 201, https://doi.org/10.22190/FUME180526025N

  
  

  P. Rajković, E. Petrović, V. Nikolić, COMPUTATION OF THE SHORTEST DISTANCE BETWEEN TWO PARAMETRIC DEFINED OBJECTS BY PARTICLE SWARM OPTIMIZATION, Facta Universitatis, Series: Automatic Control and Robotics, 14, 2, pp. 77 - 86, 1820-6417, UDC: (681.58:004.89):681.513.3, 2015.

  
  

  S. Perić, D. Trajković, D. Antić, V. Nikolić, S. Nikolić, M. Milovanović, Fuzzy-PI Control of Water Pumps Modelled by Hybrid Bond Graphs, Facta Universitatis, Series: Automatic Control and Robotics,  1, 14, pp. 29 - 42, 1820-6417, 2015.

  
  

  M. Simonović, V. Nikolić, E. Petrović, Input vector Impact on Short-term heat Load Prediction of Small District Heating System, Facta Universitatis, Series: Automatic Control and Robotics, 15, 2, pp. 95 - 103, 1820-6417, (697.3+004.032.26):004.942, -1040676-, 2016.

  
  

  I. Pavlović, I.Ćirić, R. Pavlović, M. Simonović, V. Nikolić, Viscoelastic Double beam System Stability Analysis using Artificial Neural Networks, Facta Universitatis, Series: Automatic Control and Robotics,  14, 1, pp. 11 - 17, 1820-6417, (531.39+519.87):004.032.26, -1040789-, 2015.

  
  

  M. Mančić, E. Petrović, V. Nikolić, M. Jovanović, P. Rajković, M. Simonović, PARTICLE SWARM OPTIMIZATION OF A HEAT PUMP PHOTOVOLTAIC ENERGY SYSTEM, FACTA UNIVERSITATIS Series: Working and Living Environmental Protection, FACTA UNIVERSITATIS Series: Working and Living Environmental Protection, 13, 3, pp. 165 - 176, 0354-804X (Print), 10.22190/FUWLEP1701101E, 2016.

  
  

  Ž. Ćojbašić, V. Nikolić, E. Petrović, V. Pavlović, M. Tomić, I. Pavlović, I. Ćirić, A real time neural network based finite element analysis of shell structure, FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, UNIV NIS, 12, 2, pp. 149 - 155, 0354-2025, UDC: 519.95:531.2, -1176913-, 2014.

  
  

  D. Marković, D. Petković, V. Nikolić, M. Milovančević, N. Denić, DETERMINATION OF IMPORTANT PARAMETERS FOR PATENT APPLICATIONS, FACTA UNIVERSITATIS Series: Mechanical Engineering, FACTA UNIVERSITATIS Series: Mechanical Engineering, 2335-0164, 10.22190/ FUME170511014M, 2016.

  
  

  E. Petrović, M. Simonović, V. Nikolić, FUZZY CONTROL OF DIFFERENTIAL DRIVE MOBILE ROBOT FOR MOVING TARGET TRACKING, Facta Universitatis, Series: Automatic Control and Robotics, 16, 2, pp. 83 - 93, 1820-6417, UDC (681.58:004.89):681.5.01, 10.22190/FUACR1702083P, 2017.

  
  

  Nikolić V.,Ćojbašić Ž., Ćirić I., Petrović E., (2010.), Intelligent Decision Making in Wastewater Treatment Plant SCADA System, Facta Universitatis – Series Automatic Control and Robotics, Vol.9, No 1, pp. 69 ‐ 77.

  
  

  Ivan Ćirić, Žarko Ćojbašić, Vlastimir Nikolić, Emina Petrović, (2011), Hybrid Fuzzy Control Strategies for Variable Speed Wind Turbines, Facta Universitatis ‐ Series Automatic Control And Robotics, Vol. 10, No 2, pp. 205 ‐ 217

  
  

  Ivan Ćirić, Žarko Ćojbašić, Miša Tomić, Milan Pavlović, Vukašin Pavlović, Ivan Pavlović, Vlastimir Nikolić (2012) Intelligent Control of DaNi Robot Based on Robot Vision and Object Recognition Facta Universitatis, Series: Automatic Control And Robotics, Vol.11, No 2, 2012 pp. 129 – 140

  
  

  Petrović, E., Ćojbašić, Ž., Ristić-Durrant, D., Nikolić, V., Ćirić, I., & Matić, S. (2013). Kalman Filter and Narx Neural Network for Robot Vision Based Human Tracking. Facta Universitatis, Series: Automatic Control And Robotics, Vol. 12, No 1, pp. 43-51.

  
  

  Antić, D., Nikolić, V., Mihajlov, M., Aleksić, K., "Sliding Mode Control with Fuzzy Tuning for Position Tracking of an Electro-Hydraulic Actuator", Machine Dynamics Problems, Vol 26, No. 1, 2002, (pp. 81-93).

  
  

  Mihajlov, M., Nikolić, V., Antić,  D., "Position Control of an Electro-Hydraulic Servo System Using Slindig Mode Control Enhanced by Fuzzy PI Controller", Facta Universitatis, Series:  Mechanical Engineering, Vol 1, No 9, 2002, (pp. 1217-1230).

  
  

  Nikolić, V., Antić, D., Trajković, D., Vidojković, B., "Modelling and Simulation of the Self-Excited Stick-Slip System Using Bondsim Tools", Facta Universitatis, Series:  Mechanical Engineering, Vol 2, No 1, 2004, (pp. 49-58).

  
  

  Trajković, D., Nikolić, V., Antić, D., Danković, B., "Analyzing, Modeling and Simulation of the Cascade Connected Transporters in Tire Industry Using Signal and Bond Graphs", Machine Dynamics Problems, Vol 29, No. 3, 2005, (pp. 91-106).   

  
  

  Nikolić V., Ćojbašić Ž., Pajović D., Proposal for an algorithm for increasing the accuracy of an optimal estimation of the generalized Kalman discrete filter for non-linear systems, Teorijska i primenjena mehanika, br. 19, str.  99-106, Beograd, 1993.

  
  

  Nikolić V., Ćojbašić Ž., Design of the proportional-integral regulator in the state space for controlling the number of rotations of a steam turbine, Facta Universitatis - Series Mechanical Engineering, Vol. 1, No. 1, pp. 117-129, Niš, 1994.

  
  

  Nikolić V., Ćojbašić Ž., Design of the PI controller in the state space for controlling rotation speed of a steam turbine, Machine Dynamics Problems, Vol. 10, pp. 65-76, 1995., Poland.

  
  

  Majević M., Nikolić V., Stability of automatic control system with combined pulse-width-time modulation and object with complex parameters, Facta Universitatis - Series Mechanical Engineering, Vol. 1, No. 3, pp. 371-378, Niš, 1996.

  
  

  Nikolić V., Ćojbašić Ž., Pajović D., Choice of the optimal control for the stochastic mechanical system with the two structures by applying inverse and direct algorithm of the continious-discrete dynamic programming, Machine Dynamics Problems, Vol 11, pp. 37-45, 1996., Poland.

  
  

  Nikolić V., Stefanović A., Choice of the optimal value of the mass inertia moment on the stepping motor shaft in the automatic control stochastic system according to the various performance indices, Bulletins for Applied Mathematics, 49-55, 1991., Budapest, Hungaria

  
  

  Николић В., Никодијевић Д., Живковић Д., Оптималнаја оценка концентрации и уровња жидкости в параболическом баке с два канала измеренија и учетом возмушченија в каналах измеренија, Bulletins for Applied Mathematics, pp. 147-157, 1989., Budapest, Hungaria

  
  

  Николић В., Петрушић З., Пројектирование регуљатора состојанија с набљудателем пониженного порјадка дља дискретнују модел шахтового лифта, Bulletins for Applied Mathematics, pp. 175-185, 1989., Budapest, Hungaria

  
  

  Majević M., Nikolić V., Stability of double-measured automatic control system with combined pulse-width-time modulation and unstable object, Bulletins for Applied Mathematics, pp. 235-244, 1994., Budapest, Hungaria

  
  

  Stefanović A., Nikodijević D., Nikolić V., Milenković D., Abgasdruck wie wertmesseinheit der motorleistung, Bulletins for Applied Mathematics", pp. 135-140, 1994., Budapest, Hungaria

  
  

  Nikolić V., Pajović D., Ćojbašić Ž., Adaptive algorithm of state estimation for non-linear discrete systems with respect to the conditionally taken average value, Bulletins for Applied Mathematics, pp. 227-234, 1994., Budapest, Hungaria

  
  

  Nikolić V., Ćojbašić Ž., Pajović D., Choice of the optimal control with the stochastic system with the random structure by applying inverse and direct algorithm of the continious-discrete dynamic programming, Bulletins for Applied Mathematics, pp. 223-232, 1994., Budapest, Hungaria

  
  

  Nikolić V., Ćojbašić Ž., Design of the automatic control system by the number of rotations of a steam turbine in the state space, Bulletins for Applied Mathematics, pp. 237-246, 1995., Budapest, Hungaria

  
  

  Majević M., Nikolić V., Influence of axial acceleration of a slow rotating missile upon the poles' arrangement of its transfer function, Bulletins for Applied Mathematics, pp. 247-258, 1995., Budapest, Hungaria

  
  

  Nikolić V., Ćojbašić Ž., Investigation of The Influence of Defuzzification Method Choice on Fuzzy PD Controller Characteristics, Bulletins for Applied Mathematics, pp. 133-142, 1996., Budapest, Hungaria

  
  

  Nikolić V., Pajović D., Ćojbašić Ž., Polynomial solution of the LQG optimal regulation problem for a pneumatic system, Bulletins for Applied Mathematics, pp. 56-64, 1996., Budapest, Hungaria

  
  

  Nikolić V., Ćojbašić Ž., Experiments with use of fuzzy logic in problems of noise filtration in control systems, Bulletins for Applied Mathematics, pp. 49-57, 1996., Budapest, Hungaria

  
  

  Majević M., Nikolić V., Stability of automatic control system with combined pulse-width-time modulation and object complex parameters, PAMM, Balatonalmadi, Hungaria, 1996. (rad je štampan i u časopisu "Bulletins for Applied Mathematics", pp. 143-152, 1996., Budapest, Hungaria

  
  

  Nikolić V., Aleksić K., Feedback linearization strategies for nonlinear process control, Bulletins for Applied Mathematics, pp. 118-131, Budapest, Hungary, 1999.

  
  

  Nestorović T., Nikolić V., Digital Tracking System Design for the Hydraulic Positioning of the Fourth Order, Teorijska i primenjena mehanika pp. 102-110, Novi Sad, 2000.

  
  

  Nikolić V., Ristić D., Polynomial dual-criterion LQG optimal controller and application to single-screw extruder, Bulletins for Applied Mathematics,  pp. 106-114, Budapest, Hungary, 2000.

  
  

    Nikolić V., Aleksić K., Stanojević N., Design of the digital control low for the one gear train system, PAMM, Bulletins for Applied Mathematics pp. 84-91 , Budapest , Hungary, 1999.

  
  

  Nikolić V., Aleksić K., Some consideration of sliding mode control using the example of pendulum, PAMM, Bulletins for Applied Mathematics pp. 41-48, Budapest, Hungary, 2000.

  
  

  Ćojbašić Ž., Nikolić V., Intelligent Hybrid Fuzzy Impedance Approaches for Robot Compliant Motion Control, Bulletins for Applied Mathematics pp.92-99, Budapest, Hungary, 2001.

  
  

  Ćojbašić Ž., Nikolić V., Ćojbašić Lj., Neuro-Fuzzy Modeling of Sulphur-Dioxide Emission in Fluidized Bed Combustion Process, Bulletins for Applied Mathematics pp.102- 108, Budapest, Hungary, 2001

  
  

  Ćojbašić Ž., Nikolić V. (2002), Computational Intelligence Filtering Approach for Communications and Control, Journal of Automatic Control, Vol XI (2), pp. 73-81

  
  

  Ćojbašić Ž., Nikolić V. (2002), Neuro-Fuzzy Environment Classification for Intelligent Robot Compliant Motion Control, Bulletins for Applied & Computer Mathematics, Budapest, Hungary, BAM-2024/2002(C), pp. 403-412.

  
  

  Nikolić V., Ćojbašić Ž., Milojković A. (2002), Fuzzy Adaptive Filtering Approach for Communications and Control, Bulletins for Applied & Computer Mathematics, Budapest, Hungary, BAM-2025/2002(C), pp. 413-420

  
  

  Ćojbašić Ž., Nikolić V., Ćojbašić Lj. (2003), Flue gas emission reduction in FBC process by fuzzy modeling andintelligent control, Bulletins for Applied & Computer Mathematics, Budapest, Hungary, BAM-2076 B (CIV)/2003-No. 2157, pp. 625-636.

  
  

  Nikolić V., Aleksić K, Ćojbašić Ž., (2004), Application  of classical PI  and fuzzy incremental PI controller of  the multizone crystal growth furnace, Scientific proceedings of the scientific-technical union of mechanical engineering, Mechanica engineering & Electronics, Year XI, Vol. 5/73, Septembar 2004, p.p 29-32, , Varna, Bulgaria.

  
  

  Nikolić V., Aleksić K., Identification and Control of Multizone Furnace; Bulletins for Applied & Computer Mathematics; BAM 2076; No 2158; (2003); 637 - 646;

  
  

  Antić D., Stanković L., Nikolić V., Obtaining State Space Model from Bond Graph Model with Derivative Causality Using Laplace Transform, Machine Dynamics Problems 2003, Vol. 27, No 2 pp. 5-14

  
  

  Manić M., Tanikić D., Nikolić V., Determination of the Cutting Forces in a Face Milling Operation Using the Artificial Neural Networks, Machine Dynamics Problems 2005, Vol. 29, No 3 pp. 51-59

• Radovi na naučnim skupovima međunarodnog značaja:

  V. Nikolić, D. Antić, Ž. Ćojbašić, I. Ćirić, S. Nikolić, S. Perić, Evolutionary Computation in Hybrid Aeroturbine Fuzzy Control, Proceedings of XI International SAUM Conference, Niš, Serbia, 2012, pp.176 – 184, invited paper (M31)

  
  

  V. Nikolić, I. Ćirić, Real Coded Genetic Optimization Of Variable Speed Aero Turbine Fuzzy Controller, Proceedings of 2nd International Conference CPMMI 2012, Contemporary Problems Of Mathematics, Mechanics And Informatics, Novi Pazar, Serbia,2012, invited paper (M31)

  
  

  Petrović E., Tomić M., Nikolić V., Ćojbašić Ž., Pavlović V., Ćirić I., (2013), Human Tracking With a Person Following Robot Based on Extended Kalman Filter, 2nd International Conference (Mechanical Engineering in the 21st century), Niš, Serbia. (M33)

  
  

  I. Ćirić, Ž. Ćojbašić, V. Nikolić, P. Živković, D. Petković, M. Tomić, M. Tomić Thermal Vision Integration in Mobile Robot Vision System, 11 International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banjaluka,BiH (2013) (M33)

  
  

  I. Ćirić, Ž. Ćojbašić, M. Tomić, M. Pavlović, V. Pavlović, Computationally Intelligent Object Recognition for DaNI Robot Vision, Proceedings of XI International SAUM Conference, Niš, Serbia, 2012, pp.132 – 135, (M33)

  
  

  Ž. Ćojbašić, V. Nikolić, D. Ristić‐Durant, I. Ćirić, E. Petrović, S. Matić, Neural Networks Based Human Tracking for Robot Vision, Proceedings of XI International SAUM Conference, Niš, Serbia, 2012, pp.164 – 167, (M33)

  
  

  I. Ćirić, Ž. Ćojbašić, V. Nikolić, E. Petrović, J. Milisavljević, S. Nikolić, Variable Speed Wind Generator Aero Turbine Optimal Fuzzy Control, Proceedings of 29th DANUBIA‐ADRIA Symposium on Advances in Experimental Mechanics, Belgrade, Serbia, 2012., pp. 214‐ 217 (M33)

  
  

  V. Nikolić, Ž. Ćojbašić, D. Ristić‐Durant, E. Petrović, S. Matić, I. Ćirić, Kalman Filter For Robot Vision‐Based Human Tracking, Proceedings of 29th DANUBIA‐ADRIA Symposium on Advances in Experimental Mechanics, Belgrade, Serbia, 2012., pp. 178‐181 (M33)

  
  

  Žarko Ćojbašić Vlastimir Nikolić, Ivan Ćirić, Fuzzy‐genetic robust fluidized bed combustion control, Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems ECOS 2011., Serbia, 2011., pp. 1837‐1842, (M33)

  
  

  Nikolić V., Ćojbašić Ž., Rajković P., Ćirić I., Petrović E., Advanced PID Controller Design for Continuously Variable Transmission, Proceedings of IRMES 2011, Zlatibor,Serbia, pp.157‐162. (M33)

  
  

  Nikolić V., Ćojbašić Ž., Ćirić I., Petrović E., Fuzzy Logic for Decision Making in the SCADA System of the Wastewater Treatment Plant, Proceedings of SAUM 2010, Nis, Serbia, pp.232‐235. (M33)

  
  

  Nikolić V., Ćojbašić Ž., Ćirić I., Petrović E., Intelligent Decision Making in the System of Remote Control and Monitoring of the Wastewater Treatment Plant, Proceedings of Mechanical Engineering In The 21st Century, 2010., Niš, Serbia, pp. 255‐259. (M33)

  
  

  Ćirić I., Ćojbašić Ž., Nikolić V.. Real Coding Genetic Optimization for Modeling and Control of Combustion Process, Proceedings of Automatics and Informatics'10, Sofia, Bulgaria. (M33)

  
  

  Nikolić V., Ćojbašić Ž., Ćirić I., Modelling and Simulation of a Bistable Electromagnetic Hydraulic Valve Actuator for Control, Proceedings of PES 2007, Niš, Serbia, pp. 141‐142. (M33)

  
  

  Nikolić V., Ćojbašić Ž., Ćirić I., Pavlović I., Advanced Control Concept for the Remote Heating System of Niš, Proceedings of SAUM 2007, Nis, Serbia, pp.45‐49. (M33)

  
  

  Nikolić V., Risitć D., Polynomial equation approach to the optimal control problems: H2 optimal control, VIII International SAUM 2004 Conference, Belgrade, pp. 72-79

  
  

  Nikolić V., Ristić D., Nestorović T., Comparative Analysis of Fixed Polynomial  H¥  and Adaptive Minimum Variance Self-Tuning Controller for a Single-Screw Extruder, VII International SAUM Conference on Systems,  Automatic Control and Measurement, Proceedings of the conference, Vrnjačka Banja, pp. 20-27,  September, 2001

  
  

  Nikolić V., The choice of the optimal control according to the general optimality criterion at discrete systems with random influences when there are several measuring channels, Second International Seminar and Symposium: "Automation and Robot", pp. 168-182, Belgrade, 1978.

  
  

  Nikolić V., Stokić D., Nikodijević D., The synthesis of the optimal linear regulator for the internal combustion and gas turbine feeding engine in which load an accidental parameter, 15. KONES, pp. 270-279, Wroclav, Poland, 1989.

  
  

  Nikolić V., Nikodijević D., Petrušić Z., Adaptive algorithm for optimal scalar estimation of the state vector components for the discrete model of the mine elevator, 10th International Conference on Automation in Mine Control (ICAMC), pp. 359-365, Ostrava, Czechoslovakia, 1990.

  
  

  Stefanović A., Nikodijević D., Nikolić V., Bestimmung der max. korrrektionmasse von der durch bohren verbessernden motordrehteile, XVI KONES, pp. 371-376, Gdansk, Poland, 1990.

  
  

  Petrušić Z., Nikolić V., The microprocessor distance controler between moving objects, 10th International Conference on Automation in Mine Control (ICAMC), pp. 365-370, Ostrava, Czechoslovakia, 1990.

  
  

  Nikolić V., Nikodijević D., Stefanović A., The synthesis of the regulator for the gas turbine feeding engine with exogenous variables, XVI KONES, pp. 244-253, Gdansk, Poland, 1990.

  
  

  Nikolić V., Pajović D., Design of LQG optimal controller for the model of vehicle vibration, Naučna konferencija s meždunarodno učastie, Sbornik dokladi, II tom, pp. 85-89, Gabrovo, Bulgaria, 1995.

  
  

  Nikolić V., Avramović A., Stajić Z., Projecting of a corrector on the basis of the reduced order observer for a multivariable mechanical system, 9th International Symposium of Theoretical Electrical Engineering (ISTET '97), Palermo, Italy, 1997.

  
  

  Antić, D., Vidojković, B., Nikolić, V., "Obtaining the Bondsim Simulation Model from Bond Graph Models with Derivative Causality", Proc. 7th Symposium on Theoretical and Applied Mechanics,  28-30. September,  2000, Struga, (pp. 257-228).

  
  

  Antić, D., Nikolić, V., Mihajlov, M., Aleksić, K., "Sliding Mode Control with Fuzzy Tuning for Position Tracking of an Electro-Hydraulic Actuator", SAUM '01, Proc. of the VII International SAUM Conference on Systems Automatic Control and Measurements, 26-28. September 2001, Vrnjačka Banja, (pp. 41-46).

  
  

  Nikolić V., Ristić D., Design of the Optimal Controller Based on the Polynomial System Model, 7th Mini Conference on Vehicle System Dynamics, Identification and Anomalies VSDIA 2000,  Proceedings, Budapest University of Technology and Economics, Faculty of Transportation Engineering, Budapest, Hungary, 6-8 November, 2000.

  
  

  Nikolić V., Ristić D., Solution of H2  optimal control problem based on the polynomial system model, XVI International Conference on "Material Flow, Machines and Devices in Industry", Proceedings, pp. 5.11-5.15, Belgrade, Yugoslavia, Dec. 7.-8. 2000.

  
  

  Nestorović T., Nikolić V., Digital Control System Design for the Two-Pendulum-on-a-Cart Mechanism, Proceedings of the VIII International Conference on the Theory of Machines and Mechanisms, pp. 507-512, Liberec, Czech Republic, 5-7. septembar 2000.

  
  

  Nikolić V., Nestorović T., Discrete-time Contorol System Design for  Reference Input Tracking
  Based on a Fourth-order Vehicle Model, XVI International Conference on "MATERIAL FLOW, MACHINES AND DEVICES IN INDUSTRY", Proceedings, Faculty of Mechanical Engineering, Belgrade, 7-8. decembar 2000.

  
  

  Nikolić V., Nestorović T., Design of Digital Tracking System and Self-Tuning Regulator for a Fourth-Order Vehicle Model, 7th Mini Conference on Vehicle System Dynamics, Identification and Anomalies VSDIA 2000, Proceedings, Faculty of Transportation Engineering, Technical University of Budapest, 6-8 November 2000.

  
  

  Nikolić V., Aleksić K., Sliding mode observers for fault detection and theirs application to a inverted pendulum with cart, 7th Mini Conference on Vehicle System Dynamics, Identification and Anomalies VSDIA 2000,  Proceedings, Budapest University of Technology and Economics, Faculty of Transportation Engineering, Budapest, Hungary, 6-8 November, 2000

  
  

  Nikolić V., Aleksić K., Feedback-linearization control of elevator using estimated car accaleration, XVI International Conference on "Material Flow, Machines and Devices in Industry", Proceedings, Belgrade, Yugoslavia, Dec. 7.-8. 2000.

  
  

  Nikolić V., Nestorović T., Ristić D., Design of robust controllers for a single-screw extruder, 5th Magdeburg Days of Mechanical Engineering, Methods and Processes of Development in Mechanical Engineering, Otto-von-Guericke Universität Magdeburg, Fakultät für Maschinenbau, Proceedings of the conference, 19.-20. September 2001

  
  

  Ćojbašić Ž., Nikolić V., An Approach to Neuro-Fuzzy Filtering for Communications and Control, IEEE Conference Telsiks ‘2001, Niš, 2001.

  
  

  Ćojbašić Ž., Nikolić V., Ćojbašić Lj., Soft Computing Modeling Approach for SO2 Emission Reduction in FBC Process, VII International SAUM ‘2001 Conference,Vrnjačka Banja, pp. 34-40,  2001

  
  

  Antić D., Nikolić V., Mihajlov M. and K. Aleksić, Sliding Mode Control with Fuzzy Tuning for Position Tracking of an Electro-Hydraulic Actuator, VII International SAUM Conference, Vrnjačka Banja pp 52-57. , 2001

  
  

  Ćojbašić Ž., Nikolić V., Šurdilović D. (2002), Intelligent Robot Compliant Motion Control with Neuro-Fuzzy Classification of Environment, XXXVII IEEE International Scientific Conference on Information, Communication and Energy Systems and Technologies ICEST 2002, Niš, pp. 269-272

  
  

  Nikolić V., Ristić D., Ćojbašić Ž. (2002), Design of the Polynomial H2 Regulator With Two-Degrees-of-Freedom, VSDIA 2002 Conference, Budapest, Hungary.

  
  

  Ćojbašić Ž., Nikolić V., Simonović M. (2004), Neural networks based state space control for a high power steam turbine, CONTI ‘2004 Conference, Romania, p.p. 73-77

  
  

  Nikolić V., Ćojbašić Ž., Aleksić K. (2004), Comparation of classical and fuzzy temperature control approaches for the multizone crystal growth furnace, CONTI ‘2004 Conference, Romania, p.p 15-19

  
  

  Ćojbašić Ž., Nikolić V. (2004), Transparent neuro-fuzzy-genetic modeling and control of a complex combustion process, 49. Internationales wissenschaftliches Kolloquium IWK 2004, Ilmenau, Germany.

  
  

  Ćojbašić Ž., Nikolić V., Simonović M. (2004), Adaptive state space turbine neurocontrol, VIII International SAUM ‘2004 Conference, Belgrade, p.p. 258-262

  
  

  Nikolić V., Ćojbašić Ž., Aleksić K. (2004), Two different approaches for a thermal process control, VIII International SAUM ‘2004 Conference, Belgrade, p.p. 292-296 Aleksic K., Durrant M., Werner H., Nikolic V. Robust H2 Controller Design for VSC-HVDC Transmission, CONTI  2006 Conference, Romania, pp. 31-35

  
  

  Nikolić V., Ćojbašić Ž., Aleksić K. Conventional and intelligent temperature control comparison for the multizone crzstal growth furnace, Heavy Machinery, June 2005, Mataruška Banja, p.p. 186-190

• Radovi na domaćim naučnim skupovima:

  Nikolić V., Ćojbašić Ž., Ćirić I. (2006), Dinamička analiza ponašanja aktuatora elektromagnetnog bistabilnog ventila, 30 naučno‐stručni skup sa međunarodnim učešćem HIPNEF 2006, Vrnjačka Banja, Serbia, Proceedings, pp. 240‐245 (M63)

  
  

  Nikolić V., Ćojbašić Ž., Ćirić I., Pavlović I. (2007), Savremeni koncepti upravljanja dislociranim objektima komunalnih sistema, Vodovod i kanalizacija 2007, Tara, Srbija, Zbornik radova. (M63)

  
  

  Ćojbašić Ž., Nikolić V., Ćirić I. (2007), Supervizijsko upravljanje složenim termičkim procesima, 13. Simpozijum termičara Srbije, Sokobanja, Srbija, Zbornik radova na CD‐u, VII‐4. (M63)

  
  

  Nikolić V., Ćojbašić Ž., Ćirić I., (2008) Energetski efikasno upravljanje komunalnim sistemima, SUSTAIN 2008, Niš, Srbija, Zbornik radova, pp. 93‐98 (M63)

  
  

  Ćojbašić Ž., Nikolić V., Ćirić I., Ćojbašić Lj., (2008) Inteligentni sistemi u smanjenju emisije štetnih gasova sa efektom staklene bašte, SUSTAIN 2008, Niš, Srbija, Zbornik radova, pp. 119‐124 (M63)

  
  

  Ćojbašić Ž., Antić D., Nikolić V., Ćirić I., Ćojbašić Lj., (2008) Fazi modeliranje i upravljanje jednog hidrauličkog sistema, 31 naučno‐stručni skup sa međunarodnim učešćem HIPNEF 2008, Vrnjačka banja, Srbija, Zbornik radova, pp. 371‐376 (M63)

  
  

  Nikolić V., Ćojbašić Ž., Pavlović I., Ćirić I. (2008), Inteligentno daljinsko upravljanje sistemima za vodosnabdevanje i tretman otpadnih voda, 31 naučno‐stručni skup sa međunarodnim učešćem HIPNEF 2008, Vrnjačka banja, Srbija, Zbornik radova, pp. 455‐ 460 (M63)

  
  

  Nikolić V., Ćojbašić Ž., Ćirić I., Petrović E.,(2010), Energetski efikasan fazi sistem daljinskog nadzora postrojenja za tretman otpadnih voda, SUSTAIN 2010, Niš, Serbia, pp. 256‐261 (M63)

  
  

  Žarko Ćojbašić, Danijela Ristić-Durrant, Ivan Ćirić, Sorin M. Grigorescu, Axel Gräser, Vlastimir Nikolić (2013) Reliable Computationally Intelligent Object Recognition and Human Tracking in Robotic Vision, Zbornik 57. konferencije ETRAN, Zlatibor, 3-6. juna 2013, str. RO3.6.1-5 (M63)