Dodatne informacije

• Lični podaci

• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Elektronski fakultet u Nišu
• Odsek / Grupa / Smer: Mikroelektronika
• Godina diplomiranja: 1974

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  24.  Randjelović B.M., Nikolić Z.S. (2020) A Mathematical Model for Simulation of Intergranular μ-Capacitance as a Function of Neck Growth in Ceramic Sintering. In: Daras N., Rassias T. (eds) Computational Mathematics and Variational Analysis. Springer Optimization and Its Applications, vol 159. Springer, Cham, pp. 403-420 
  DOI: https://doi.org/10.1007/978-3-030-44625-3_22
  Print ISBN 978-3-030-44624-6
  Online ISBN 978-3-030-44625-3

  
  

  23. Z.S. Nikolic, Computer Simulation of Liquid Redistribution Induced by Rearrangement During Liquid Phase Sintering, Proceedings of the IV Advanced Ceramics and Applications Conference, Bill Lee, Rainer Gadow and Vojislav Mitic (Eds.), Atlantis Press 2017, pp. 357-373.
  ISBN 978-94-6239-212-0 (Print)
  ISBN 978-94-6239-213-7 (eBook)
  Chapter DOI: 10.2991/978-94-6239-213-7

  
  

  22. Z.S. Nikolic, K. Shinagawa and B. Randjelovic, A Method for Simulation of Grain Coarsening Due to Diffusion in Capillary Liquid Bridge, Proceedings of the III Advanced Ceramics and Applications Conference, William E. Lee, Rainer Gadow, Vojislav Mitic, Nina Obradovic (eds.), Atlantis Press 2016, pp. 85-114. 
  ISBN 978-94-6239-156-7
  ISBN 978-94-6239-157-4 (eBook)
  DOI 10.2991/978-94-6239-157-4
  Chapter DOI: 10.2991/978-94-6239-157-4_7

  
  

  21. Z.S. Nikolic, Computer Modeling of Rearrangement in Liquid Phase Sintering (Chapter 1), in Computer Science, Technology and Applications, Computer Simulations: Technology, Industrial Applications and Effects on Learning, Eds: Boris Nemanjic and Navenka Svetozar, Nova Science Publishers, New York 2013, pp. 1-54.
  ISBN: 978-1-62257-580-0
  ISBN: 978-1-62257-581-7 (eBook).

  
  

  20. Z.S. Nikolic, Numerical Method for Computer Study of Liquid Phase Sintering: Densification Due to Gravity Induced Skeletal Settling, APPROXIMATION AND COMPUTATION Springer Optimization and Its Applications, Vol. 42, Gautschi, Walter; Mastroianni, Giuseppe; Rassias, Themistocles M. (Eds.), 1st Edition., 2010, XXII, pp. 409-424.
  DOI: 10.1007/978-1-4419-6594-3_27
  ISSN 1931-6828
  Print ISBN 978-1-4419-6593-6
  Online ISBN 978-1-4419-6594-3

  
  

  19. Z.S. Nikolic, Computer simulation of liquid phase sintering: gravity induced skeletal structure evolution - A review, Materials Science Forum Vol. 624 (2009) pp 19-42.
  doi:10.4028/www.scientific.net/MSF.624.19
  ISSN: 1662-9752

  
  

  18. L.F. Pryadko, Z.S. Nikolic, M.V. Nikolic, S.M. Radic, N. Labus, A. Maricic and M.M. Ristic, General Principles of the Kinetics and Mechanism of Sintering, Eds. M.M. Ristic and A. Maricic, Institute of Technical Scinces of SASA, Belgrade, 2006.
  ISBN 86-80321-10-9

  
  

  17. Z.S. Nikolic and G. Tomandl, Computer Study of Capillary Forces and Rearrangement during Initial Stage of Liquid Phase Sintering, Materials Processing for Properties and Performance (MP3) Vol. 2, Edited by K.A. Khor, Y. Watanabe, K. Komeya and H. Kimura. Institute of Materials (East Asia), (2004) pp. 201-211.
  ISBN: 981-05-0009-2

  
  

  16. Z.S. Nikolic, Computer Simulation of Solid State Sintering (pp. 125-143), Computer Simulation of Liquid Phase Sintering (pp. 145-156), in RAPID PROTOTYPING - Materials & Technologies, Eds. S. Meriani and L. Nhanala, International Centre for Science and High Technology ICS-UNIDO, Trieste (2002).

  
  

  15. V.V. Mitic, Z.S. Nikolic, I. Mitrovic, B. Jordovic, V. Brankov, The Application of Stereology Method for Estimating the Number of 3D BaTiO3 - Ceramic Grains Contact Surfaces, Image Anal Stereol 2001;20:231-237.
  doi: 10.5566/ias.v20.p231-237
  ISSN: 1580-3139

  
  

  14. Z.S. Nikolic, Computer Modeling and Simulation of Sintering Process and Their Role in Development of Technology-Structure-Properties Triad, Sintering and Sintered Materials in the Triad "Synthesis-Structure-Properties, Eds. M.M. Ristic and A.M. Maricic, Materials Science Monographs, 38, Belgrade, 1999, pp. 41-53.

  
  

  13. Z.S. Nikolic, Simulation of Two-Dimensional Microstructural Development During Liquid Phase Sintering, in Advanced Science and Technology of Sintering, eds. B.D. Stojanovic, V.V. Skorokhod, and M.V. Nikolic, Kluwer Academic/Plenum Publishers, New York, 1999, pp. 29-39.
  DOI: 10.1007/978-1-4419-8666-5_3
  ISBN: 978-1-4613-4661-6 (Print)
  ISBN: 978-1-4419-8666-5 (eBook)

  
  

  12. Z.S. Nikolic, I. Mitrovic, and V.V. Mitic, Computer Simulation of Neck Growth During Sintering Process, in Advanced Science and Technology of Sintering, eds. B.D. Stojanovic, V.V. Skorokhod, and M.V. Nikolic, Kluwer Academic/Plenum Publishers, New York, 1999, pp. 61-66.
  DOI: 10.1007/978-1-4419-8666-5_6
  ISBN: 978-1-4613-4661-6 (Print)
  ISBN: 978-1-4419-8666-5 (eBook)

  
  

  11. V.M. Minic, Z.S. Nikolic, and M.M. Ristic, Analysis of the Sintering Process of ZnO and CdO by the Application of Sintering Diagrams, in Advanced Science and Technology of Sintering, eds. B.D. Stojanovic, V.V. Skorokhod, and M.V. Nikolic, Kluwer Academic/Plenum Publishers, New York, 1999, pp. 245-249.
  DOI: 10.1007/978-1-4419-8666-5_34
  ISBN: 978-1-4613-4661-6 (Print)
  ISBN: 978-1-4419-8666-5 (eBook)

  
  

  10. Lj. Zivkovic, B. Stojanovic, and Z.S. Nikolic, Characterization of Domain Structure in BaTiO3 Based Ceramics By Scanning Electron Microscopy, in Advanced Science and Technology of Sintering, eds. B.D. Stojanovic, V.V. Skorokhod, and M.V. Nikolic, Kluwer Academic/Plenum Publishers, New York, 1999, pp. 391-396.
  DOI: 10.1007/978-1-4419-8666-5_55
  ISBN: 978-1-4613-4661-6 (Print)
  ISBN: 978-1-4419-8666-5 (eBook)

  
  

  9. A.M. Maricic, V.M. Minic, M.V. Nikolic, Z.S. Nikolic, I.F. Pryadko, S.M. Radic, M.M. Ristic and F.V. Skripnik, Prognosis of Material Properties based on the Configuration Model of Solids, Ed. by M.M. Ristic and A.M. Maricic, Materials Science Monographs, 34, Beograd-Čačak (1997).

  
  

  8. M.M. Ristić, L.F. Prjadko, Ju.A. Kunicki, Z.S. Nikolić, M.M. Živković, M.V. Nikolić, S.M. Radić, Prognoza fizičko-hemijskih svojstava materijala, Monografije nauke o materijalima, 29, Centar za multidisciplinarne studije Univerziteta u Beogradu, Beograd (1996).

  
  

  7. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, A New Computer Model of Ostwald Ripening, Sintering Technology, Eds. R.M. German, G.L. Messing and R.G. Cornwall, Marcel Dekker, Inc., New York, 1996, pp. 423-430.
  ISBN: 0-8247-9775-2

  
  

  6. Z. Nikolić, Keramički dijagrami stanja: Dokumentacioni sistem, Monografije nauke o materijalima, 25, Centar za multidisciplinarne studije Univerziteta u Beogradu, Beograd (1995).

  
  

  5. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, Contribution to Investigation of the Sintering Process from the Point of Sintering Diagrams, Sintering '85, Ed. by G.C. Kuczynski, D.P. Uskokovic, H. Palmour III and M.M. Ristic, Plenum Press, New York, 1987, pp. 53-57.
  ISBN: 0-306-42541-6

  
  

  4. N. Stojadinović, Z. Nikolić, S. Mijalković, D. Pantić, Puštanje u rad i povezivanje softvera za modeliranje procesa SUPREM i softvera za modeliranje MOS komponenata MINIMOS, Elektronski fakultet, Univerzitet u Nišu, Niš (1987).

  
  

  3. Z.S. Nikolić, Dokumentacioni sistem za naučno-tehničku dokumentaciju iz oblasti zaštite na radu, RO Institut za dokumentaciju zaštite na radu "Edvard Kardelj" - Niš, Centar za dokumentaciju, Niš (1983).

  
  

  2. Z.S. Nikolic, M.M. Ristic, Computer Simulation of Geometry Change during Liquid Phase Sintering, in Sintering - Theory and Practice, Materials Science Monographs, 14, Elsevier Scientific, Amsterdam, The Netherlands, 1982, pp. 477-481.

  
  

  1. Z.S. Nikolic, M.M. Ristic, Alternative Sintering Diagrams, Sintering Science and Technology, International Institute for Science of Sintering, Beograd/Yugoslavia (1977), pp. 19-23.

• Knjige i udžbenici:

  10. Z.S. Nikolić, Izazovi samovrednovanja na univerzitetu, Kultura Kvaliteta: Iskustva domaćih i stranih partnera, Drugi deo, Urednik Vesna Lopičić, Univerzitet u Nišu, 2011, str. 3-31.
  ISBN: 978-86-7181-078-4

  
  

  9. Z.S. Nikolić, M.M. Ristić, Baze podataka oksidnih sistema visoke tehnologije - I Principi projektovanja, Edicija: Nauka o materijalima, 15, Centar za multidisciplinarne studije Univerziteta u Beogradu, Beograd (1990).

  
  

  8. E.M. Savitskii, V.B. Gribulya, N.N. Kiselyova, M. Ristic, Z. Nikolic, Z. Stojiljkovic, M. Zivkovic, I.P. Arsentiyeva, Prediction in Materials Science Using Computer /in Russian/, Moscow: Nauka (1990).
  ISBN: 5-02-006045-3

  
  

  7. Z.S. Nikolić, Koncept informacionog podsistema kontrole kvaliteta kao dela jedinstvenog sistema radne organizacije, Elektronski fakultet, Univerzitet u Nišu, Niš (1989).

  
  

  6. Z.S. Nikolić, Statistička kontrola kvaliteta: priručnik za seminar, SOUR Ei - Niš, Centar za stručno obrazovanje i usavršavanje kadrova, Niš (1989).

  
  

  5. Z.S. Nikolić, Z. Stamenković, M. Dinić, Program unapređenja kvaliteta tehnoloških procesa metodama statističke kontrole, Elektronski fakultet, Univerzitet u Nišu, Niš (1988).

  
  

  4. Z.S. Nikolić, Statistička kontrola kvaliteta: priručnik, Elektronski fakultet, Univerzitet u Nišu, Niš (1987).

  
  

  3. M.M. Ristić, Z.S. Nikolić, Teorija dijagrama sinterovanja sa osnovama fizike sinterovanja, Srpska akademija nauka i umetnosti, Posebno izdanje, Odeljenje tehničkih nauka, Knjiga 27, Beograd (1987).
  ISBN-10: 8670250268
  ISBN-13: 978-8670250260

  
  

  2. Z.S. Nikolić, Informacioni sistem za prikupljanje, obradu i distribuciju podataka o povredama na radu za područje SR Srbije bez pokrajina, RO Institut za dokumentaciju zaštite na radu "Edvard Kardelj" - Niš, Centar za dokumentaciju, Niš (1982).

  
  

  1. M.M. Ristić, S.M. Stojilković, Z. Nikolić, D. Stefanović, Lj. Nikolić, J. Lazović, Elektrotehnički materijali - Repetitorijum i rešeni zadaci, Univerzitet u Nišu, Niš (1980).

• Radovi u časopisima sa IMPACT faktorom:

  54. Z.S. Nikolic and K. Shinagawa, Capillary liquid bridge and grain coarsening during liquid phase sintering, Science of Sintering, 49 (2017) 1-10
  doi: 10.2298/SOS1701001N
  ISSN: 0350-820X

  
  

  53. Z.S. Nikolic, Theoretical study of skeletal structure evolution under topological constraints during sintering, Mathematical and Computer Modelling 57 (2013) 1060–1069. 
  DOI: 10.1016/j.mcm.2012.06.026
  ISSN 0895-7177

  
  

  52. B. Randjelovic, K. Shinagawa and Z.S. Nikolic, A Mathematical Approach to Ostwald Ripening Due to Diffusion and Deformation in Liquid Bridge, Science of Sintering, 45 (2013) 261-271.
  doi: 10.2298/SOS1303261R
  ISSN: 0350-820X

  
  

  51. Z.S. Nikolic, Three-dimensional computer simulation of grain coarsening during sintering, Science of Sintering, 44 (2012) 3-15. 
  doi: 10.2298/SOS1201003N
  ISSN: 0350-820X

  
  

  50. Z.S. Nikolic, F. Wakai, Three-dimensional computer study of rearrangement during liquid phase sintering, Mathematical and Computer Modelling 55 (2012) 1251–1262.
  doi:10.1016/j.mcm.2011.10.005
  ISSN 0895-7177

  
  

  49. Z.S. Nikolic and K. Shinagawa, A three-dimensional computer study of gravity induced skeletal structure evolution during liquid phase sintering, Mathematical and Computer Modelling 55 (2012) 1825–1832.
  doi:10.1016/j.mcm.2011.11.039
  ISSN 0895-7177

  
  

  48. F. Wakai, Z.S. Nikolic, Effect of grain boundary sliding on shear viscosity and viscous Poisson’s ratio in macroscopic shrinkage during sintering, Acta Materialia 59 (2011) 774–784.
  doi:10.1016/j.actamat.2010.10.021
  ISSN: 1359-6454

  
  

  47. Z.S. Nikolic, M.M. Ristic and  K. Shinagawa, Three-dimensional computer simulation of time-dependent skeletal structure evolution during liquid phase sintering, 2011 IOP Conf. Ser.: Mater. Sci. Eng. 18 022003.
  doi: 10.1088/1757-899X/18/2/022003
  ISSN 1757-899X

  
  

  46. Z.S. Nikolic and  F. Wakai, Computer study of liquid phase sintering - three-dimensional time dependent rearrangement, 2011 IOP Conf. Ser.: Mater. Sci. Eng. 18 022004.
  doi: 10.1088/1757-899X/18/2/022004
  ISSN 1757-899X

  
  

  45. Z.S. Nikolic, M. Yoshimura, Numerical simulation of pore evolution during liquid phase sintering, Mathematical and Computer Modelling 51 (2010) 1140-1145.
  doi:10.1016/j.mcm.2009.12.025
  ISSN 0895-7177

  
  

  44. Z.S. Nikolic, Numerical simulation of gravity induced skeletal settling during liquid phase sintering, Mathematical and Computer Modelling 51 (2010) 1146-1153.
  doi:10.1016/j.mcm.2009.12.026
  ISSN 0895-7177

  
  

  43. Z.S. Nikolic and M. Yoshimura, Computer Simulation of Rapid Solidification With Undercooling: A Case Study of Spherical Ceramics Sample on Metallic Substrate. Science of Sintering, 42 (2010) 33-43.
  doi: 10.2298/SOS1001033N
  ISSN: 0350-820X

  
  

  42. V.V. Mitic, Z.S. Nikolic, V.B. Pavlovic, V. Paunovic, M. Miljkovic, B. Jordovic, Lj. Zivkovic (2010), Influence of Rare-Earth Dopants on Barium Titanate Ceramics Microstructure and Corresponding Electrical Properties, Journal of American Ceramic Society, 93: 132–137.
  doi: 10.1111/j.1551-2916.2009.03309.x
  ISSN: 1551-2916

  
  

  41. T. Ishigaki, Z.S. Nikolic, T. Watanabe, N. Matsushita, M. Yoshimura, Lattice energy calculation for quantitatively-modeled Perovskite distortion, Solid State Ionics 180 (2009) 475–479.
  doi:10.1016/j.ssi.2008.12.017
  ISSN: 0167-2738

  
  

  40. Z.S. Nikolic, Liquid Phase Sintering - I. Computer Study of Skeletal Settling and Solid Phase Extrication in Normal Gravity Environment, Science of Sintering, 40[1] (2008) 3-12.
  doi:10.2298/SOS0801003N
  ISSN 0350-820X

  
  

  39. Z.S. Nikolic, Liquid Phase Sintering - II. Computer Study of Skeletal Settling and Solid Phase Extrication in Microgravity Environment, Science of Sintering, 40[2] (2008) 107-116.
  doi:10.2298/SOS0802107N
  ISSN 0350-820X

  
  

  38. Z.S. Nikolic, M. Yoshimura, Numerical simulation of rapid solidification of a spherical sample on a metallic substrate, Journal of Materials Science (2007) 42:7729-7729.
  DOI 10.1007/s10853-007-1658-y
  ISSN 0022-2461

  
  

  37. Z.S. Nikolic, M. Yoshimura, S. Araki and T. Fujiwara, Finite Difference Method for Computer Study of Interfacial Heat Transfer Coefficient During Rapid Solidification of Spherical Sample on Metallic Substrate, Science of Sintering, 39 (2007) 111-116.
  doi:10.2298/SOS0702111N
  ISSN 0350-820X

  
  

  36. Z.S. Nikolic, Basic and Mixed Models for Two-Dimensional Computer Simulation of Liquid Phase Sintering of Porous Structure, Science of Sintering, 39 (2007) 3-8.
  doi:10.2298/SOS0701003N
  ISSN 0350-820X

  
  

  35. Z.S. Nikolic, Computer Simulation of Free Settling and Skeletal Settling During Liquid Phase Sintering, Science of Sintering, 38 (2006) 41-54.
  doi:10.2298/SOS0601041N
  ISSN:0350-820X

  
  

  34. Z.S. Nikolic, A simple model for 3-D visualization of model topology due to rearrangement in liquid phase sintering, Computers and Mathematics with Applications 51 (2006) 551-558.
  doi: 10.1016/j.camwa.2005.07.014
  ISSN:0898-1221

  
  

  33. Lj. Zivkovic, Z. Nikolic, S. Boskovic and M. Miljkovic, Microstructural characterization and computer simulation of conductivity in Si3N4-TiN composites, Journal of Alloys and Compounds 373 (1-2) (2004) 231-236.
  doi:10.1016/j.jallcom.2003.10.036
  ISSN: 0925-8388

  
  

  32. Z.S. Nikolic, A model for 3-D study of rearrangement in liquid phase sintering, Zeitschrift für Metallkunde 2004/11, pp. 993-1000.
  ISSN: 1862-5282

  
  

  31. Z.S. Nikolic, Simulation of intergranular impedance as a function of diffusion processes, Journal of Materials Science: Materials in Electronics 13 (2002) 743-749; Dec 2002.
  DOI:10.1023/A:1021524730488
  ISSN 0957-4522

  
  

  30. Z.S. Nikolic, Basic, Extended and Combined Models for Computer Simulation of Liquid Phase Sintering, Science of Sintering, 34 (1), 41-51 (2002).
  ISSN: 0350-820X

  
  

  29. Z.S. Nikolic, A Computer Study of Gravitational Effects on Microstructure During Liquid Phase Sintering Using Random Generated Translation and Rotation, Science of Sintering, Vol. 32, Special Issue (2000), 61-69.
  ISSN: 0350-820X

  
  

  28. V.M. Minic, Z.S. Nikolic, T. Sreckovic, Analysis of the Sintering Process of Zinc Oxide Using Sintering Diagrams, Science of Sintering, 31(3), 201-205 (1999).
  ISSN: 0350-820X

  
  

  27. Z.S. Nikolic, Modeling of Liquid Phase Sintering Under Microgravity Conditions, Science of Sintering, 31 (2), 83-89 (1999).
  ISSN: 0350-820X

  
  

  26. Lj.M. Zivkovic, B.D. Stojanovic, V.B. Pavlovic, Z.S. Nikolic, B.A. Marinkovic, T.B. Sreckovic, SEM Investigation of Domain Structure in (Ba, Ca, Pb)TiO3, Journal of the European Ceramic Society 19 (1999) 1085-1087.
  PII: S0955-2219(98)00379-3
  doi: 10.1016/S0955-2219(98)00379-3
  ISSN: 0955-2219

  
  

  25. Z.S. Nikolic, Computer simulation of grain growth by grain boundary migration during liquid phase sintering, Journal of Materials Science 34(4): 783-794, Feb 1999.
  doi: 10.1023/A:1004577014266
  ISSN: 0022-2461

  
  

  24. V.M. Minić, I.P Arsentjeva, Z.S. Nikolić, M.M. Ristić, A Complex Analysis of the Sintering Process of Nickel Powder, Science of Sintering, 30, Spec. Issue, Theory and Technology of Sintering, 39-44 (1998).
  ISSN: 0350-820X

  
  

  23. V.V. Mitić, Z.S. Nikolić, I. Petković, Electrical Properties of BaTiO3-Ceramics and the Structure of the Grain Boundary Region, Science of Sintering, 30, Spec. Issue, Theory and Technology of Sintering, 45-52 (1998).
  ISSN: 0350-820X

  
  

  22. Z.S. Nikolic, M.V. Nikolic, I. Krstanovic, S.Dj. Milosevic, S.M. Radic, M.V. Susic, M.M. Ristic, Kinetics and Mechanism of Mechanochemical Activation of a Bi2O3 Powder, Science of Sintering, 28 (2) 109-115 (1996).
  ISSN: 0350-820X

  
  

  21. Z.S. Nikolic, Modeling and Simulation of Diffusion Phenomena During Liquid Phase Sintering, Science of Sintering, 28, Special Issue, Theory and Technology of Sintering II, 55-61 (1996).
  ISSN: 0350-820X

  
  

  20. V.V. Mitic, Z.S. Nikolic, A Computer-Aided System for the Design of Optimal BaTiO3 Ceramics, Science of Sintering, 28, Special Issue, Theory and Technology of Sintering II, 137-142 (1996).
  ISSN: 0350-820X

  
  

  19. U. Scholz, Z.S. Nikolic, F. Mücklich and G. Petzow, Determination and modification of the thermal conditions in a double ellipsoid mirror furnace, Journal of Crystal Growth 169 (1996) 578-581.
  PII S0022-0248(96)00433-2

  
  

  18. V.V. Mitic, Z.S. Nikolic, B. Jordovic and M.M. Ristic, Dielectric Properties of Barium-Titanate Ceramics as a Function of the Grain Size Distribution, Science of Sintering, 28 (3), 175-183 (1996).
  ISSN: 0350-820X

  
  

  17. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, A Simple Method for the Determination of Neck Growth Kinetics During the Sintering Process, Science of Sintering, 27 (1), 17-22 (1995).
  ISSN: 0350-820X

  
  

  16. Z.S. Nikolic, R.M. Spriggs, Computer Simulation of Diffusion Process during Liquid Phase Sintering, Science of Sintering, 26 (1), 1-9 (1994).
  ISSN: 0350-820X

  
  

  15. I. Krstanovic, M.V. Nikolic, R.M. Novakovic, Z. Nikolic, M.M. Zivkovic, M.M. Ristic, A Mechanism for Cold Sintering of Copper Powder, Science of Sintering, 25 (3), 145-153 (1993).
  ISSN: 0350-820X

  
  

  14. Z.S. Nikolic, General Aspects of Computer-Aided Design of Liquid Phase Sintering (Review Paper), Science of  Sintering, 26 (2), 107-118 (1994).
  ISSN 0350-820X

  
  

  13. M. Atanasovska, I. Krstanovic, Z.S. Nikolic, M.V. Nikolic, S.M. Radic, M.M. Ristic, Sintering of ZnO-B2O3 System, Science of Sintering, 26 (3), 277-283 (1994).
  ISSN 0350-820X

  
  

  12. V.V. Mitic, Z.S. Nikolic, The Influence of Additives on Electrical Characteristics of Barium Titanate Ceramics, Science of Sintering, 26 (2), 167-171 (1994).
  ISSN 0350-820X

  
  

  11. R. Agatonovic, B. Radojevic, V. Blank, Z. Nikolic, I. Timofeeva and M. M. Ristic, Cold sintering of copper binary systems exposed to shear deformation, Powder Technology, Volume 72, Issue 2, 15 October 1992, Pages 193-195.

  
  

  10. I. Krstanovic, B. Zivanovic, Z. Nikolic, T. Milovanovic, R. Novakovic, S.M. Radic, J. Ranogajec, A. Radakovic, The Influence of Bi2O3 Powder Activity on Its Sintering, Science of Sintering, 24 (3), 177-185 (1992).
  ISSN: 0350-820X

  
  

  9. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, Computer Modeling of Grain Growth Rate during Liquid Phase Sintering, Science of Sintering, 24 (1), pp. 49-53 (1992).
  ISSN: 0350-820X

  
  

  8. S.M. Stojilkovic, Lj.M. Zivkovic, M.M. Ristic, Z.S. Nikolic, The Contribution to the Study of  Annihilation of Defects by Electrical Resistivity Measurement, Science of Sintering, 14, pp. 57-61 (1982).
  ISSN: 0350-820X

  
  

  7. M.M. Pejovic, Dj.A. Bosan, Z. Nikolic, Distribution of Time Delay of Electrical Breakdown in Nitrogen, J.Phys.D: Appl. Phys., 15, pp. 867-872 (1982).

  
  

  6. Z.S. Nikolic, M.M. Ristic, The Modeling of the Liquid Phase Sintering, Science of Sintering, 13 (N-2), pp. 91-102 (1981).
  ISSN: 0350-820X

  
  

  5. Z.S. Nikolic, M.M. Ristic, W.J. Huppmann, Application of Numerical Method for Grain Growth Analysis during Liquid Phase Sintering, Science of Sintering, 12 (1), pp. 19-23 (1980).
  ISSN: 0350-820X

  
  

  4. Z.S. Nikolic, W.J. Huppmann, Computer Simulation of Chemically Driven Grain Growth during Liquid Phase Sintering, Acta Metallurgica, 28, pp. 475-479 (1980).
  ISSN: 0001-6160

  
  

  3. D. Uskokovic, Z. Nikolic, M.M. Ristic, The Analysis of Metals Sintering from the Standpoint of Sintering Maps, Science of Sintering, Special Issue, 11, pp. 59-84 (1979).
  ISSN: 0350-820X

  
  

  2. D. Uskokovic, Z. Nikolic, M.M. Ristic, The Analysis of the Sintering Process on the Basis of Sintering Maps, Science of Sintering, Special Issue, 10, pp. 149-156 (1978).
  ISSN: 0350-820X

  
  

  1. Z.S. Nikolic, A New Way of Presenting of Sintering Diagrams, Science of Sintering, 8, pp. 151-156 (1976).
  ISSN: 0350-820X

• Radovi u ostalim časopisima:

  21. V. Miltenović, Z. Nikolić, M. Milojković, S. Perić, SYSTEMATIC APPROACH TO THE EDUCATION IN THE FIELD OF SMART PRODUCTS AND SERVICES ENGINEERING, Facta Universitatis, Series: Automatic Control and Robotics, Vol 20, No. 3 (2021) 189-201
  DOI: 10.22190/FUACR210908015M
  Print ISSN: 1820-6417
  Online ISSN: 1820-6425

  
  

  20. Z.S. Nikolic and M. Yoshimura, Two-dimensional heat transfer model for rapid solidification of ceramic alloys, Key Engineering Materials Vol. 352 (2007) pp. 13-16
  doi:10.4028/www.scientific.net/KEM.352.13
  ISSN: 1662-9795

  
  

  19. Z.S. Nikolic and M. Yoshimura, Computer study of skeletal settling combined with extrication of solid phase domains during liquid phase sintering of tungsten heavy alloy, Key Engineering Materials Vol. 352 (2007) pp. 9-12
  doi: 10.4028/www.scientific.net/KEM.352.9
  ISSN: 1662-9795

  
  

  18. Z.S. Nikolic, M. Yoshimura and S. Araki, 2-D Computer Simulation of Rapid Solidification, Materials Science Forum, Vol. 494, 2005, pp. 381-386.
  ISSN: 1662-9752

  
  

  17. Z.S. Nikolic, Computer Simulation of Grain Coarsening during Liquid Phase Sintering, Materials Science Forum, Vol. 494, 2005, pp. 387-392.
  ISSN: 1662-9752

  
  

  16. Z.S. Nikolić, Kompjutersko proučavanje sinterovanja u prisustvu tečne faze - Rearanžiranje u vremenskom domenu, Nauka-Tehnika-Bezbednost 13(2) (2003) 89-94.
  ISSN: 0353-5517

  
  

  15. M.M. Ristic, Z.S. Nikolic, W.J. Huppmann, G. Petzow, A Contribution to Study of Liquid Phase Sintering, Bulletin t. LXXVII de l'Academie Serbe des Sciences et des Arts, Classe des Sciences Techniques, Beograd, 18, pp. 33-44 (1981).

  
  

  14. Z.S. Nikolic and M.M. Ristic, Modeling and Computer Simulation of Diffusion Process During Liquid Phase Sintering (Invited Paper), Facta Universitatis, Series: Mechanics, Automatic, Control and Robotics, University of Niš, Vol. 2, No 7, 1997 pp. 223-239.

  
  

  13. Z.S. Nikolić, M.M. Ristić, Opšti simulacioni model sinterovanja u prisustvu tečne faze, Hemijski pregled, God. 37, broj 3-4, str. 51-59 (1996).
  ISSN: 0440-6826

  
  

  12. V. V. Mitic, Z.S. Nikolic and Lj. Zivkovic, The Frequent and Ferroelectric BaTiO3-Ceramics Characteristics, Facta Universitatis, Series: Electronics and Energetics, University of Niš, Vol. 9, No. 2 (1996), 255-262.

  
  

  11. V. Mitic, Z.S. Nikolic, B. Jordovic, Statistical Analysis of the Influence of Additives on Microstructural Characteristics of BaTiO3 Ceramics, Acta Stereologica, 15/3, 1995, pp. 411-17.
  ISSN: 0351-580

  
  

  10. M.M. Ristic, Z.S. Nikolic, S.M. Radic, Generating of Active Centres on SnO2 Surface by Mechanochemical Activation, Facta Universitatis, Series: Electronics and Energetics, University of Niš, Vol. 5, No. 1, 51-56 (1992).

  
  

  9. V. Mitić, Z. Nikolić, Uticaj temperature sinterovanja na dielektrične karakteristike BaTiO3-keramike, Hemijski pregled, Beograd, God. XXXIII, 5-6, str. 99-103 (1992).
  ISSN: 0440-6826

  
  

  8. Z. Nikolić, Primena računara u simulaciji vremenski zavisnih procesa, Hemijska industrija, Beograd, 43 (7-8), str. 223-225 (1989)
  ISSN: 0367-598X

  
  

  7. M. Miloševski, Z. Nikolić, M.M. Ristić, Presuvanje na aktivni molibdenski pravovi, Glasnik na hemičarite i tehnolozite na Makedonija, 4, str. 31-38 (1983).

  
  

  6. Z. Nikolić, M.M. Ristić, Matematičko-fizička analiza nekih kinetičkih jednačina sinterovanja, Hemijska industrija, Beograd, 34, str. 143-146 (1980).
  ISSN: 0367-598X

  
  

  5. Z. Nikolić, M. Ristić, Matematički postupak za analizu makrokinetike sinterovanja, Hemijska industrija, Beograd, 33, str. 11-12 (1979).
  ISSN: 0367-598X

  
  

  4. Z. Nikolić, M. Ristić, D. Badnjarević-Vukičević, Prilog proučavanju presovanja sistema Cu-Al2O3, Hemijska industrija, Beograd, 33, str. 104-105 (1979).
  ISSN: 0367-598X

  
  

  3. Z. Nikolić, Prilog proučavanju uticaja ravnomernog pritiska na deo površine emitora na karakteristike tranzistora, Tehnika-elektrotehnika, 4, str. 7-8 (1978).

  
  

  2. Z. Nikolić, S. Ristić, Dijagrami raspodele koeficijenata strujnog pojačanja tranzistora, Tehnika-elektrotehnika, 12, str. 12-13 (1977).

  
  

  1. Z.S. Nikolić, Binarni granični dijagrami, Praksa, Beograd, 10, str. 29-30 (1977). 

• Radovi na naučnim skupovima međunarodnog značaja:

  97. V. Miltenović, Z. Nikolić, M. Milojković, S. Perić, M. Milovanović, and M. Spasić, Role and Importance of Digital Technologies in the Development of Smart Products, Proceedings of the XVI International Conference on Systems, Automatic Control and Measurements - SAUM 2022, Niš, Serbia, November 17th-18th, 2022, pp. 81-86.
  ISBN 978-86-6125-258-7

  
  

  96. B.M. Randjelovic, Z.S. Nikolic and V.V. Mitic, Gravity-induced skeletal structure evolution - an approach based on graph theory (Keynote Lecture KN), Advanced Ceramics and Applications IX: New Frontiers in Multifunctional Material Science and Processing, Book of Abstracts, Eds. V. Mitić, L. Mančić, N. Obradović, Belgrade, Serbian Ceramic Society, 20-21 September 2021, p. 29-30. 
  ISBN 978-86-915627-8-6

  
  

  95. B. M. Randjelovic and Z. S. Nikolic, Graph-theory applied to the solid skeleton evolution in sintering, PHYSICAL CHEMISTRY 2021, 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry PC2021, Proceedings, Volume II, 2021, 373-376
  ISBN 978-86-82475-39-2

  
  

  94. B. M. Randjelovic and Z. S. Nikolic, A numerical approach to estimate intergranular capacitance in ceramic sintering, Ibid., pp. 377-379.

  
  

  93. Z.S. Nikolic, Systematic investigation of grain aggregation induced by neck evolution under sintering conditions (Keynote Lecture KN 9), Advanced Ceramics and Applications VIII: New Frontiers in Multifunctional Material Science and Processing, Book of Abstracts, Eds. V. Mitić, L. Mančić, N. Obradović, Belgrade, Serbian Ceramic Society, 23-25 September 2019, p. 31
  ISBN 978-86-915627-7-9

  
  

  92. B.M. Randjelović and Z.S. Nikolić, Graph theory applied to modeling and simulation of microstructure evolution in sintering (Invited Lecture INV-MS 3), Advanced Ceramics and Applications VIII: New Frontiers in Multifunctional Material Science and Processing, Book of Abstracts, Eds. V. Mitić, L. Mančić, N. Obradović, Belgrade, Serbian Ceramic Society, 23-25 September 2019, p. 38
  ISBN 978-86-915627-7-9

  
  

  91. Z.S. Nikolić, Assumptions for implementation of social engagement at the University of Niš, Conference on the third mission of the university, 23-24 November 2018, Belgrade, Proceedings, pp. 157-163.
  ISBN 978-86-81037-58-4

  
  

  90. Z.S. Nikolic, Modeling of intergranular micro-capacitance as a function of neck growth during ceramic sintering, PHYSICAL CHEMISTRY 2018, 14th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Proceedings Volume II, Belgrade, September 24-28, 2018, pp. 601-604.
  ISBN 978-86-82475-37-8

  
  

  89. Z.S. Nikolic and V.V. Mitic, Time-dependent Intergranular Capacitance Induced by Solid Skeletal Structure Evolution (Keynote Lecture KN-MS 1), Advanced Ceramics and Applications VII: New Frontiers in Multifunctional Material Science and Processing, Book of Abstracts, Eds. V. Mitić, L. Mančić, N. Obradović, Belgrade, Serbian Ceramic Society, 17-19 September 2018, p. 46-47
  ISBN 978-86-915627-6-2

  
  

  88. Z.S. Nikolic, Theiretical study of skeletal structure evolution during liquid phase sintering (Keynote Lecture), Advanced Ceramics and Applications VI: New Frontiers in Multifunctional Material Science and Processing, Book of Abstracts, Eds. V. Mitić, L. Mančić, N. Obradović, Belgrade, Serbian Ceramic Society, 2017, p. 34
  ISBN 978-86-915627-5-5

  
  

  87. V.V. Mitic, Z. Nikolic, L. Kocic, V. Vuckovic, Fractal Nature in Ceramics Structure and New Modelling and Simulation Methods, CERMODEL2017, Modeling and Simulation meet Innovation in Ceramics Technology, July 26-28, 2017, Trento, Italy, Book of Abstracts, I9, p. 22.

  
  

  86. Z.S. Nikolic, Simulation of liquid migration during liquid phase sintering, PHYSICAL CHEMISTRY 2016, 13th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Proceedings Volume II, Belgrade, September 26-30, 2016, pp. 529-532.
  ISBN 978-86-82475-33-0

  
  

  85. Z.S. Nikolic and K. Shinagawa, Simulation of grain coarsening within pendular and capillary liquid bridges, PHYSICAL CHEMISTRY 2016, 13th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Proceedings Volume II, Belgrade, September 26-30, 2016, pp. 533-536.
  ISBN 978-86-82475-33-0

  
  

  84. Z.S. Nikolic, Modeling Liquid Bridge Rupture Induced by Grain Rearrangement (Keynote Lecture), Advanced Ceramics and Applications V: New Frontiers in Multifunctional Material Science and Processing, Book of Abstracts, Eds. V. Mitić, L. Mančić, N. Obradović, Belgrade, Serbian Ceramic Society, 2016, p. 27
  ISBN 978-86-915627-4-8

  
  

  83. T. Andjelkovic, D. Andjelkovic, Z.S. Nikolic, The Impact of E-learning in Chemistry Education, The Sixth International Conference on e-Learning, eLearning-2015, Belgrade, Serbia, 24-25 September, 2015, Proceedings p. 116-120.

  
  

  82. Z.S. Nikolic, Computer Simulation of Liquid Redistribution induced by Rearrangement during Liquid Phase Sintering (Keynote Lecture), The Fourth Serbian Ceramic Society Conference »Advanced Ceramics and Application IV« September 21-23, 2015, Serbian Academy of Sciences and Arts, Belgrade, Serbia, Book of Abstracts, p. 37.
  ISBN 978-86-915627-3-1

  
  

  81. V.V. Mitic, Lj.M. Kocic, Z.S. Nikolic, The pores fractal nature influence on integral capacity (Invited Lecture), The Fourth Serbian Ceramic Society Conference »Advanced Ceramics and Application IV« September 21-23, 2015, Serbian Academy of Sciences and Arts, Belgrade, Serbia, Book of Abstracts, p. 50.
  ISBN 978-86-915627-3-1

  
  

  80. Z.S. Nikolic and K. Shinagawa, Computer Simulation of Grain Coarsening Due to Diffusion and Deformation in Liquid Bridge (Keynote Lecture), The Third Serbian Ceramic Society Conference »Advanced Ceramics and Application III« September 29-October 1, 2014, Serbian Academy of Sciences and Arts, Belgrade, Serbia, Book of Abstracts, p. 47.
  ISBN 978-86-915627-2-4

  
  

  79. Z.S. Nikolic and K. Shinagawa, Computer Study of Grain Coarsening due to Diffusion within Capillary Liquid Bridge, 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry-PHYSICAL CHEMISTRY 2014, September 22-26, 2014, Belgrade, Serbia, Vol. 1, pp. 635-638.
  ISBN 978-86-82475-30-9

  
  

  78. Z.S. Nikolic and K. Shinagawa, Computer Simulation of Grain Coarsening Due to Diffusion and Deformation in Liquid Bridge (Keynote Lecture), The Third Serbian Ceramic Society Conference »Advanced Ceramics and Application III« September 29-October 1, 2014, Serbian Academy of Sciences and Arts, Belgrade, Serbia, Book of Abstracts, p. 47.
  ISBN 978-86-915627-2-4.

  
  

  77. Z.S. Nikolic, Computer Study of Static and Dynamic Rearrangement in Liquid Phase Sintering (Plenary Lecture), Advanced Ceramics and Applications II: New Frontiers in Multifunctional Material Science and Processing, Book of Abstracts, Serbian Ceramic Society, Belgrade, 30th September-1st October, 2013, p.4.
  ISBN 978-86-915627-1-7

  
  

  76. K. Shinagawa and Z.S. Nikolic: Finite Element Analysis of Diffusion and Deformation in Liquid Bridge between Powder Particles, Abstract Book (DVD) of 25th Fall Meeting of The Ceramic Society of Japan, September 19-21, 2012, Nagoya University (Higashiyama Campus), Japan, 3D03.
  ISBN 978-4-931298-62-0 C3058

  
  

  75. Z.S. Nikolic and K. Shinagawa, A Model for Computer Study of Grain Coarsening in Liquid Phase Sintering, Proc. 11th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2012, September 24-28, Belgrade, Serbia, Vol. 1, pp. 483-485.
  ISBN 978-86-82475-27-9

  
  

  74. Z.S. Nikolic and K. Shinagawa, Computer Study of Rearrangement Driven by Capillary and Viscous Forces in Liquid Phase Sintering, Proc. 11th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2012, September 24-28, Belgrade, Serbia, Vol. 1, pp. 486-488.
  ISBN 978-86-82475-27-9

  
  

  73. Z.S. Nikolic and K. Shinagawa, Computer Study of Liquid Bridge Rupture during Rearrangement in Liquid Phase Sintering, Proc. 11th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2012, September 24-28, Belgrade, Serbia, Vol. 1, pp. 489-491.
  ISBN 978-86-82475-27-9

  
  

  72. Z.S. Nikolic, Three-dimensional computer simulation of some phenomena during liquid phase sintering, 2011 Annual Spring Meeting of the Japan Institute of Metals, March 25 to 27, 2011, Collected Abstracts, Presentation No. 601, p. 362. 
  ISSN 1342-5730

  
  

  71. Z.S. Nikolic and F. Wakai, Computer simulation of three-dimensional rearrangement during liquid phase sintering, Proc. 10th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2010, September 21-24, 2010, Belgrade, Serbia, pp. 405-407.
  ISBN 978-86-82475-17-0

  
  

  70. Z.S. Nikolic and M. M. Ristic, Computer simulation of three-dimensional skeletal structure evolution during sintering, Proc. 10th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2010, September 21-24, 2010, Belgrade, Serbia, pp. 408-410.
  ISBN 978-86-82475-17-0

  
  

  69. Z.S. Nikolic, M. M. Ristic, K. Shinagawa, Three-Dimensional Computer Simulation Of Time-Dependent Skeletal Structure Evolution During Liquid Phase Sintering, The 3rd International Congress on Ceramics (ICC3), Nov. 14-18, 2010/Osaka, Japan (Symposium 1: Advanced Structure Analysis and Characterization of Ceramic Materials).

  
  

  68. Z.S. Nikolic, F. Wakai, Computer Study of Liquid Phase Sintering – Three-Dimensional Time Dependent Rearrangement, The 3rd International Congress on Ceramics (ICC3), Nov. 14-18, 2010/Osaka, Japan (Symposium 1: Advanced Structure Analysis and Characterization of  Ceramic Materials).

  
  

  67. Z.S. Nikolic, Numerical method for computer study of liquid phase sintering: densification due to gravity induced skeletal settling, Intern. Conf. Aproximation & Computation (APP&COM 2008) Dedicated to 60th anniversary of Prof. Gradimir V. Milovanovic, August 25-29, 2008, Book of Abstracts, pp. 27-28.

  
  

  66. Z.S. Nikolic, Three-dimensional Computer Study of Skeletal Settling during Liquid Phase Sintering, 9th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2008, September 24-26, 2008, Belgrade, Serbia, pp. 494-496.
  ISBN 978-86-82475-13-2

  
  

  65. Z.S. Nikolic and M. Yoshimura, An Improved Model for Simulation of Rapid Solidification from Undercooled Melt, 9th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2008, September 24-26, 2008, Belgrade, Serbia, pp. 515-517.
  ISBN 978-86-82475-13-2

  
  

  64. T. Ishigaki, Z.S. Nikolic, T. Watanabe, N. Matsushita, M. Yoshimura, Lattice energy calculation for quantitatively-modeled Perovskite distortion, The 2nd International Conference on Physics of Solid State Ionics, Dec 16-19, 2007, Suzukakedai Campus, Tokyo Institut of Technology (Yokohama), Japan.

  
  

  63. Z.S. Nikolic, Liquid Phase Sintering - I. Computer Study of Skeletal Settling and Solid Phase Extrication in Normal Gravity Environment, VII Scientific Meeting "Physics and Technology of Materials, FITEM '07, Eds. G. Stanisic, V.B. Pavlovic and A.M. Maricic, Čačak/Serbia, 2007, pp. 16-17.

  
  

  62. Z.S. Nikolic, Liquid Phase Sintering - II. Computer Study of Skeletal Settling and Solid Phase Extrication in Microgravity Environment, VII Scientific Meeting "Physics and Technology of Materials, FITEM '07, Eds. G. Stanisic, V.B. Pavlovic and A.M. Maricic, Čačak/Serbia, 2007, p. 17.

  
  

  61. Z.S. Nikolic and M. Yoshimura, Two-dimensional heat transfer model for rapid solidification of ceramics alloys, The 3rd International Symposium on Advanced Ceramics (ISAC-3) - Innovation of Ceramic Science and Engineering - December 11-15, 2006, Singapore (Session Advanced Processing of Ceramics: Sintering, No.: I12-A10), p. 367.

  
  

  60. Z.S. Nikolic, Computer study of skeletal settling combined with extrication of solid phase domains during liquid phase sintering of tungsten heavy alloy, The 3rd International Symposium on Advanced Ceramics (ISAC-3) - Innovation of Ceramic Science and Engineering - December 11-15, 2006, Singapore  (Session Advanced Processing of Ceramics: Sintering, No.: I12-A11), pp. 367-368.

  
  

  59. Z.S. Nikolic, An extended finite difference method for study of liquid phase sintering of tungsten heavy alloy in gravity and microgravity environments (Plenary Lecture), Collected Abstracts, 2006 Autumn Meeting of the Japan Institute of Metals, Niigata, Japan, September 16-18, 2006 (Session Powder Metallurgy/Sintering Technology, p. 236).

  
  

  58. Z.S. Nikolic and M. Yoshimura, Theoretical Study of Solidified Sample Influenced by Melt Superheat, Proc. of the 8th International Conference on Fundamental and Applied Aspect of Physical Chemistry - PHYSICAL CHEMISTRY 2006, Belgrade, Serbia, September 26-29, 2006, pp. 489-491.
  ISBN 86-82139-26-X

  
  

  57. Z.S. Nikolic and M. Yoshimura, Numerical Prediction of Heat Transfer between Sample and Substrate during Rapid Solidification, Proc. of the 8th International Conference on Fundamental and Applied Aspect of Physical Chemistry - PHYSICAL CHEMISTRY 2006, Belgrade, Serbia, September 26-29, 2006, pp. 492-494.
  ISBN 86-82139-26-X

  
  

  56. Z.S. Nikolic, Modeling Pore Growth by Coalescence for Computer Study of Liquid Phase Sintering, Proc. of the 8th International Conference on Fundamental and Applied Aspect of Physical Chemistry - PHYSICAL CHEMISTRY 2006, Belgrade, Serbia, September 26-29, 2006, pp. 495-497.
  ISBN 86-82139-26-X

  
  

  55. Z.S. Nikolic, Experimental and Theoretical Study of Pore Evolution during Liquid Phase Sintering under Gravity and Microgravity Conditions, 35th Dr. Wagener Memorial Lectures, Tokyo Institute of Technology, Suzukakedai Campus, September 4, 2006.

  
  

  54. Z.S. Nikolic, Computer simulation of liquid phase sintering for porous structure, Proc. of 7th International Conference on Fundamental and Applied Aspects of Physical Chemistry, PHYSICAL CHEMISTRY 2004, 21-23 September 2004, Belgrade, Vol. II, pp. 565-567, Ed. by A. Antic-Jovanovic and S. Anic, Society of Physical Chemists of Serbia, Belgrade.
  ISBN 86-82457-12-x

  
  

  53. Z.S. Nikolic, M. Yoshimura and S. Araki, Simulation of rapid solidification of alumina on a metallic substrate, Proc. of 7th International Conference on Fundamental and Applied Aspects of Physical Chemistry, PHYSICAL CHEMISTRY 2004, 21-23 September 2004, Belgrade, Vol. II, pp. 568-570, Ed. by A. Antic-Jovanovic and S. Anic, Society of Physical Chemists of Serbia, Belgrade.
  ISBN 86-82457-12-x

  
  

  52. Z.S. Nikolic, 3-D Simulation of Rearrangement during Liquid Phase Sintering, Proc. of 7th International Conference on Fundamental and Applied Aspects of Physical Chemistry, PHYSICAL CHEMISTRY 2004, 21-23 September 2004, Belgrade, Vol. II, pp. 571-573, Ed. by A. Antic-Jovanovic and S. Anic, Society of Physical Chemists of Serbia, Belgrade.
  ISBN 86-82457-12-x

  
  

  51. Z.S. Nikolic, M. Yoshimura and S. Araki, 2-D Computer Simulation of Rapid Solidification, Sixth Yugoslav Materials Research Society Conference, YUCOMAT 2004, Herceg-Novi, Serbia and Montenegro, September 13-17, 2004, p. 8.

  
  

  50. Z.S. Nikolic, Computer Simulation of Grain Coarsening During Liquid Phase Sintering, Sixth Yugoslav Materials Research Society Conference, YUCOMAT 2004, Herceg-Novi, Serbia and Montenegro, September 13-17, 2004, p. 65.

  
  

  49. Z.S. Nikolic, 3-D Visualization of Liquid Bridge during Liquid Phase Sintering, Proc. of the X WRTCS, Science of Sintering: Current Problems and New Trends, Serbian Academy of Sciences and Arts, Beograd, 2003, pp. 13-20.

  
  

  48. Lj. Zivkovic, Z. Nikolic, S. Boskovic and M. Miljkovic, Structural and Percolative Properties of Electroconductive Si3N4-TiN Ceramics, Proc. of the X WRTCS, Science of Sintering: Current Problems and New Trends, Serbian Academy of Sciences and Arts, Beograd, 2003, pp. 485-492.

  
  

  47. Z.S. Nikolic and G. Tomandl, Computer Study of Capillary Forces and Rearrangement during Initial Stage of Liquid Phase Sintering, The 8th IUMRS International Conference on Advanced Materials, Abstracts 2, Symposia: Category C & D (2nd International Conference on Materials Processing for Properties and Performance, D8-13-O09, p. 256), October 11-13, 2003, Yokohama, Japan.

  
  

  46. Z.S. Nikolic, Numerical Model for 3-D Visualization of Liquid Phase Sintering Rearrangement, Proc. 1st International Workshop for Advanced Ceramics promoted by the JSPS 124th Committee on High-Temperature Ceramic Materials, November 7-8, 2003, Atami City, Shizuoka, Japan, p. 146.

  
  

  45. Z.S. Nikolic, A Numerical Model for Sintering Process Parameter Prediction, XVth International Symposium on the Reactivity of Solids ISRS 2003, Kyoto, Japan, November 09-13, 2003, p.132.

  
  

  44. Z.S. Nikolic, 2-D Visualization of Liquid Bridge during Liquid Phase Sintering, Proc. of the 6th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2002, September 26-28, 2002, Belgrade, Vol. II, pp. 499-501.

  
  

  43. Z.S. Nikolic, 3-D Visualization of Liquid Bridge during Liquid Phase Sintering, Proc. of the 6th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2002, September 26-28, 2002, Belgrade, Vol. II,pp. 502-504.

  
  

  42. Z.S. Nikolic, Random Rotation and Translation and Liquid Phase Sintering Under Microgravity Condition, Proc. of the 5th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2000, September 27-29, 2000, Belgrade, pp. 384-386, Ed. by S. Ribnikar and S. Anic, Society of Physical Chemists of Serbia, Belgrade.

  
  

  41. Z.S. Nikolic, Random Translation and Liquid Phase Sintering Under Earth-based Condition, Proc. of the 5th International Conference on Fundamental and Applied Aspects of Physical Chemistry - PHYSICAL CHEMISTRY 2000, September 27-29, 2000, Belgrade, pp. 411-413, Ed. by S. Ribnikar and S. Anic, Society of Physical Chemists of Serbia, Belgrade.

  
  

  40. Z.S. Nikolic, Simulation of Intergranular Impedance as a Function of Diffusion Processes, Proc. of the Small Systems Simulation Symposium 2000, 4.-5. September 2000, Faculty of Electronic Engineering, Niš, Yugoslavia, pp. 9-12.

  
  

  39. Z.S. Nikolic, I. Mitrovic, V.V. Mitic and M.M. Ristic, Computer Simulation of Neck Growth During the Sintering Process, Recent Trends in Science and Technology of Sintering, Book of Abstracts, Eds. M.M. Ristic and M.V. Nikolic, IX World Round Table Conference on Sintering, Beograd, 1998 (Fundamental Trends in Sintering, Paper No. FUN.P8, p. 17).

  
  

  38. Z.S. Nikolic and M.M. Ristic, A Model for Liquid Phase Sintering Under Microgravity Conditions, Adv. Sci. Technol. (Faenza, Italy) 1999, 14, 9th CIMTEC - World Ceramics Congress, Ceramics: Getting into the 2000's - Part B, ed. P. Vincenzini, Techna Srl., 1999, pp. 791-798.

  
  

  37. Z.S. Nikolic, V.V. Mitic, I.Z. Mitrovic, B. Jordovic, A New Model for Determination of Grain Growth Kinetics, Proc. of International Conference on Stereology, Spatial Statistics and Stochastic Geometry, Eds. V. Benes, J. Janacek and I. Saxl, Prague, Czech Republic, June 21-24, 1999, pp. 221-226.

  
  

  36. Z.S. Nikolic, V.V. Mitic, and I.Z. Mitrovic, Modeling of Intergranular Impedance as a Function of Consolidation Parameters, TELSIKS '99, Proc. of 4th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting Services, Vol. 2, Nis, 1999, pp. 673-676.

  
  

  35. Z.S. Nikolic and M.M. Ristic, Computer Modeling of Liquid Phase Sintering Under Microgravity Experimental Conditions, PHYSICAL CHEMISTRY '98, Proc. of 4th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 23-25, 1998, Belgrade, pp. 401-403.

  
  

  34. Z.S. Nikolic and M.M. Ristic, Computer Modeling of Liquid Phase Sintering Under Earth-based Experimental Conditions, PHYSICAL CHEMISTRY '98, Proc. of 4th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 23-25, 1998, Belgrade, pp. 431-433.

  
  

  33. Z.S. Nikolic and M.M. Ristic, Computer Simulation of 2-D Microstructures During Liquid Phase Sintering, 1998 Powder Metallurgy World Congress, Granada, Spain, October 18-22, Proceedings, Vol. 2, pp. 330-335.

  
  

  32. Z.S. Nikolic, Computer Simulation of Gravitational Effects on Grain Coarsening During Liquid Phase Sintering, in Advances in Science and Technology 18, Proc. of Topical Symposium I on "Computational Modeling and Simulation of Materials" of the Forum on New Materials, part of the 9th CIMTEC - World Ceramics Congress & Forum on New Materials, Florence, Italy, June 14-19, 1998.

  
  

  31. Z.S. Nikolic, V.V. Mitic, Lj. Kocic, M.M. Ristic, Computer Modeling of Microstructure-Properties of Barium Titanate Ceramics, ICAM/E-MRS'97 Spring Meeting, Strasbourg, France, June 16-20, 1997, Book of Abstracts, p. D-29 (Symposium D, Paper No D-I/P43).

  
  

  30. V.V. Mitic, Z.S. Nikolic, Lj. Kocic, M.M. Ristic, Computer Modeling of Dielectric Properties of Barium Titanate Ceramics, ICAM/E-MRS'97 Spring Meeting, Strasbourg, France, June 16-20, 1997, Book of Abstracts, p. D-32 (Symposium D, Paper No D-II/P8).

  
  

  29. V.M. Minic, Z.S. Nikolic and M.M. Ristic, Sintering of Fe, Ni and Co using Sintering Diagrams, PM-97 Intern. Conf. "Novel Processes and Materials in Powder Metallurgy, Abstracts, Kiev, 1997, p. 177.

  
  

  28. Z.S. Nikolic, R.M. Spriggs, V.R.W. Amarakoon and M.M. Ristic, Computer Simulation of Boundary Migration During Liquid Phase Sintering, 98th Annual Meeting of the American Ceramic Society, Indianapolis, IN, April 15, 1996 (Computational Modeling of Materials and Processing Symposium, Paper No. SX-6-96).

  
  

  27. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, Computer-Aided Design of Liquid Phase Sintering, Sintering and Materials, ed. Li Nan, Proc. of the Sixth International Symposium on the Science and Technology of Sintering, October 23-25, 1995, Haikou, International Academic Publishers, Beijing, China, 1995, pp. 15-19.
  ISBN: 7-0003-348-1/TB 29

  
  

  26. S.M. Radic, M.V. Nikolic, Z.S. Nikolic, General Aspects of the Application of Computers in the Investigation of the Sintering Process, Proc. of the Sixth International Symposium on the Science and Technology of Sintering, October 23-25, 1995, Haikou, International Academic Publishers, Beijing, China, 1995, pp. 25-29.
  ISBN: 7-0003-348-1/TB 29

  
  

  25. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, Modeling, Simulation and Sintering Process Prognosis, Proc. of the Sixth International Symposium on the Science and Technology of Sintering, October 23-25, 1995, Haikou, International Academic Publishers, Beijing, China, 1995, pp. 30-34.
  ISBN: 7-0003-348-1/TB 29

  
  

  24. Lj. Zivkovic, V. Mitic, Z. Nikolic, M. Miljkovic, Influence of Pressing Pressure on the Permitivity Response in BaTiO3, Proc. of the Sixth International Symposium on the Science and Technology of Sintering, October 23-25, 1995, Haikou, International Academic Publishers, Beijing, China, 1995, pp. 256-261.
  ISBN: 7-0003-348-1/TB 29

  
  

  23. V.V. Mitic, Z.S. Nikolic, M.M. Ristic, The Influence of Some Technological Parameters on Hysteresis Characteristics of BaTiO3-Ceramics, Proc. of the Sixth International Symposium on the Science and Technology of Sintering, October 23-25, 1995, Haikou, International Academic Publishers, Beijing, China, 1995, pp. 525-530.
  ISBN: 7-0003-348-1/TB 29

  
  

  22. V.V. Mitic, Z.S. Nikolic, M.M. Ristic, Modeling of Microstructural and Electrical Characteristics of Barium-Titanate, Proc. of the Sixth International Symposium on the Science and Technology of Sintering, October 23-25, 1995, Haikou, International Academic Publishers, Beijing, China, 1995, pp. 531-535.
  ISBN: 7-0003-348-1/TB 29

  
  

  21. Z.S. Nikolic, V.R.W. Amarakoon, R.M. Spriggs, M.M. Ristic, Computer Modeling of Liquid Phase Sintering in Ceramics, 97th Annual Meeting of the American Ceramic Society, Cincinnati, Ohio, 1995, Abstracts (Paper No. SVII-35-95).

  
  

  20. Z.S. Nikolic, V.R.W. Amarakoon, R.M. Spriggs, M.M. Ristic, Numerical Simulation of Grain Growth Kinetics during Liquid Phase Sintering, 97th Annual Meeting of the American Ceramic Society, Cincinnati, Ohio, 1995, Abstracts (Paper No. SVII-36-95).

  
  

  19. V.V. Mitic, Z.S. Nikolic, M.M. Ristic, The Influence of Pressing Pressure of Ferroelectric Characteristics of BaTiO3-Ceramics, 97th Annual Meeting of the American Ceramic Society, Cincinnati, OH, 1995, Abstracts (Paper No. EP-34-95, p. 352).

  
  

  18. V.V. Mitic, Z.S. Nikolic, A.M. Gokhale, M.M. Ristic, Electric Characteristics of Barium Titanate Ceramics as a Function of Grain Size Distribution, 97th Annual Meeting of the American Ceramic Society, Cincinnati, OH, 1995, Abstracts (Paper No. E-77-95, p. 361).

  
  

  17. B. Jordovic, V. Mitic, Z. Nikolic, Effects of Sintering Time and Temperature on BaTiO3-Ceramic Microstructural Characteristics, Acta Stereologica, Proc. 6ECS Prague 1993, 13/2, 381-388 (1994)
  ISSN: 0351-580X

  
  

  16. V. Mitic, Z. Nikolic, B. Jordovic, Lj. Zivkovic, The Influence of the Pressing Pressure on Electrical Characteristics of BaTiO3-Ceramics by Applying Quantitative Microscopy Methods, Acta Stereologica, Proc 6ECS Prague 1993, 13/2, 395-400 (1994).
  ISSN: 0351-580X

  
  

  15. V. Mitic, Z.S. Nikolic, B. Jordovic, Statistical Analysis of the Influence of Additives on Microstructural Characteristics of BaTiO3 Ceramics, Proc. IV International Conference on "Stereology and Image Analysis in Materials Science, STERMAT '94, Beskidy Mountains, Poland, October 3-6, 1994, pp. 375-380.

  
  

  14. Z. Nikolic, M.V. Nikolic, S.M. Radic, Reaction Sintering of the ZnO-B2O3 System, 2nd Symposium of Physical-Chemical Society "Physical Chemistry '94, Abstracts, Beograd, September 26-28, 1994, pp. 197-198.

  
  

  13. V. Mitic, Z.S. Nikolic, The Influence of the Sintering Pressure on Hysteresis Characteristics of BaTiO3-Ceramics, 2nd Symposium of Serbian Chemical Society on Ceramics and Glass "Physics, Chemistry and Technology of Ceramics and Glass, Arandjelovac, 21-23 September 1994, Serbian Chemical Society, Beograd, 1994, pp. 295-296.

  
  

  12. V.V. Mitic, Z.S. Nikolic, M.M. Ristic, Changes of Electrical Characteristics of Barium Titanate Ceramics by Adding Some Impurities, Proc. of 2nd Serbian Conf. on Microelectronics and Optoelectronics MIOPEL 93, Nis, October 26-28, 1993, pp. 355-359.

  
  

  11. V. Mitic, Z.S. Nikolic, D. Stefanovic, M.M. Ristic, Modeling of Electrical Characteristics of BaTiO3 - Ceramics, Diffus. Defect Data, Sintering '91, Ed. by A.C.D. Chaklader and J.A. Lund, Proc. of the Fifth International Symposium on the Science and Technology of Sintering, July 23-26, 1991, Vancouver, Ed. by A.C.D. Chaklader and J.A. Lund, 1992 Trans Tech Publications Ltd., Solid State Phenomena, Vol. 25 & 26 (1992) pp. 603-610.
  DO: 10.4028/www.scientific.net/SSP.25-26.6
  ISBN: 0-87849-638-6
  ISSN: 1012-0394

  
  

  10. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, Prognosis of Sintering of System W-Ni in the Presence of Liquid Phase, Science of Sintering, New Direction for Materials Processing and Micro-Structural Control, Ed. by D.P. Uskokovic, H. Palmour III and R.M. Spriggs, Proceedings VII World Round Table Conference on Sintering, Herceg Novi, August 28 - September 1, 1989, Plenum Press, New York, 1990, pp. 235-242.

  
  

  9. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, An Information System of Quality Control of Technological Processes in Powder Metallurgy, Horizonts of Powder Metallurgy, Ed. by W.A Kayser and W.J Huppmann, Proceedings of the 1986 International Powder Metallurgy Conference and Exhibition on "The Future of Powder Metallurgy, PM'86, Duesseldorf, Germany, July 7-11, 1986, pp. 769-772.

  
  

  8. Z.S. Nikolic, M.M. Ristic, Computer Simulation and Experimental Investigation of the Sintering of the W-Ni System, Proceedings of the 10th Plansee-Seminar 1981 "Trends in Refractory Metals, ed. H.M. Ortner, Metallwerk, Plansee GmbH, Reutte, Austria, 1981, 2, pp. 259-268.

  
  

  7. Lj.M. Zivkovic, Z.S. Nikolic, M.M. Ristic, The Application of Sintering Diagrams to the Sintering of Alumina Gels, Proceedings of the 11th International Conference "Science of Ceramics, Sweden, June 14-17, 1981, 11, pp. 257-264.

  
  

  6. Z.S. Nikolic, M.M. Ristic, W.J. Huppmann, A Simple Method for Computer Simulation of Liquid Phase Sintering, Modern Developments in Powder Metallurgy, Ed. by H.H. Hausner, H.W. Antes and G.D Smith, Proceedings of the 1980 International Powder Metallurgy Conference, Washington, June 22-27, 1980, 12, Principles and Processes, pp. 497-502.

  
  

  5. Z.S. Nikolic, M.M. Ristic, Mathematical-Physical Analysis of Some Kinetics Equations of Sintering, Contemporary Inorganic Materials 1979, Ed. by I. Stamenkovic and M. Mitkov, Proceedings of the 4th Yugoslav-German Meeting on Materials Science and Development, Arandjelovac, Yugoslavia, October 3-5, 1979, pp. 26-34.

  
  

  4. Z.S. Nikolic, M.M. Ristic, Application of Numerical Method for Grain Growth Analysis during Liquid Phase Sintering, 2nd International Summer School on Sintered Materials "Synthetic Materials for Electronics", Abstracts, Jachranka near Warsaw, Poland, October 7-11, 1979, p. 23.

  
  

  3. M. Milosevski, Z. Nikolic, V. Mikijelj, M.M. Ristic, A Contribution to the Study of Active Molybdenum Powders Pressing Process, 2nd International Summer School on Sintered Materials "Synthetic Materials for Electronics", Abstracts, Jachranka near Warsaw, Poland, October 7-11, 1979, p. 23.

  
  

  2. Lj. Nikolic, Z. Nikolic, M.M. Ristic, The Role of Surface Diffusion during the Sintering of Al2O3 - Gels, 2nd International Summer School on Sintered Materials "Synthetic Materials for Electronics, Abstracts, Jachranka near Warsaw, Poland, October 7-11, 1979, p. 23.

  
  

  1. D. Uskokovic, Z. Nikolic, M.M. Ristic, The Analysis of the Sintering Process on the Basis of Sintering Maps, Contemporary Inorganic Materials 1978, Ed. by G. Petzow and W.J. Huppmann, Proc. of the 3rd German-Yugoslav Meeting on Materials Science and Development, Dr. Riederer-Verlag GmbH, Stuttgart, Germany, May 8-10, 1978, pp. 62-67.

• Radovi na domaćim naučnim skupovima:

  111. Z.S. Nikolić, Značaj digitalizacije za održivi proces internacionalizacije na Univerzitetu u Nišu, Zbornik radova, Ekspertska konferencija "DIGITALIZACIJA KULTURNE BAŠTINE U NIŠKOM REGIONU - Izazovi, iskustva, pravci daljeg razvoja", 16. maj 2019, Niš, Srbija, str. 87-97.

  
  

  110. Z.S. Nikolic, K. Shinagawa and B. Randjelovic, Computer Simulation of Diffusion Phenomena in Capillary Liquid Bridge, YU INFO 2015, Proc. of 21st Conference and Exhibition, Kopaonik March 3-8, 2015, pp. 278-283.

  
  

  109. Z.S. Nikolic, BAEKTEL platforma kao model za integraciju teorijskih i stručnih znanja na univerzitetima u Srbiji, YU INFO 2015, Zbornik radova, Kopaonik 8-11. mart 2015., str. 308-313.

  
  

  108. Z.S. Nikolic and M. Yoshimura, Computer Simulation of Liquid Phase Sintering: Densification Induced by Skeletal Settling and Extrication, ETRAN 2008, Knjiga abstrakata, Sekcija za nove materijale – NM (Rad NM1.1), p. 55

  
  

  107. V.V. Mitic, V. Tomic, J. Purenovic, Z.S. Nikolic, The Intergranular Impedance Model and BaTiO3-Ceramics Microstructure Based on Different Additives Influence, Proc. 3rd Serbian Congress for Microscopy (3SCM-2007), Belgrade, September 25-28, 2007, pp. 107-108.

  
  

  106. Z.S. Nikolic, Computer Simulation of Solid Skeleton Under Earth Based Condition During Liquid Phase Sintering, Proc. of Symposium on Computer Science and Information Technology YU Info 2005, March 7-11 2005, Kopaonik, pp. 1-6.

  
  

  105. Z.S. Nikolic and G. Tomandl, Computer Simulation of 3-D Particle Rearrangement, Proc. of Symposium on Computer Science and Information Technology YU Info 2005, March 7-11 2005, Kopaonik, pp. 1-5.

  
  

  104. Z.S. Nikolic, Computer Simulation of Pore Coalescence During Liquid Phase Sintering, Proc. of Symposium on Computer Science and Information Technology YU Info 2005, March 7-11 2005, Kopaonik, pp. 1-6.

  
  

  103. Z.S. Nikolic, Computer Simulation of Free Settling and Skeletal Settling During Liquid Phase Sintering, Sinterovanje - Fizika i fenomenologija, Ed. M.M. Ristic, Srpska akademija nauka i umetnosti, Beograd, 2005, p. 6.

  
  

  102. Z.S. Nikolic, Computer Simulation of Pore Coalescence and Solid Skeleton Formation During Liquid Phase Sintering, Seventh Yugoslav Materials Research Society Conference YUCOMAT 2005, The Book of Abstracts, Herceg-Novi, Serbia and Montenegro, September 12-16, 2005, p. 11.

  
  

  101. Z.S. Nikolic, M. Yoshimura, S. Araki and T. Fujiwara, Finite Difference Method for Computer Study of Interfacial Heat Transfer Coefficient During Rapid Solidification of Spherical Sample on Metallic Substrate, VI Scientific Meeting Physics and Technology of Materials FITEM'05, Čačak, 2005 (Session 4: Modeling and Characterization, p. 35).

  
  

  100. Z.S. Nikolic, Basic and Mixed Models for Two-Dimensional Computer Simulation of Liquid Phase Sintering of Porous Structure, VI Scientific Meeting Physics and Technology of Materials FITEM'05, Čačak, 2005 (Session 5: VI Symposium: Theory and Technology of Sintering, pp. 39-40).

  
  

  99. Z.S. Nikolic and G. Tomandl, Simulation of Liquid Meniscus Shape, YU Info 2004, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2004, pp. 1-5.

  
  

  98. Z.S. Nikolic, Simulation of Neck Growth suring Solid State Sintering, YU Info 2004, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2004,  pp. 1-6.

  
  

  97. Z.S. Nikolic, Prediction of Sintering Process Parameters by Computer Simulation, YU Info 2004, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2004, pp. 1-4.

  
  

  96. Z.S. Nikolic, Simulation of Liquid Phase Sintering for Porous Structure, YU Info 2004, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2004, pp. 1-6.

  
  

  95. Z.S. Nikolic, 2-D Computer Simulation of Capillary Forces during Liquid Phase Sintering: Two Simple Models, YU Info 2003, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2003, pp. 1-6.

  
  

  94. Z.S. Nikolic, 3-D Computer Simulation of Capillary Forces during Liquid Phase Sintering-II. Multiparticle Model, YU Info 2003, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2003, pp. 1-6.

  
  

  93. Z.S. Nikolic, 3-D Computer Simulation of Capillary Forces during Liquid Phase Sintering-I. Simple Model, YU Info 2003, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2003, pp. 1-5.

  
  

  92. Z.S. Nikolic, 2-D Computer Simulation of Rearrangement during Initial Stage of Liquid Phase Sintering, Symposium: Sintering - Theory and Technology, Serbian Academy of Sciences and Arts, Belgrade 2003, p.5.

  
  

  91. Z.S. Nikolic, Computer Simulation of Capillary Forces during Liquid Phase Sinterng, YU INFO 2002, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2002, pp. 1-4.

  
  

  90. Z.S. Nikolic, Computer simulation of shrinkage by shape accommodation during liquid phase sintering, YU INFO 2002, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2002, pp. 1-4.

  
  

  89. S. Bošković, Lj. Živković, Z. Nikolić, Lj. Vračar, M. Miljković, Mikrostrukturna i električna karakterizacija Si3N4-TiN kompozita, Zbornik radova XLVI konferencije za ETRAN, Banja Vrućica - Teslić, 4.-7. juna 2002, tom IV, str. 232-235.

  
  

  88. Z.S. Nikolic, Modeling of Grain Growth and Shape Accommodation during Liquid Phase Sintering: Concentration Profile, YU INFO 2001, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2001, pp. 1-4.

  
  

  87. Z.S. Nikolic, Modeling of Grain Growth and Shape Accommodation during Liquid Phase Sintering: Simple Model Systems, YU INFO 2001, Proc. of Symposium on Computer Science and Information Technology, Kopaonik, 2001, pp. 1-4.

  
  

  86. Z.S. Nikolić, Mogućnosti i ograničenja primene metoda modelovanja i simulacije u proučavanju procesa sinterovanja, Teorija i tehnologija sinterovanja, Ed. A.M. Maričić i M.M. Ristić, Srpska akademija nauka i umetnosti i Tehnički fakultet - Čačak, Beograd - Čačak 2001, str. 4-5.

  
  

  85. Z.S. Nikolić, Modelovanje i simulacija trijade Tehnologija-Struktura-Svojstva, Simpozijum o računarskim naukama i informacionim tehnologijama YU INFO 2000, Kopaonik, 2000, Zbornik radova, str. 1-5.

  
  

  84. Z.S. Nikolić, Modelovanje i simulacija efekta rotacije tokom tečno-faznog sinterovanja, Simpozijum o računarskim naukama i informacionim tehnologijama YU INFO 2000, Kopaonik, 2000, Zbornik radova, str. 1-5.

  
  

  83. Z.S. Nikolić, I. Mitrović, V. Brankov, Simulacija topologije mikrostruktura višečestičnim modelom, Simpozijum o računarskim naukama i informacionim tehnologijama YU INFO 2000, Kopaonik, 2000, Zbornik radova, str. 1-4.

  
  

  82. Z.S. Nikolić,, Nove obrazovne tehnologije i primena računara u univerzitetskoj nastavi, Univerzitet u Nišu, Seminar za usavršavanje saradnika Univerzitetau Nišu, Niš, maj 2000.

  
  

  81. Z.S. Nikolić, Proces sinterovanja: simulacija rasta vrata na 3-D modelima, YU Info '99, Simpozijum o računarskim naukama i informacionim tehnologijama, Zbornik radova, Kopaonik, 1999, str. 1366a-1-1366a-4.

  
  

  80. Z.S. Nikolić, Semi-numerički modeli za modelovanje i simulaciju tečno-faznog sinterovanja, YU Info '99, Simpozijum o računarskim naukama i informacionim tehnologijama, Zbornik radova, Kopaonik, 1999, str. 1366-1-1366-5.

  
  

  79. Z.S. Nikolic, Modelovanje i simulacija tečno faznog sinterovanja: fenomeni rastvaranja, difuzija i taloženje, Naučni skup Trijada sinteza-struktura-svojstva - osnova tehnologije novih materijala, Srpska akademija nauka i umetnosti, Beograd, 1999, str. 6-7.

  
  

  78. Z.S. Nikolic, Modelovanje i simulacija prostorne raspodele koncentracije polutanata u okolini izvora emisije (Predavanje po pozivu), XXIV međunarodna konferencija "Osnovna pitanja međunarodne saradnje u zaštiti od industrijskog rizika i unapređivanje kvaliteta radne i životne sredine, Niš, 4.-5. novembra 1999.

  
  

  77. Z.S. Nikolic, Modelovanje i simulacija procesa sinterovanja i njihova uloga u razvoju trijade "Sinteza-struktura-svojstva", Abstrakti sa naučnog skupa Sinterovanje i sinterovani materijali u svetlu trijade "sinteza-struktura-svojstva", ed. M. M. Ristic, Srpska akademija nauka i umetnosti, Beograd, 1998, str. 7-8.

  
  

  76. Z.S. Nikolic, Simulation of Grain Growth During Liquid Phase Sintering, Proc. of Symposium on Computer Science and Information Technology YU INFO '98, Kopaonik, 1998, pp. 542-547.

  
  

  75. Z.S. Nikolic, Simulation of Gravity Induced Microstructural Evolution During Liquid Phase Sintering, Proc. of Symposium on Computer Science and Information Technology YU INFO '98, Kopaonik, 1998, pp. 548-552.

  
  

  74. Z.S. Nikolic, Computer Simulation of Grain Boundary Migration During Liquid Phase Sintering, Proc. of Information Technology, Žabljak, March 8-16, 1997, pp. 157-160.

  
  

  73. Z.S. Nikolić, M.M. Ristić, Modelovanje i simulacija procesa primenom matematičkog formalizma (Predavanje po pozivu), Matematičke metode u mehanici, XXII Jugoslovenski kongres teorijske i primenjene mehanike JUMEH '97, Zbornik radova, Vrnjačka banja, 2-7 jun 1997, str. 177-181.

  
  

  72. Z.S. Nikolić, Modelovanje uticaja gravitacionog polja na sinterovanje u prisustvu tečne faze, Savetovanje o novim materijalima, XLI konferencija za ETRAN, Zbornik radova, Sveska IV, Zlatibor, 1997, str. 483-486.

  
  

  71. V.M. Minić, I.P Arsentjeva, Z.S. Nikolić, M.M. Ristić, Kompleksna analiza karakterističnih parametara procesa sinterovanja praha nikla, III jugoslovenska konferencija "Teorija i tehnologija sinterovanja" TEOTES '97, Čačak, 1-5. septembar 1997, Zbornik abstrakata, str. 74

  
  

  70. Z.S. Nikolic, V.V. Mitic, M.M. Ristic, Optimizacija dielektrične konstante za čisti barijum titanat, XXXIX konferencija ETRANa, IV sveska, Zlatibor, 1995, str. 428-431.

  
  

  69. Z.S. Nikolic, V.V. Mitic, M.M. Ristic, CAD-System for Optimal BaTiO3-Ceramics, Symposium on Computer Science and Information Technology YU-Info '95, Brezovica, 1995, Proceeding. Yugoslav Society ETRAN. Beograd, 1995. Vol. 3. str. 13-17.

  
  

  68. Z.S. Nikolić, M.M. Ristić, Tečno-fazno sinterovanje: modeliranje i simulacija procesa, YU-Info '95, Zbornik radova, Knjiga 3, Ed. B. Radenković, M. Ivković i M. Stanojević, Brezovica, 4-7. aprila 1995, str. 13-17.

  
  

  67. V.V. Mitic, Z.S. Nikolic, M.M. Ristic, CAD-System for Optimal BaTiO3-Ceramics, YU-Info '95, Brezovica, 4-7. aprila 1995, Abstracts, str. 58.

  
  

  66. Z.S. Nikolić, Modelovanje i simulacija difuzionih fenomena tokom tečno-faznog sinterovanja, II jugoslovenska konferencija "Teorija i tehnologija sinterovanja TEOTES '95", Beograd-Čačak, 1995, str. 2.

  
  

  65. V.V. Mitić, Z.S. Nikolić, B. Jordović, M.M. Ristić, Dielektrična svojstva barijum-titanatne keramike u funkciji raspodele veličine zrna i pora, II jugoslovenska konferencija "Teorija i tehnologija sinterovanja TEOTES '95, Beograd-Čačak, 1995, str. 16-17.

  
  

  64. V.V. Mitić, Z.S. Nikolić, B. Jordović, M. Miljković, M.M. Ristić, Uticaj uslova konsolidacije na strukturna svojstva barijum-titanatne keramike bez dodataka, II jugoslovenska konferencija "Teorija i tehnologija sinterovanja TEOTES '95", Beograd-Čačak, 1995, str. 32.

  
  

  63. V.V. Mitić, Z.S. Nikolić, M.M. Ristić, Modelovanje morfoloških promena mikrostrukture BaTiO3-keramike, II jugoslovenska konferencija "Teorija i tehnologija sinterovanja TEOTES '95", Beograd-Čačak, 1995, str. 33

  
  

  62. V.V. Mitić, Z.S. Nikolić, M.M. Ristić, Efekat pritiska presovanja na polarizaciona svojstva BaTiO3-keramike, XXXIX konferencija ETRANa, IV sveska, Zlatibor, 1995, str. 432-435.

  
  

  61. V.V. Mitic, Z.S. Nikolic, Lj. Kocic, B. Jordovic, M.M. Ristic, Analysis of the Influence of Pressing Pressure on Ferroelectric Properties of BaTiO3-Ceramics, 9th International Congress for Stereology, Copenhagen, Denmark, August 20-25, 1995, Abstracts, p. 116.

  
  

  60. V.V. Mitic, B. Jordovic, Z.S. Nikolic, Lj. Kocic, M.M. Ristic, Relations between Process Parameters and Electrical Properties of Barium-Titanate Ceramics, Structural Characteristics, 9th International Congress for Stereology, Copenhagen, Denmark, August 20-25, 1995, Abstracts, p. 117.

  
  

  59. V.V. Mitic, Z.S. Nikolic, B. Jordovic, Lj. Kocic, M.M. Ristic, The Effect of Consolidation Conditions on Interrelations of Structural and Electronical Properties of BaTiO3-Ceramics, 9th International Congress for Stereology, Copenhagen, Denmark, August 20-25, 1995, Abstracts, p. 118.

  
  

  58. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, A New Computer Model of Ostwald Ripening, International Conference on the Science, Technology, and Applications of Sintering "Sintering 1995", September 24-27, 1995, The Pennsylvania State University, Pennsylvania.

  
  

  57. Z.S. Nikolic, R.M. Spriggs, M.M. Ristic, Computer Simulation of Directional Grain Growth during Liquid Phase Sintering, International Conference on the Science, Technology, and Applications of Sintering "Sintering 1995", September 24-27, 1995, The Pennsylvania State University, Pennsylvania.

  
  

  56. V.V. Mitic, Z.S. Nikolic, Lj. Zivkovic, M.M. Ristic, The Frequency and Hysteresis Characteristics of BaTiO3-Ceramics with CeO2 and MnCO3 as Additives, International Conference on the Science, Technology, and Applications of Sintering "Sintering 1995", September 24-27, 1995, The Pennsylvania State University, Pennsylvania.

  
  

  55. V.V. Mitic, Z.S. Nikolic, M.M. Ristic, The Frequency Characteristics of BaTiO3-Ceramics as a Function of Sintering Temperature, International Conference on the Science, Technology, and Applications of Sintering "Sintering 1995", September 24-27, 1995, The Pennsylvania State University, Pennsylvania, p. 117.

  
  

  54. V.V. Mitic, Z.S. Nikolic, M.M. Ristic, Influence of Sintering Temperature on the Dielectric Constant of BaTiO3-Ceramics, International Conference on the Science, Technology, and Applications of Sintering "Sintering 1995", September 24-27, 1995, The Pennsylvania State University, Pennsylvania, p. 118.

  
  

  53. V. Mitić, Z. Nikolić, Proučavanje električnih osobina barijum titanatne keramike u funkciji pritiska presovanja, XXXVIII konferencija ETRANa, Niš, 1994, str. 335-340.

  
  

  52. V. Mitić, Z.S. Nikolić, Uticaj pritiska presovanja na histerezisne karakteristike BaTiO3-keramike, II simpozijum Srpskog hemijskog društva o keramici i staklu sa međunarodnim učešćem "Fizika, hemija i tehnologija keramike i stakla", Aranđelovac, 21-23 septembar 1994, Srpsko hemijsko društvo, Beograd, str. 295-296.

  
  

  51. Z.S. Nikolić, V. Mitić, Proučavanje električnih osobina BaTiO3-keramike u funkciji temperature sinterovanja, XXXVII konferencija ETANa, Beograd, 20-23. septembar 1993, str. 27-31.

  
  

  50. V. Mitić, Z.S. Nikolić, B. Jordović, Lj. Zivković, Promene električnih i mikrostrukturnih karakteristika BaTiO3-keramike dodavanjem primesa, XXXVII konferencija ETANa, Beograd, 20-23. septembar 1993, str. 21-26.

  
  

  49. Z.S. Nikolić, Opšti aspekti primene kompjutera u proučavanju procesa sinterovanja, Jugoslovenska konferencija "Teorija i tehnologija sinterovanja", Srpska akademija nauka i umetnosti, Beograd, 15-17. septembar 1993, str. 1-4.

  
  

  48. V. Mitić, Z.S. Nikolić, Uticaj temperature sinterovanja na električne karakteristike BaTiO3-keramike, XXXV konferencija ETANa, Ohrid, 1991, str. 107-112.

  
  

  47. Z.S. Nikolić, Modeliranje i simulacija sinterovanja u prisustvu tečne faze, Naučni skup "Novi sinterovani materijali i njihova primena", Elektronski fakultet, Univerzitet u Nišu, Niš, 17-19. septembar 1990, str. 4.

  
  

  46. Z.S. Nikolić, M.M. Ristić, SIMTFS - program za 2D simulaciju sinterovanja u prisustvu tečne faze, XIII simpozijum o informacionim tehnologijama "Sarajevo - Jahorina 1989", Sarajevo, 20.-24. mart 1989, str. 226-1 - 226-4.

  
  

  45. Z.S. Nikolić, Dvodimenziona simulacija sinterovanja u prisustvu tečne faze, Nauka i tehnologija novih materijala, Zbornik radova naučnog skupa Materijali '89, Partizanske vode, 4.-6. oktobar 1989, str. 39-44.

  
  

  44. Z.S. Nikolić, M.M. Ristić, Simulacioni metod za određivanje kinetike složenih vremenski zavisnih procesa, Simpozij projektiranje i proizvodnja podržani računalom, Zagreb, 17.-19. listopada 1989, str. 307-313.

  
  

  43. Z.S. Nikolić, M.Z. Arsić, Informacioni sistem za elektronsku mernu opremu, XII Simpozijum o informacionim tehnologijama "Sarajevo - Jahorina 1988", Sarajevo, 21.-25. mart 1988, str. 142-149.

  
  

  42. M.Z. Arsić, Z.S. Nikolić, Jedno rešenje informacionog sistema za elektronsku mernu opremu, Zbornik radova JUREMA 33 (1988), 2. svezak, Zagreb - Plitvička jezera, april 1988, str. 5-8.

  
  

  41. Z.S. Nikolić, R.M. Spriggs, M.M. Ristić, Primena računara u projektovanju, praćenju i obezbeđenju kvaliteta tehnoloških procesa, Zbornik referatov simpozija o elektronskih sestavnih delih in materijalih - SD 87, Topolšica-Titovo Velenje, septembar 1987, str. 65-67.

  
  

  40. D.P. Milojković, Z.S. Nikolić, Analiza uticaja dominantnih mehanizama na prognozu procesa sinterovanja, IX Jugoslovensko savetovanje o savremenim neorganskim materijalima, Herceg Novi, 2.-6. juna 1986, str. 287-293.

  
  

  39. Z.S. Nikolić, M.M. Ristić, Određivanje vremenske zavisnosti veličine vrata tokom procesa sinterovanja, IX Jugoslovensko savetovanje o savremenim neorganskim materijalima, Herceg Novi, 2.-6. juna 1986, str. 295-300.

  
  

  38. S. Mijalković, Z. Nikolić, D. Pantić, N. Stojadinović, D. Radivojević, A. Živić, Praktički aspekti  modeliranja tehnologije integrisanih kola programom SUPREM II, Jugoslovanski simpozij o elektronskih sestavnih delih in materijalih - SD 86, Otočec ob Krki, september 1986, str. 231-236.

  
  

  37. Z.S. Nikolić, M.M. Ristić, Prilog proučavanju kinetike rasta vrata tokom procesa sinterovanja, Jugoslovanski simpozij o elektronskih sestavnih delih in materialih - SD 85, Ljubljana, oktober 1985, str. 131-134.

  
  

  36. Z.S. Nikolić, M.M. Ristić, Prilog uopštavanju dijagrama dominantnih mikroprocesa, Jugoslovanski simpozij o elektronskih sestavnih delih in materialih - SD 85, Ljubljana, oktober 1985, str. 127-130.

  
  

  35. Z.S. Nikolić, Matematički formalizam i dijagrami sinterovanja, XXIX konferencija ETAN-a, Niš, 3.-7. juna 1985, str. XI.3-XI.9.

  
  

  34. Z.S. Nikolić, Jedno rešenje informacionog sistema kontrole kvaliteta poluprovodničkih komponenata, Jugoslovanski simpozij o elektronskih sestavnih delih in materialih - SD 85, Ljubljana, oktober 1985, str. 85-87.

  
  

  33. Z. Nikolić, D. Dimitrijević, Kontrola kvaliteta i pouzdanosti poluprovodničkih komponenata u uslovima elektronske obrade podataka, Jugoslovanski simpozij o elektronskih sestavnih delih in materialih - SD 84, Ljubljana, oktober 1984, str. 61-64.

  
  

  32. Z.S. Nikolić, Dokumentacioni sistem zaštite na radu, VIII Bosanskohercegovački simpozijum iz informatike Jahorina '84, 26.-30. marta 1984, str. 262-2 - 262-7.

  
  

  31. Z.S. Nikolić, M.M. Ristić, Opšti model za prognozu procesa u nauci o materijalima, VIII Jugoslovensko savetovanje o savremenim neorganskim materijalima, Split, 4.-8. juna 1984, str. VII.277-VII.283.

  
  

  30. Z.S. Nikolić, M.M. Ristić, Prognoza procesa sinterovanja pomoću dijagrama sinterovanja, XXVII konferencija ETAN-a, Struga, 6.-10. juna 1983, str. V.3-V.9.

  
  

  29. Z.S. Nikolić, Jedno rešenje informacionog sistema za obradu podataka o povredama na radu, VII Bosanskohercegovački simpozijum iz informatike Jahorina '83, 21.-25. marta 1983, str. 268-1 - 268-6.

  
  

  28. Z.S. Nikolić, D. Stefanović, M.M. Ristić, Dijagrami sinterovanja, Multidisciplinarne nauke i njihova uloga u naučno-tehničkom progresu, Beograd, str. 247-255 (1983).

  
  

  27. M.I. Miloševski, Z. Nikolik, M.M. Ristik, Kinetika na redukcija na MoO2, Makedonska akademija na naukite i umetnostite, Prilozi, III 2, Skopje, str. 49-56 (1982).

  
  

  26. Z. Nikolić, Informacioni sistem u oblasti zaštite na radu, Međunarodni simpozijum o saradnji na polju širenja informacija iz oblasti zaštite na radu i higijene rada, Niš, str. 66-67 (1982).

  
  

  25. D.Č. Stefanović, Z.S. Nikolić, M.M. Ristić, Pristup stvaranju sopstvene baze podataka za projektovanje novih materijala, V Bosanskohercegovački simpozijum iz informatike Jahorina '81, 23.-27. marta 1981, str. 266-1 - 266-8.

  
  

  24. Z.S. Nikolić, D. Stefanović, M.M. Ristić, Primena kompjutera u modeliranju i simulaciji procesa rasta zrna u heterogenim sistemima, V Bosanskohercegovački simpozijum iz informatike Jahorina '81, 23.-27. marta 1981, str. 366-1 - 366-8.

  
  

  23. Z.S. Nikolić, D. Stefanović, Prilog proučavanju geometrije skupljanja tokom sinterovanja u prisustvu tečne faze, XXV konferencija ETAN-a, Mostar, 8.-12. juna 1981, str. I.629-I.634.

  
  

  22. M.M. Ristić, D.Č. Stefanović, Z. Nikolić, M. Blažević, M. Pavićević, Izučavanje procesa konsolidacije kadmijum-sulfida, XXV konferencija ETAN-a, Mostar, 8.-12. juna 1981, str. I.643-I.648.

  
  

  21. Z.S. Nikolić, D.Č. Stefanović, M.M. Ristić, Prilog proučavanju brzine procesa rasta zrna tokom sinterovanja u prisustvu tečne faze, Jugoslovanski simpozij o elektronskih sestavnih delih in materialih - SD 81, Ljubljana, oktober 1981, str. 117-120.

  
  

  20. Z.S. Nikolić, M.M. Ristić, Novi tip mapa sinterovanja, Jugoslovanski simpozij o elektronskih sestavnih delih in materialih - SD 81, Ljubljana, oktober 1981, str. 121-123.

  
  

  19. Z.S. Nikolić, Granični dijagrami, Zbornik radova sa savetovanja "Računarska grafika", Zagreb, 22-23 rujan 1980, str. 54-59.

  
  

  18. D. Stefanović, Z. Nikolić, M.M. Ristić, Neka pitanja prognoze osobina materijala, Simpozijum "Multidisciplinarne nauke i njihova uloga u naučno-tehničkom progresu", Beograd, 8-11. decembar 1980, str. 35.

  
  

  17. Z. Nikolić, M.M. Ristić, Dijagrami sinterovanja, Simpozijum "Multidisciplinarne nauke i njihova uloga u naučno-tehničkom progresu", Beograd, 8-11. decembar 1980, str. 40.

  
  

  16. Z.S. Nikolić, M.M. Ristić, Neki specifični problemi modeliranja sinterovanja u tečnoj fazi, Jugoslovanski simpozij o elektronskih sestavnih delih in materijalih - SD 79, Ljubljana, 4.-5. oktober 1979, str. 261-267.

  
  

  15. Z.S. Nikolić, W.J. Huppmann, Prilog proučavanju rasta zrna u heterogenim sistemima, XXIII konferencija ETAN-a, Maribor, 11.-15. juna 1979, str. I.449-I.455.

  
  

  14. Z.S. Nikolić, M.M. Ristić, Proučavanje uticaja hemijskog potencijala na rast zrna u heterogenim sistemima, VI Jugoslovenski kongres za čistu i primenjenu hemiju, Sarajevo, 10.-13. septembra 1979, str. 220.

  
  

  13. Z.S. Nikolić, M.M. Ristić, Neke modifikacije u matematičkom modelu dijagrama sinterovanja, Jugoslovanski simpozij o elektronskih sestavnih delih in materialih - SD 78, Ljubljana, 4.-6. oktober 1978, str. 111-118.

  
  

  12. Z.S. Nikolić, M.M. Ristić, Uticaj varijacije vrednosti fizičkih parametara na oblik dijagrama sinterovanja, Jugoslovanski simpozij o elektronskih sestavnih delih in materijalih - SD 78, Ljubljana, 4.-6. oktober 1978, str. 119-124.

  
  

  11. Z.S. Nikolic, M.M. Ristic, W.J. Huppmann, G. Petzow, Computer Simulation of Solution-Reprecipitation during Liquid Phase Sintering, Proceedings of the Yugoslav Symposium on Electronic Components and Materials - SD 78, Ljubljana, October 4-6, 1978, pp. 125-130.

  
  

  10. S. Ristić, Z.S. Nikolić, Prilog proučavanju karakteristika tranzistora izazvanih mehaničkim naprezanjem, Jugoslovanski simpozij o elektronskih sestavnih delih in materijalih - SD 78, Ljubljana, 4.-6. oktober 1978, str. 201-206.

  
  

  9. Z.S. Nikolić, S. Ristić, O jednom postupku za približno određivanje vrednosti faktora strujnog pojačanja, Jugoslovanski simpozij o elektronskih sestavnih delih in materijalih - SD 78, Ljubljana, 4.-6. oktober 1978, str. 207-211.

  
  

  8. M.M. Ristić, S.M. Stojilković, Z.S. Nikolić, Jedan novi način prikazivanja zavisnosti specifične električne otpornosti poroznih materijala od pritiska presovanja i temperature odgrevanja, V Jugoslovensko savetovanje o savremenim neorganskim materijalima, Zadar, 12.-16. juna 1978, str. 187-194.

  
  

  7. Lj. Nikolić, S. Stojilković, Z. Nikolić, Uticaj pritiska presovanja na sinterovanje Al2O3 gela, V Jugoslovensko savetovanje o savremenim neorganskim materijalima, Zadar, 12.-16. juna 1978, str. 195-201.

  
  

  6. Z.S. Nikolić, M.M. Ristić, S. Stojilković, Procesi presovanja i njihova matematičko-fizička formulacija, Jugoslovanski simpozij o elektronskih sestavnih delih in materijalih - SD 77, Ljubljana, oktober 1977, str. 123-130.

  
  

  5. M. Miloševski, Z. Nikolik, M.M. Ristik, Presuvanje na molibdenski pravovi, VI savetuvanje na hemičarite i tehnolozite na Makedonija, Skopje, 3-4 juni 1977, str. 23.

  
  

  4. M.I. Milosevski, M.M. Ristic, Z. Nikolic, Reduction Kinetics of MoO2, 5th Yugoslav Symposium of Chemistry and Technology of Macromolecules, Abstracts, Skopje, June 1-4, 1976, pp. II-18.

  
  

  3. Z. Nikolić, S. Ristić, D. Uskoković, M.M. Ristić, Primena dijagrama sinterovanja kod rešavanja nekih problema u nauci o materijalima, Jugoslovanski simpozij o elektronskih sestavnih delih in materijalih - SD 75, Ljubljana, oktober 1975, str. 23-30.

  
  

  2. Z.S. Nikolić, D. Stefanović, Numerički postupak za određivanje parametara jedne jednačine skupljanja, XIX konferencija ETAN-a, Ohrid, 2.-5. juna 1975, str. 1453.

  
  

  1. D. Stefanović, Z. Nikolić, Analize nekih parametara koji karakterišu mogućnosti autojonske mikroskopije, XIX konferencija ETAN-a, Ohrid, 2.-5. juna 1975, str. 1453.