Dodatne informacije

• Lični podaci

• Datum rođenja: 11.02.1974.
• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Mašinski fakultet u Nišu
• Odsek / Grupa / Smer: Transportna tehnika i logistika
• Godina diplomiranja: 2000

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  Marinković Z., Petrović G., Marinković D., (2007), “Simulation model for the analytical load determination of machine elements“, MACHINE DESIGN - monograph, ISBN 978-86-7892-038-7, The editor of the monograph Kuzmnović S., University of Novi Sad – Faculty of Tehnical Sciences, ADEKO, Novi Sad, pp. 389 – 394.

• Knjige i udžbenici:

  Petrović G., Marković D., Rajković P., (2023), "Kvantitativna logistika - metode i modeli optimizacije", univerzitetski udžbenik, Univerzitet u Nišu Mašinski fakultet u Nišu, ISBN 978-86-6055-167-4;

  
  

  Petrović G., i drugi, (2019), "Održivi, inteligentni i ekološki transport i logistika u urbanom kontekstu - praktikum modula SIETLU",  pomoćni univerzitetski udžbenik, Univerzitet u Nišu Mašinski fakultet u Nišu, ISBN 978-86-6055-122-3.

  
  

  Petrović G., Milić P., Madić M., (2018), "Kvantitativna logistika - verovatnoća, statistika i slučajni procesi sa primenama", univerzitetski udžbenik, Univerzitet u Nišu Mašinski fakultet u Nišu, ISBN 978-86-6055-106-3;

• Radovi u časopisima sa IMPACT faktorom:

  Petrović G., Mihajlović J., Marković D., Hashemkhani Zolfani S., Madić M., (2023), „Comparison of aggregation operators in the group decision-making process: a real case study of location selection problem“, Sustainability, 15(10):8229, doi.org/10.3390/su15108229, link.

  
  

  Madić M., Petrović G., Petković D., Antucheviciene J., Marinković D., (2022), „Application of a robust decision-making rule for comprehensive assessment of laser cutting conditions and performance“, Machines, 10(2):2075-1702, doi.org/10.3390/machines10020153, link.

  
  

  Petrović G., Pavlović J., Madić M., Marinković D., (2022), „Optimal synthesis of loader drive mechanisms: a group robust decision-making rule generation approach“, Machines, 10(5):2075-1702, doi.org/10.3390/machines10050329, link.

  
  

  Stanković A., Petrović G., Marković D., Ćojbašić Ž., (2022), „Solving flexible job shop scheduling problem with transportation time based on neuro - fuzzy suggested metaheuristics“, Acta Polytechnica Hungarica, 19(4):209 - 227, DOI: 10.12700/APH.19.4.2022.4.11, link.

  
  

  Marković D., Petrović G., Ćojbašić Ž., Stanković A., (2020), „The vehicle routing problem with stochastic demands in an urban area –a case study“, Facta Universitatis, Series: Mechanical Engineering, 18(1):107–120, doi.org/10.22190/FUME190318021M, link.

  
  

  Luković A., Petrović G., Janković Ž., Glišović S., (2019), „A model for reduction of transport-related CO2 emissions by optimizing industrial waste treatment facility location“, Thermal Science, 23(3) Part B):1957-1967, doi.org/10.2298/TSCI180206309L, link.

  
  

  Marković D., Petrović G., Ćojbašić Ž., Marinković D, (2019), „A metaheuristic approach to the waste collection vehicle routing problem with stochastic demands and travel times“, Acta Polytechnica Hungarica, 16(7):45-60, DOI: 10.12700/APH.16.7.2019.7.3, link.

  
  

  Petrović G., Madić M., Antucheviciene J., (2018), "An approach for robust decision making rule generation: Solving transport and logistics decision making problems", Expert Systems with Applications, 106: 263-276, doi.org/10.1016/j.eswa.2018.03.065, link.

  
  

  Petrović G., Madić M., Marković D., Milić P., Stefanović G., (2016), ”Multiple criteria decision making of alternative fuels for waste collection vehicles in southeast region of Serbia”, Thermal Science, 20(supp5): S1585-S1598, DOI:10.2298/TSCI16S5585P, link;

  
  

  Jovanović M., Milenković D., Petrović G., Milić P., Milanović S., (2012), ”Theoretical and experimental analysis of dynamic processes of pipe branch for supply water to the Pelton turbine”, Thermal Science, 16(supp2): S617 – S629;

  
  

  Marković D., Petrović G., Ćojbašić Ž., Marinković D., (2012), ”A comparative analysis of metaheuristic maintenance optimization of refuse collection vehicles using the Taguchi experimental design”, Transactions of Famena, 36(4): 25 – 38;

  
  

  Marinković Z., Marinković D., Petrović G., Milić P., (2012), ”Modeling and simulation of dynamic behavior of electric motor driven mechanisms”, Technical Gazette, 19(4): 717 – 725;

  
  

  Marković D., Madić M., Petrović G., (2012), “Assessing the performance of improved harmony search algorithm (IHSA) for the optimization of unconstrained functions using Taguchi experimental design”, Scientific Research and Essays, 7(12): 1312 – 1318;

  
  

  Petrović G., Ćojbašić Ž., Marinković D., (2011), “Optimal preventive maintenance of refuse collection vehicles using probabilistic and computational intelligence approach”, Scientific Research and Essays, 6(16): 3485 – 3497;

  
  

  Petrović G., Marinković Z., Marinković D., (2011), “Optimal preventive maintenance model of complex degraded systems: A real life case stydy”, Journal of Scientific and Industrial Research, 70(6): 412 – 420;

• Radovi u ostalim časopisima:

  Mihajlović J., Petrović G., Ćirić D., Madić M., (2021), „The material selection of the heating plates used in the vulcanization process obtained using different MCDM methods“, Journal of Advanced technologies and materials, 46(1):19 - 25, DOI: 10.24867/ATM-2021-1-004, link.

  
  

  Simić N., Stefanović M., Petrović G., Stanković A., (2021), „Use of the risk analysis approach in the Serbian army integration process against Covid-19“, Operational Research in Engineering Sciences: Theory and Applications - ORESTA, 4(1):67 - 81, doi.org/10.31181/oresta2040127s, link.

  
  

  Stanković A., Petrović G., Marković D., Ćojbašić Ž., Simić N., (2020), „Metaheuristički algoritmi za rešavanje fleksibilnog problema raspoređivanje radnih mesta“, IMK-14 – Istraživanje i razvoj u teškoj mašinogradnji, 26(2):SR49-56, doi: 10.5937/IMK2002049S, link.

  
  

  Stanković A., Petrović G., Ćojbašić Ž., Marković D., (2020), „An application of metaheuristic optimization algorithms for solving the flexible job-shop scheduling problem“, Operational Research in Engineering Sciences: Theory and Applications – ORESTA, 3(3):13 – 28, oi.org/10.31181/oresta20303013s, link.

  
  

  Stanković A., Marković D., Petrović G., Ćojbašić Ž., (2020), „Metaheuristics for the waste collection vehicle routing problem in urban areas“, Facta Universitatis, Series: Working and Living Environmental Protection, 17(1):01-16, doi.org/10.22190/FUWLEP2001001S, link.

  
  

  Mihajlović J., Rajković P., Petrović G., Ćirić D., (2019), „The selection of the logistics distribution fruit center location based on MCDM methodology in Southern and Easter Region in Serbia“, Operational Research in Engineering Sciences: Theory and Applications – ORESTA, 2(2):72-85, doi.org/10.31181/oresta190247m, link.

  
  

  Petrović G., Mihajlović J., Ćojbašić Ž., Madić M., Marinković D., (2019), „Comparasion of three fuzzy MCDM methods for solving the supplier selection problem“, Facta Universitatis, Series: Mechanical Engineering, 17(3):455-469, doi.org/10.22190/FUME190420039P, link.

  
  

  Janošević D., Pavlović J., Jovanović V., Petrović G., (2018), "A numerical and experimental analysis of the dynamic stability of hydraulic excavators", FACTA UNIVERSITATIS, Series Mechanical Engineering, 16(2): 157 - 170, https://doi.org/10.22190/FUME180404015J;

  
  

  Petrović G., Sekulić V., Madić M., Mihajlović J., (2018), "A study of multi criteria decision making for selecting suppliers of linear motion guide", FACTA UNIVERSITATIS, Series: Economics and Organization, 15(2): 97-110, https://doi.org/10.22190/FUEO1802097P.

  
  

  Madić M., Petrović G., (2016), ”Application of the Oreste method for solving decision making problems in transportation and logistics”, SCIENTIFIC BULLETIN Series D: Mechanical Engineering, ISSN 1454-2358, 78(4): 83 – 94;

  
  

  Marinković D., Marinković Z., Petrović G., (2012), “On efficiency of a single-layer shell element for composite laminated structures”, The Scentific journal FACTA UNIVERZITATIS, Series Mechanical Engineering, 10(2): 105 – 112.

  
  

  Jovanović M., Radoičić G., Petrović G., Marković D., (2011), “Dynamical models quality of truss supporting structures”, The Scentific journal FACTA UNIVERZITATIS, Series Mechanical Engineering, 9(2): 137 – 148.

  
  

  Marinković D., Marinković Z., Petrović G., (2011), ”Mass-spring Systems for Geometrically Nonlinear Dyinamic Analysis”, MACHINE DESIGN - The Journal of Faculty of Technical Sciences, 3(3): 163 – 166.

  
  

  Radoičić G., Milosavljević P., Petrović G.,  (2011), ”Indikatori efektivnog transportnog modela upravljanja otpadom“, IMK 14 – Istraživanje i razvoj, 41.4: 61 – 67.

  
  

  Jovanović M., Milić P., Janošević D., Petrović G., (2010), ”Accuracy of FEM analysis in function of finite element type selection“,FACTA The Scentific journal FACTA UNIVERZITATIS, Series Mechanical Engineering, 8(1): 1 – 9.

  
  

  Jovanović M., Milić P., Petrović G., (2010), ”Risk of selecting a tetrahedron for fem structural modeling“, MACHINE DESIGN - The journal of Faculty of Technical Sciences 2: 169 – 174.

  
  

  Janošević D., Petrović G., Petrović N., (2009), ”Hydrostatic transsmisions calculation for mobile machines“, MACHINE DESIGN - The journal of Faculty of Technical Sciences, 1: 173 – 176.

  
  

  Petrović G., Petrović N., Marinković Z., (2008), ”Application of Markov’s Theory to Queuing Networks”, The Scentific journal FACTA UNIVERZITATIS, Series Mechanical Engineering, 6(1): 45 – 56.

  
  

  Marinković Z., Petrović G., (2004), “Processing the lifetima of bucket weel excavators parts in strip mine technologies”, The Scentific journal FACTA UNIVERZITATIS, Series Mechanical Engineering, 2(1): 109 – 124.

  
  

  Petrović G., Jevtić V., Mitrović M., Marinković Z., (2003), ”External Excitations and Disturbances with Bucket Wheel Excavators as Nelinear and Random Functions”, Presented at 6th ISNM-NSA NIŠ 2003, The Scentific journal FACTA UNIVERZITATIS, Series Mechanical Engineering,
  1(10): 1339 – 1346.

  
  

  Marinković Z., Marković S., Marinković D., Petrović G., Milić P., (2003), ”The Effect of Non-linear Excitations of Asynchronous Electric Motors on the Work of Driving Mechanisms of Cranes”, Presented at 6th ISNM-NSA NIŠ 2003, The Scentific journal FACTA UNIVERZITATIS, Series Mechanics, Automatic Control and Robotics, 3(15): 1139 – 1146.

  
  

  Marinković Z., Petrović G., Đorđević T., (2001), “Logistika kao osnova razvoja informacionog sistema u industriji komprimovanog gasa”, časopis Racionalizacija transporta i manipulisanja - Logistika, Jugoslovenska zajednica za paletizaciju - JZP, Beograd, 3: 7 – 10.

  
  

  Marinković Z., Đorđević T., Petrović G., (2001), “Identifikacioni sistemi za praćenje kretanja robe i informacija”, časopis Racionalizacija transporta i manipulisanja - Logistika, Jugoslovenska zajednica za paletizaciju - JZP, Beograd, 2: 5 – 8.

• Radovi na naučnim skupovima međunarodnog značaja:

  Lukić B., Petrović G., (2022), „Transportation problem with additional bounded capacity“, 4 th Virtual International Conference Path to a Knowledge Society-Managing Risks and Innovation - PaKSoM 2022, Proceedings pp. 65 - 72, ISBN: 978-86-82602-00-2, link.

  
  

  Lukić B., Petrović G., Milić P., Marinković D., Ćojbašić Ž., (2021), „Computational intelligence and machine learning in traffic and transportation“, The 8th International Conference - Transport and Logistics - til 2021, Proceedings pp. 149 - 156, ISBN 978-86-6055-156-8, Faculty of Mechanical Engineering, University of Niš, link.

  
  

  Stanković A., Petrović G., Marković D., Marković S, (2021), „Solving the unrelated parallel machine scheduling problem with setup times“, The 8th International Conference - Transport and Logistics - til 2021, Proceedings pp. 65 - 69, ISBN 978-86-6055-156-8, Faculty of Mechanical Engineering, University of Niš, link.

  
  

  Mihajlović J., Marković N., Petrović G., Marković D., Ćojbašić Ž., (2021), „Standards, Regulations and Legislation of Used Motor Oil Management and Disposal – A Review“, The Tennth Triennial International Conference Heavy Machinery - HM 2021, Proceedings pp. F37 - F42, ISBN 978-86-81412-09-1, Faculty of Mechanical and Civil Engineering in Kraljevo, link.

  
  

  Simić N., Stanković A., Mačužić I., Petrović G., (2021), „Possibility of implementing the Lean Six Sigma concept on logistics processes“, 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Proceedings pp. 330 - 338, ISBN 978-99938-39-92-7, University of Banja Luka, Faculty of Mechanical Engineering.

  
  

  Mihajlović J., Petrović G., Ćirić D., Madić M., (2021), „The material selection of the heating plates used in the vulcanization process obtained using different MCDM methods“, 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Proceedings pp. 367 - 374, ISBN 978-99938-39-92-7, University of Banja Luka, Faculty of Mechanical Engineering.

  
  

  Simić N., Stefanović M., Stanković A., Petrović G., (2020), „Smart Technology Application in Spare Parts Management Processes in Company FRITECH“, The fifth international conference “MECHANICAL ENGINEERING IN XXI CENTURY”, MASING 2020, Proceedings pp. 317-320, ISBN 978-86-6055-139-1, Faculty of Mechanical Engineering, University of Niš, link.

  
  

  Marković D., Stanković A., Petrović G., Trajanović M., Ćojbašić Ž., (2019), „Genetic and Ant Colony Optimization Based Communal Waste Collection Vehicle Routing“, 9th International Conference on Information Society and Techology, ICIST 2019, Proceedings, pp.209-212, ISBN 978-86-85525-24-7, Information Society of Serbia – ISOS, Belgrade, Serbia, link.

  
  

  Mihajlović J., Petrović G., Petrović N., Milić P., Ćirić D., (2019), „The location selection process for battery charging stations for two –  wheel electric vehicles regarding the importance of urban mobility in the city of Nis “, The Seventh International Conference Transport and Logistics - til 2019, Proceedings pp. 53-58, ISBN 978-86-6055-127-8, Faculty of Mechanical Engineering, University of Niš, link.

  
  

  Stanković A., Petrović G., Ćojbašić Ž., Madić M:, Tomić N., (2019), „An application of a genetic algorithm for the flexible job-shop scheduling problem“, The Seventh International Conference Transport and Logistics - til 2019, Proceedings pp. 47-52, ISBN 978-86-6055-127-8, Faculty of Mechanical Engineering, University of Niš, link.

  
  

  Stanković A., Marković D., Petrović G., Ćojbašić Ž., (2019), „Simulated annealing and particle swarm optimization for the vehicle routing problem and communal waste collection in urban areas“, 14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Proceedings pp. 497-505, ISBN 978-99938-39-84-2, University of Banja Luka, Faculty of Mechanical Engineering.

  
  

  Stević Ž., Petrović G., Stanujkić D., (2018), „Novel rough DELPHI method for determination weights of criteria", The 2nd International Conference on Management, Engineering and Environment - ICMNEE 2018, Obrenovac, Serbia, pp. 98 – 107;

  
  

  Ćojbašić Ž., Mihajlović J., Petrović G., Madić M., Marinković D., (2018), „Comparison of two fuzzy MCDM methods for supplier selection problem", XIV International SAUM Conference on Systems, Automatic Control and Measurements, SAUM 2018, Nis, Serbia, G4, pp. 1 – 4;

  
  

  Stanković A., Rajković P., Petrović G., (2018), "Usage of multicriteria analysis for selecting the appropriate host university to study", The 4th International Conference Mechanical Engineering in XXI Century MASING 2018, University of Niš Faculty of Mechanical Engineering in Niš, Niš, Serbia,  pp. 393 - 396.

  
  

  Milić P., Marinković D., Petrović G., Ćojbašić Z., (2018), "Modal isogeometric analysis of thin shells", The 4th International Conference Mechanical Engineering in XXI Century  MASING 2018, University of Niš Faculty of Mechanical Engineering in Niš, Niš, Serbia,  pp. 461-464;

  
  

  Marković D., Petrović G., Marković S., (2017), "Distance-constrained capacitated vehicle routing problems: case study and simulated data set", The sixth international conference transport and logistics - til 2017, University of Niš Faculty of Mechanical Engineering in Niš, Niš, Serbia, pp. 308 - 313;

  
  

  Luković A., Glišović S., Petrović G., (2017), "Reverse logistics model design for managing industrial waste stream", The sixth international conference transport and logistics - til 2017, University of Niš Faculty of Mechanical Engineering in Niš, Niš, Serbia, pp. 258 - 264;

  
  

  Jovanović V., Janošević D., Pavlović J., Petrović G., (2017), "Digging resistance model shovel manipulator of hydraulic excavator", IX triennial international conference heavy machinery - HM 2017, Zlatibor, Serbia, pp: 101-104;

  
  

  Pavlović J., Janošević D., Jovanović V., Petrović G., Spasović N., (2017), "Development of the power steering system in mobile machines", The sixth international conference transport and logistics - til 2017, University of Niš Faculty of Mechanical Engineering in Niš, Niš, Serbia, pp. 145-151;

  
  

  Milić P., Marinković D., Petrović G., (2015), "Isogeometric FE Analysis of Thin Walled Structures with Kirchhoff-Love Shell Element", Mechanical Engineering in XXI Century, MASING 2015, 3rd International Conference, Faculty of Mechanical Engineering in Niš, pp. 407 - 410;

  
  

  Jovanović V., Janošević D., Petrović G., Pavlović J., (2015), ”Analysis of Dynamic Stability of Excavator Depending on the Temperature of the Hydraulic Oil in Excavator Drive System”, 17th Symposium on Thermal Science and Engineering of Serbia, SIMTERM 2015, University of Niš, Faculty of Mechanical Engineering in Niš, Society of Thermal Engineers of Serbia,  pp.814-821;

  
  

  Marković D., Petrović G., Milošević M., Milić P., Madić M., (2015), "Metaheuristics for solving vehicle routing problems with stochastic demands for waste collection", 17th Symposium on Thermal Science and Engineering of Serbia, SIMTERM 2015, University of Niš, Faculty of Mechanical Engineering in Niš, Society of Thermal Engineers of Serbia, pp. 1123 - 1127;

  
  

  Tomić V., Petrović G., Marković D., Madić M., (2014), “Perspective of airline development, the case of "KONSTANTIN VELIKI" airport Niš“, The Eight Triennial International Conference HEAVY MACHINERY, HM 2014, Proceeding, University of Kragujevac, Faculty of Mechanical and Civil Engineering in Kraljevo, Zlatibor, Serbia, G Session pp. 25 – 30;

  
  

  Madić M., Radovanović M., Marković D., Petrović G., (2014), “Application of the copras method for selection of competitive non-conventional machining processes“, The Eight Triennial International Conference HEAVY MACHINERY, HM 2014, Proceeding, University of Kragujevac, Faculty of Mechanical and Civil Engineering in Kraljevo, Zlatibor, Serbia, B Session pp. 49 – 54;

  
  

  Madić M., Marković D., Petrović G., Radovanović M., (2014), “Application of copras method for supplier selection“, The Fifth International conference Transport and Logistics, TIL 2014, University  of  Niš,   Faculty  of  Mechanical  engineering, Niš, Serbia, Session 4 - Logistics, pp. 75 – 80;

  
  

  Petrović G., Marković D., Milić P., Ćojbašić Ž., Madić M., (2014), “Applications of matrix-analytic methods and phase-type distributions in stochastic logistic problems modeling“, The Fifth International conference Transport and Logistics, TIL 2014, University of Niš, Faculty  of  Mechanical  engineering, Niš, Serbia, Session 2 - Logistics, pp. 27 – 32;

  
  

  Milenković D., Jovanović M., Petrović G., Kocić N., Petrović N., (2012),“Extreme Hydraulic Oscillations – Base of Dynamical Regulation of the Pelton Turbine“, XI International conference on systems, automatic control and measurement - SAUM 2012, Association of Serbia for Systems, Automatic Control and Measurements, Faculty of Electronics, Faculty of Mechanical Engineering, University of Niš, Niš, Serbia, pp. 152 – 155.

  
  

  Petrović G., Ćojbašić Ž., (2011), “Comparison of clustering methods for failure data analysis: a real life application“, XV International Scientific Conference on Industrial Systems (IS'11), Proceeding, University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia, pp. 297 – 300.

  
  

  Marković D., Madić M., Marinković Z., Tomić V., Petrović, G., (2011), “Harmony search and genetic algorithms for engineering optimization:  theory and practice“, The VII International Scientific Conference Heavy Machinery, HM 2011, Proceeding, University of Kragujevac, Faculty of Mechanical Engineering Kraljevo, Vrnjacka Banja, Serbia, E Session pp. 43 – 48.

  
  

  Petrović G., Ćojbašić Ž., Marinković Z., (2011),“Optimal preventive maintenance using the theory of Markov processes and genetic algorithms“, The 7th international conference research and development of mechanical elements and systems, IRMES 2011,  Proceedings, University of Niš, Mechanical Engineering Faculty, Zlatibor, Serbia, pp. 431 – 436.

  
  

  Marinković D., Marinković Z., Petrović G., (2010), “Advances in fem-formulations for effective computation of geometrically nonlinear deformations“, The International Conference Mechanical Engineering in XXI Century, MASING 2010, Niš, Proceedings, University of Niš, Faculty of Mechanical Engineering, Niš, pp. 273 – 276.

  
  

  Nikolić V., Marković D., Petrović G., (2010), ”A tabu search heuristics for the vehicle routing problems with time window“, 3rd International Conference “SCIENCE AND HIGHER EDUCATION IN FUNCTION OF USTAINABLE DEVELOPMENT”, SED’10, Užice, Proceedings CD ROM, High business-technical school of Uzice, Serbia, Uzice, Section 4 pp. 141 – 146.

  
  

  Milić P., Petrović G., Jovanović M., Marinković Z., (2009), ”The Logistic Model of the Optimal Waste Collection System Routing“, XIX International Conference on “MATERIAL HANDLING, CONSTRUCTIONS AND LOGISTICS”, MHCL’09, Belgrade, Proceedings, Mechanical Engineering Faculty University of Belgrade, Belgrade, pp. 229 – 234.

  
  

  Miladinović S., Milčić D., Petrović G., (2009), ”Determination of the of bucket wheel excavator load spectrum as a basis for designing of transmission for bucket wheel rotation”, 3rd International Conference Balkan Power Transmission - BAPT 2009, Proceedings, Kallithea, Greece, pp. 601 – 606.

  
  

  Milić P., Petrović G., Jovanović M., Burić M., Petrović N., (2008), “Experimental - numerical analysis of dynamic process hydro-energetic breeches pipe”, VI International Triennial Conference Heavy Machinery - HM'08, Proceedings, Faculty of Mechanical Engineering Kraljevo, Kraljevo,  pp. E.53 – E.56.

  
  

  Janošević D., Anđelković B., Petrović G., (2008), “Hydrostatic transsmisions for movement of mobile machines on wheels”, VI International Triennial Conference Heavy Machinery - HM'08, Proceedings, Faculty of Mechanical Engineering Kraljevo, Kraljevo, pp. A.45 – A.48.

  
  

  Petrović G., Marinković Z., Marinković D., (2006), “Modeling and Simulation of the Operation of the Excavator’s Bucket Wheel Driving Mechanism”, XVIII International Conference on “MATERIAL HANDLING, CONSTRUCTIONS AND LOGISTICS”, MHCL’06, Belgrade, Proceedings, Mechanical Engineering Faculty University of Belgrade, Belgrade, pp. 139 – 144.

  
  

  Marinković Z., Vulić A., Marinković D., Petrović G., Marković S., Milić P., (2006), ”Analysis of modeling and simulation of the work of elektromotor drives”, The 2nd International Conference “POWER TRANSMISSIONS ‘06”, Novi Sad , Proceedings, Balkan Association of Power Transmissions, Faculty of tehnical Sciences Novi Sad, pp. 441 – 448.

  
  

  Marinković Z., Milić P., Marinković D., Petrović G., Marković S., (2005), “Modeling and simulation of the work of transport machines driving mechanisms with frequncz modulated electromotor drive”,The fifth International Conference HEAVY MACHINERY HM 2005, Mataruška banja, Proceedings, Faculty of Mechanical Engineering Kraljevo, pp ID.15 – ID.18.

  
  

  Janošević D., Jevtić V., Petrović G., (2003), ”Transmissions for the movement of mobile track machines with differential control”, International Conference “POWER TRANSMISSIONS ‘03”, Varna, Proceedings Sections III “Experimental investigations and applications” and CD, Balkan Association of Powwer Transmissions, Sofia, 2003.

  
  

  Đokić V., Petrović G., Miltenović Đ., Marinković Z., (2003), ”Identification of load spectrum for vitals elements of drive systems”, International Conference “POWER TRANSMISSIONS ‘03”, Varna, Proceedings Sections III “Experimental investigations and applications” and CD, Balkan Association of Powwer Transmissions, Sofia, pp 9 – 14.

• Radovi na domaćim naučnim skupovima:

  Stamenković D., Petrović G., (2011), ”Stacionarni dijagnostički sistemi u održavanju železničkih vozila”, Četvrti simpozijum sa međunarodnim učešćem transport i  logistika TIL 2011., Univerzitet u Nišu, Mašinski fakultet u Nišu, Niš, str. 63 – 68.

  
  

  Petrović G., Ćojbašić Ž., Marinković D., Marinković Z., Marković D., (2011), ”Više-kriterijumska optimizacija procesa održavanja primenom naprednih evolutivnih metoda”, Četvrti simpozijum sa međunarodnim učešćem transport i  logistika TIL 2011., Univerzitet u Nišu, Mašinski fakultet u Nišu, Niš, str. 75 – 78.

  
  

  Petrović G., Marinković Z., Milosavljević P., (2009), ”Određivanje optimalnog termina preventivnog održavanja primenom teorije markovljevih procesa”, Konferencija Održavanja KOD 2009., Zbornik radova, Društvo održavalaca sredstava za rad Crne Gore, Mašinski fakultet u Pedgorici – Centar za kvalitet, Savez inženjera Crne Gore, Bar – Crna Gora, str. 245 – 254.

  
  

  Milosavljević P., Ranđelović S., Petrović G., Radoičić G., (2009), ”Procesni pristup održavanju voznog parka u J.K.P. "Mediana" Niš”, Konferencija Održavanja KOD 2009., Zbornik radova, Društvo održavalaca sredstava za rad Crne Gore, Mašinski fakultet u Pedgorici – Centar za kvalitet, Savez inženjera Crne Gore, Bar – Crna Gora, str. 105 – 112.

  
  

  Marinković Z., Petrović G., Marinković D., Marković S., (2008), “Logistika pretovara kontejnera na terminalima”, XIII naučno-stručna konferencija o železnici, “Želkon ‘08”, Niš 2008., Zbornik radova, Mašinski fakultet Univerziteta u Nišu, Niš, str. 129 – 132.

  
  

  Janošević D., Đorđević Ž., Petrović G., (2008), “Sinteza pogonskog mehanizma korpe dampera”, Treći srpski simpozijum sa međunarodnim učešćem TIL 2008, Zbornik radova, Mašinski fakultet Univerziteta u Nišu, Niš, str. 23.1 – 23.8.

  
  

  Pešić P., Marinković Z., Petrović G., (2008), “Poboljšanje procesa snabdevanja u vojnoj organizaciji primenom logističkog controllinga”, Treći srpski simpozijum sa međunarodnim učešćem TIL 2008, Zbornik radova, Mašinski fakultet Univerziteta u Nišu, Niš, str. 13.1 – 13.6.

  
  

  Marinković Z., Vulić A., Petrović G., Marinković D., Milić P., (2006), ”Analitičko određivanje funkcija opterećenja elemenata pogonskih mehanizama mašina”, Naučno-stručni skup IRMES ’06 – “Istraživanje i razvoj mašinskih elemenata i sistema, Mrakovica 2006“, Zbornik radova, ADEK-o i Univerzitet u BanjaLuci Mašinski fakultet, Banja Luka, str. 249 – 254;

  
  

  Marinković Z., Milić P., Marinković D., Petrović G., (2006), “Modeliranje visokoregalnog skladišta i radnih ciklusa regalne dizalice”, Drugi srpski seminar sa međunarodnim učešćem TIL 2006, Zbornik radova, ISBN 86-80587-58-3, Mašinski fakultet Univerziteta u Nišu, Niš, str. 23.1 – 23.8.

  
  

  Petrović G., Jevtić V., Marinković Z., (2005), “Dynamisches Verhalten von Antriebssystmen am Beispiel eines Schaufelradantriebs”, 10. Fachtagung Schüttgutfördertechnik 2005 - Neue Trends in der Anlagenentwicklung, Magdeburg, pp 353 – 364.

  
  

  Marinković Z., Jovanović M., Milić P., Petrović G, (2004), “Parametarsko-geometrijsko projektovanje familija leptirastih zatvarača”, Treći skup o konstruisanju, oblikovanju i dizajnu, KOD-2004, Novi Sad, 2004, Zbornik radova, Fakultet tehničkih nauka Novi Sad i JUDEKO, Novi Sad, str. 137 – 144.

  
  

  Marinković Z., Petrović G., Milić P., (2004), “Kontejneri i njihova uloga u prevozu robe”, XI naučno stručna konferencija o železnici sa međunarodnim učešćem, “Želkon ‘04”, Niš 2004., Zbornik radova, Mašinski fakultet Univerziteta u Nišu, Niš, str. 117 – 122.

  
  

  Marinković Z., Marinković D., Petrović G., (2004), “Proračun radnog veka elemenata za spektre radnih napona sa dvoparametarskom raspodelom”, Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema IRMES ‘04, Kragujevac 2004., Zbornik radova, JUDEK-a i Mašinski fakultet u Kragujevcu, Kragujevac, str. 257 – 262.

  
  

  Petrović G., Marinković Z., (2004), “Dvoparametarska diskretizacija širokopojasnih promena radnih opterećenja i njihovi spektri”, Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema IRMES ‘04, Kragujevac 2004., Zbornik radova, JUDEK-a i Mašinski fakultet u Kragujevcu, Kragujevac, str. 239 – 244.

  
  

  Marinković Z, Mitrović M., Petrović G., Ilić V., (2004), “Analiza logističkih procesa u skladištu gotovih proizvoda pivarske industrije”, Prvi srpski seminar sa međunarodnim učešćem TIL 2004, Niš, 2004, Mašiski fakultet Univerziteta u Nišu, Niš, str. 19.1 – 19.8.

  
  

  Marinković Z., Petrović G. (2003), “Računska procena radnog veka vitalnih elemenata roto bagera”, 11. Savetovanje sa međunarodnim učešćem Rizik požara, eksplozije, havarije i provale u osiguranju i organizacija sistema zaštite, Zbornik radova, Beograd 2003, DUNAV PREVING, Beograd, str. 271 – 277.

  
  

  Jovanović M., Marinković Z., Milić P., Petrović G., (2003), “Parametarsko - geometrijski modeli u praksi”, Simpozijum o računarskim naukama i informacionim tehnologijama YUINFO 2003 - Kopaonik, Zbornik radova – CD ROM.

  
  

  Marinković Z., Jevtić V., Petrović G., Marković S., Milić P., (2003), “Računske simulacije opterećenja mašina teške mašinogradnje”, Simpozijum o računarskim naukama i informacionim tehnologijama YUINFO 2003 - Kopaonik, Zbornik radova – CD ROM.

  
  

  Marinković Z., Jevtić V., Janošević D., Petrović G., (2002), ”Verovatnosno-statistički proračun vitalnih elemenata pogonskih sistema roto bagera”, 10. jubilarno savetovanje sa međunarodnim učešćem "Sistemska analiza šteta u privredi, osiguranje i preventivno inženjerstvo", Zbornik radova, Beograd 2002, DUNAV PREVING, Beograd, str. 389 – 395.

  
  

  Đurđanović M., Petrović G., (2002), “O mogućnosti povećanja energetskih i ekonomskih efekata tribomehaničkih sistema pomoću selektivnog transfera mase”, X jugoslovenska konferencija “ŽELEZNIČKO MAŠINSTVO 2002” sa međunarodnim učešćem, Niš 2002., Zbornik radova, Mašinski fakultet Univerziteta u Nišu, Niš, str. 197 – 200.

• Tehnička rešenja:

  Jovanović M., Milić P., Petrović G., (2010), „Softverski paket za monitoring sakupljanja otpada“;

  
  

  Milić P., Marinković D., Petrović G., Janošević D., (2015), „Softver za izogeometrijsku strukturnu analizu“;

  
  

  Milić P., Nikolić B., Milošević M., Milanović S., Marković S., Petrović G., Marković D., Petrović N., (2015), „Softver za  ispitivanje / kontrolisanje vozila sa pogonom na TNG“.