Dodatne informacije

• Lični podaci

• Datum rođenja: 25.02.1979.
• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Mašinski fakultet u Nišu
• Odsek / Grupa / Smer: Proizvodno mašinstvo
• Godina diplomiranja: 2002.

• Spisak publikacija

• Radovi u časopisima sa IMPACT faktorom:

  - Lazarević A., Lazarević D., Damnjanović Z., Mladenović-Ranisavljević I., Prototype Expert System for Prediction of Plasma Cutting Parameters, TTEM – Technics Technologies Education Management, Journal of Society for Development of Teaching and Business Processes in New Net Environment, Vol. 7 No. 3, pp. 1331-1334, 2012, DRUNPP; ISSN: 1840-1503

  
  

  - Karamarković R., Karamarković V., Jovović A., Marašević M., Lazarević A., Biomass Gasification with Preheated Air: Energy and Exergy Analysis, Thermal Science, Vol. 16 No 2, pp. 535-550, 2012, Vinca Institute of Nuclear Science, Belgrade, Serbia; ISSN: 0354-9836

• Radovi u ostalim časopisima:

  - Karamarković R., Karamarković V., Lazarević A., Marašević M., Stojić N., Beloica B., Exergy analysis of biomass cogeneration system, IMK - 14 Istraživanje i razvoj, Vol.18, No. 4, pp. 123-128; ISSN: 0354-6829

  
  

  - Lazarević A., Janković Z., Critical Infrastructure Buildings - Risk Assessment, Monitoring and Control, Tokovi osiguranja: časopis za teoriju i praksu osiguranja, Vol. 29, No. 4, pp. 64-74; ISSN: 1451-3757

  
  

  - Lazarević D., Lazarević A., Artificial neural network application for plasma cutting modelling, The annals of Dunarea De Jos, University of Galati - Fascicle V, Technologies in Machine Building, Vol. II, No. 5, pp. 19-22; ISSN: 1221-4566

  
  

  - Lazarević D., Madić M., Janković P., Lazarević A., Surface roughness minimization of polyamide PA-6 turning by Taguchi method, Journal of Production Engineering, Vol. 15 No. 1, pp. 29-32, Mart 2012, University of Novi Sad, Faculty of Technical Sciences, Department of Production Engineering, Novi Sad, Serbia; ISSN: 1821-4932

  
  

  - Lazarević D., Madić M., Janković P., Lazarević A., Cutting Parameters Optimization for Surface Roughness in Turning Operation of Polyethylene (PE) Using Taguchi Method, Tribology in Industry, Vol. 34 No. 2, pp. 68-73, 2012, University of Kragujevac, Faculty of Engineering, Kragujevac, Serbia; ISSN: 0354-8996

  
  

  - Sharma V. K., Lazarević A., Fuels of the Future, Sampada, pp. 41-43, April 2005, India; ISBN: PR/RNP/PNW/M/67/2003-2005

  
  

  - Savić R., Solujić A., Lazarević A., Revitalizacija i modernizacija sistema daljinkog grejanja u Srbiji (Retrofitting of the District Heating System in Serbia), Klimatizacija Grejanje Hlađenje – KGH, Godina 34 Broj 2, pp. 41-44, May 2005, Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS); ISSN: 0350-1426 = KGH. Klimatizacija, grejanje, hlađenje

• Radovi na naučnim skupovima međunarodnog značaja:

  - Karamarković R., Karamarković V., Marašević M., Lazarević A., Simplified modeling of electrical cabinets, VIII Triennial International Conference Havy Machinery, June 2014, Zlatibor

  
  

  - Lazarević A., Lazarević D., Production management system in the case of plasma cutting process, 35th International Conference on Production Engineering, September 2013, Kopaonik; ISBN: 978-86-82631-69-9

  
  

  - Karamarković R., Karamarković V., Lazarević A., Marašević M., Stojić N., The Use of Preheated Low-Enriched Air in Downdraft Gasifiers: Energy and Exergy Analysis, 16th International Symposium on Thermal Science and Engineering of Serbia–SIMTERM 2013, November 2013; ISBN: 978-86-6055-043-1

  
  

  - Lazarević A., Karamarković R., Karamarković V., Lazarević D, Risk Analysis Methods for Small Hydro Power Plants in Creating Insurance Policy, 16th International Symposium on Thermal Science and Engineering of Serbia–SIMTERM 2013, November 2013; ISBN: 978-86-6055-043-1

  
  

  - Pavlović D., Milosavljević P., Lazarević A., Energy Efficiency Measures Implemented through Projects in Serbia, 16th International Symposium on Thermal Science and Engineering of Serbia–SIMTERM 2013, November 2013; ISBN: 978-86-6055-043-1

  
  

  - Lazarević D., Lazarević A., Krstić V., Analysis of the Plasma Hardfacing Process, The Second International Conference Mechanical engineering in XXI century, July 2013, Niš, Serbia; ISBN: 978-86-6055-039-4

  
  

  - Lazarević D., Lazarević A., Neural networks application for the prediction of technological parameters of plasma cutting process, The Second International Conference Mechanical engineering in XXI century, July 2013, Niš, Serbia; ISBN: 978-86-6055-039-4

  
  

  - Lazarević D., Lazarević A., Energy and Temperature Distribution during Plasma Cutting, Proceedings of the 7^th International Symposium, Machine and Industrial Design in Mechanical Engineering, KOD 2012, 24.-26. May 2012, Balatonfüred, Hungary; ISBN: 978-86-7892-399-9

  
  

  - Lazarević D., Lazarević A., Artificial neutral networks application for plasma cutting modelling, Proceedings of the 3^rd International Conference on Diagnosis and Prediction in Mechanical Engineering Systems, DIPRE’12 (on CD), 31 May – 1. June 2012, Galati, Romania; ISSN: 2285-1887

  
  

  - Lazarević A., Manić M., Lazarević D., Energy balance of the plasma arc cutting process, Proceedings on 34^th International Conference on Production Engineering, 29.-30. September 2011, Niš, Serbia; ISBN: 978-86-6055-019-6

  
  

  - Lazarević D., Madić M., Janković P., Lazarević A., Study on surface roughness minimization in turning of polyamide PA-6 using Taguchi method, Proceedings on 34^th International Conference on Production Engineering, 29.-30. September 2011, Niš, Serbia; ISBN: 978-86-6055-019-6

  
  

  - Lazarević A., Marinković V., Lazarević D., Expanded non linear mathematical models in the theory of experimental design: A Case Study, Proceedings on 10^th International Conference Research and Development in Mechanical Industry, RaDMI 2010, Vol. 1, pp. 304-310, 16.-19. September 2010, Donji Milanovac, Serbia; ISBN: 978-86-6075-017-6

  
  

  - Lazarević D., Lazarević A., Heat affected zone in the plasma cutting process, Proceedings on 8^th International Conference Research and Development in Mechanical Industry, RaDMI 2008 (on CD), pp. 241-246, 14.-17. September 2008, Užice, Serbia; ISBN: 978-86-83803-23-1

  
  

  - Karamarković V., Đakonović M., Lazarević A., Strategija primene mehanizama čistog razvoja na projekte u sektoru energetike Republike Srbije (Strategy of the application of Clean Development Mechanisms (CDM) on the Energy Sectors in Serbia), Proceedings of the International Symposium Power Plants 2008 (on CD), 28.-30. October 2008, Vrnjačka Banja, Serbia

  
  

  - Petrović M., Miloradović N., Lazarević A., Ecological aspects of gas engine application for CHP production in the heat plant Cerak, Proceedings of the International Symposium Power Plants 2006, 19.-23. September 2006, Vrnjačka Banja, Serbia

  
  

  - Lazarević A., Manić M., Lazarević D., Prototype Expert System for Performing the Plasma Cutting Process, Proceedings on 18^th International Conference on Production Research (on CD), 31. July - 4. August 2005, University of Salerno, Salerno, Italy; ISSN: 88-87030-96-0

  
  

  - Lazarević A., Radović M., Lazarević D., Mathematical Modeling of Plasma Arc Cutting Process, Proceedings on 5^th International Conference Research and Development in Mechanical Industry, RaDMI 2005, pp. 173-179, 4. – 7. September 2005, Vrnjačka Banja, Serbia and Montenegro; ISBN-10 86-83803-20-1 and ISBN-10 978-86-83803-20-0

  
  

  - Lazarević D., Lazarević A., Mathematical Modelling of Cutting Processing by Plasma, Proceedings on 4^th International Congress, Mechanical Engineering Technologies, MET’04, Vol. 2, pp. 144-147, 23.-25. September 2004, Varna, Bulgaria; ISSN: 1310-3946

  
  

  - Lazarević D., Rančić B., Lazarević A., Experimental research of the quality of procesing by plama cutting, Proceedings on 4^th International Conference Research and Development in Mechanical Industry, RaDMI 2004, pp. 208-215, 31. August - 04. September 2004, Zlatibor, Serbia and Montenegro; ISBN-10 86-83803-17-1 and ISBN-13 978-86-83803-17-0

  
  

  - Radovanović M., Lazarević A., Parameters Affecting Kerf Quality in Plasma Cutting, Proceedings on 3^rd International Conference Research and Development in Mechanical Industry, RaDMI 2003, Vol. 3, pp. 1154-1586, 19.-23. September 2003, Herceg Novi, Serbia and Montenegro; ISBN: 86-83803-08-2

  
  

  - Lazarević D., Lazarević A., Effect of the Point of Transition from the Injection Pressure to the Subsequent Pressure and of the Subsequent Pressure Duration upon the Pressure curve in the Mould Hollow, Proceedings on 3^rd International Conference Research and Development in Mechanical Industry, RaDMI 2003, Vol. 3, 19.-23. September 2003, Herceg Novi, Serbia and Montenegro; ISBN: 86-83803-08-2

  
  

  - Lazarević D., Lazarević A., Hydraulic forming thorn for rotary construction, Proceedings of 1^st National Conference on Recent Advances in Mechanical Engineering, ASME International – Greek Section, 17. – 20. September 2001, Patras, Greece

• Radovi na domaćim naučnim skupovima:

  - Lazarević A., Janković Z., Procena rizika kritične infrastructure, V Međunarodno Savetovanje - Upravljanje rizicima požara DITUR 2013, Sava Centar, Beograd

  
  

  - Lazarević A., Dabić N., Primena prilagođene liste usklađenih ciljeva u obrazovnim ustanovama, Reinženjering poslovnih procesa u obrazovanju - RPPO13, Septembar 2013. godine; ISBN: 978-86-7776-143-1

  
  

  - Janković P., Lazaravić A., Lazaravić D., Rezanje plazmom i unapređenja kvaliteta presečne površine, Zbornik radova 33. savetovanja proizvodnog mašinstva Srbije, sa međunarodnim učešćem, pp. 39-42, 16.-17. jun 2009, Beograd, Srbija; ISBN: 978-86-7083-662-4

  
  

  - Rančić B., Lazarević A., Lazarević D., Analiza energetskog bilansa kod rezanja plazmom, Zbornik radova 33. savetovanja proizvodnog mašinstva Srbije, sa međunarodnim učešćem, pp. 35-38, 16.-17. jun 2009, Beograd, Srbija; ISBN 978-86-7083-662-4

  
  

  - Manić M., Lazarević D., Lazarević A., Ekspertni sistem za predikciju tehnoloških parametara procesa rezanja plazmom, Zbornik radova 30. Jubilarno savetovanje proizvodnog mašinstva SCG sa međunarodnim učešćem, pp. 345-352, 1.-3. September 2005, Vrnjačka Banja, Serbia; ISBN: 86-7776-009-1

  
  

  - Savić R., Solujić A., Lazarević A., Revitalizacija i modernizacija sistema daljinskog grejanja u Srbiji, Zbornik radova 35. Međunarodni kongres o klimatizaciji, grejanju i hlađenju, 1.-3. December 2004, Belgrade, Serbia

  
  

  - Lazarević D., Krstić V., Lazarević A., Drifting of plate by Plasma, Proceedings on 28^th International Conference of the Manufacturing Engineering, 21.-23. September 2000, Mataruška Banja, Yugoslavia