Dodatne informacije

• Lični podaci

• Datum rođenja: 20.08.1968.
• Mesto rođenja: Bosilegrad

• Obrazovanje

• Fakultet: Elektronski fakultet
• Odsek / Grupa / Smer: Automatika i elektronika
• Godina diplomiranja: 1993.

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  Slobodan Aleksandrov, Zoran Jovanović, Dragan Antić, "The new approach to training engineers for applying programmable logic controllers in modern systems of automatic control", Reengineering and Entrepreneurship under the Contemporary Conditions of Enterprise Business - Thematic collection of papers of international significance, Editor: Professor Biljana Predić, PhD, Project Manager, Publisher: Faculty of Electronic Engineering, and Faculty of Economics, ISBN 978-86-6125-065-1 (FEE), University of Niš, Niš, Serbia, januar 2012. (M14).

  
  

   

• Radovi u časopisima sa IMPACT faktorom:

  Slobodan Aleksandrov, Zoran Jovanović, Dragan Antić, Saša Nikolić, Staniša Perić, Radica Aleksandrov, ''Analysis of the Efficiency of Applied Virtual Simulation Models and Real Learning Systems in the Process of Education in Mechatronics'', Acta Polytechnica Hungarica, Vol. 10, No6, 2013., pp. 59-76. Print ISSN: 1785-8860, Publisher: Óbuda University, Hungary. August 2013. IF за 2012: 0.588. (M23).

  
  

  Stanimir Čajetinac, Dragan Šešlija, Slobodan Aleksandrov, Milica Todorović, '' PWM Control  and Identification of Frequency Characteristics of a Pneumatic Actuator using PLC Controller '', The journall Electronics and Electrical Engineering,  Vol 123, No 7, 2012., pp. 21-26. Septembar, Litvanija, Print ISSN: 1392-1215, Online ISSN: 2029-5731,(M23).

  
  

   

• Radovi u ostalim časopisima:

  
  Slobodan Aleksandrov, Zoran Jovanović, Saša Nikolić, Stanimir Čajetinac, ''Mechatronic Systems Control Based on SCADA System, OPC Server and LabView'', FACTA UNIVERSITATIS Series: Automatic Control and Robotics, Vol. 10, No. 2, 2011., pp. 189-198. Print ISSN: 1820-6417, Publisher: University of Niš. (M52)

  
  

  Slobodan Aleksandrov, Zoran Jovanović, Stanimir Čajetinac, Milomir Mijatović, ''Real-Time Web Access To The Mechatronics Laboratory in the Process Of E-Learning'' FACTA UNIVERSITATIS Series: Automatic Control and Robotics, vol. 11, No 1, 2012., pp. 45-56. Print ISSN: 1820-6417, Publisher: University of Niš.  (M52)

  
  

  Slobodan Aleksandrov, Zoran Jovanović, Saša Nikolić, Staniša Perić: „ Modeliranje, simulacija i verifikacija modela industrijskog robota“, TEHNIKA-Elektrotehnika, Savez inženjera i tehničara, vol., no. 1, pp. 96-103, februar 2014, Print ISSN:0040-2176, UDC:004.896, Savez  inženjera i tehničara Srbije, Beograd, (M52)

  
  

  Miroslav Novaković, Stanimir Čajetinac, Radovan Petrović, Slobodan Aleksandrov: '' Determination of frequency characteristics of a proportional pressure valve by step response '', FACTA UNIVERSITATIS Series: Automatic Control and Robotics, Vol. 9, No 1, 2010., pp. 161-166, Print ISSN: 1820-6417, Publisher: University of Niš. (M52).

• Radovi na naučnim skupovima međunarodnog značaja:

   Slobodan Aleksandrov, Zoran Jovanović, Stanimir Čajetinac, ''Programmable logic controler Festo connecting through controllers and industrial ethernet transmission control'', Proceedings of the X Trienal International SAUM Conference on Systems, Automatic Control and Measurements, SAUM 2010, Niš, Serbia, November 10.-12., 2010., pp. 307-310. (ISBN: 978-86-6125-020-0), Publisher: Faculty of Electronic Engineering, Niš. 

  
  

  Slobodan Aleksandrov, Zoran Jovanović, Stanimir Čajetinac, Leonid Stoimenov, ''Access to PLC in real-time software package Team Viewer'', Proceedings of the X Trienal International SAUM Conference on Systems, Automatic Control and Measurements, SAUM 2010, Niš, Serbia, November 10.-12., 2010., pp. 145-148. (ISBN: 978-86-6125-020-0), Publisher: Faculty of Electronic Engineering, Niš. 

  
  

  Slobodan Aleksandrov, Zoran Jovanović, Dragan Antić, Staniša Perić, Saša Nikolić, Darko Mitić, ''Web Access to the Real Mechatronics Laboratory'', Proceedings of the XI International Conference on Systems, Automatic Control and Measurements, SAUM 2012, Niš, Serbia, November 14.-16., 2012., pp. 431-434. (ISBN: 978-86-6125-072-9), Faculty of Electronic Engineering, Niš. 

  
  

  Slobodan Aleksandrov, Predrag Simić, Milomir Mijatović, '' Realizacija projektne nastave u oglednom profilu tehničar mehatronike'', 3. Internacionalna konferencija Tehnika i informatika u obrazovanju, Tehnički fakultet Čačak, 7.-9. maj, 2010., pp. 510-515. 

  
  

  Radica Aleksandrov, Slobodan Aleksandrov, Zoran Jovanović, ''Novi pristup u nastavi programiranja industrijskog robota'', 4. Internacionalna konferencija Tehnika i informatika u obrazovanju , Tehnički fakultet Čačak, 1.-3.6.2012., pp. 82-89.
  

  
  

  Slobodan Aleksandrov, Stanimir Čajetinac , Dragan Šešlija: ''Didactic system Festo MPS - Sorting station and its application in education in the field of mechatronics'', 10th International Conference Research and Development in Mechanical Industry RaDMI 2010, Donji Milanovac, Serbia, 16. - 19. September 2010., pp. 549-553, Publisher: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., Vrnjačka Banja.

  
  

  Stanimir Čajetinac, Dragan Šešlija, Slobodan Aleksandrov, Milica Todorović: ''PWM control of the pneumatic actuator by PLC controller'', ''Research and Development in Mechanical Industry RaDMI 2010'', Donji Milanovac, Serbia, 16. - 19. September 2010., Publisher: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., Vrnjačka Banja.

  
  

  Stanimir Čajetinac, Milica Todorović, Slobodan Aleksandrov, Miroslav Novaković: '' Modelling and simulation of pneumatic actuator'', Proceedings of the 11th International Conference Research and Development in Mechanical Industry, RaDMI 2011, Sokobanja, Serbia, September 15.-18., 2011., pp. 460-464. Publisher: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., Vrnjačka Banja.

  
  

  Slobodan Aleksandrov, Stanimir Čajetinac, Zoran Jovanović, ''Internet Access to PLC with Integrated WEB Server'', Proceedings of the 11thInternational Conference ''Research and Development in Mechanical Industry'', RaDMI 2011, Sokobanja, Serbia, September 15.-18., 2011, pp. 425-430. Publisher: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., Vrnjačka Banja.

  
  

  Slobodan Aleksandrov, Radica Aleksandrov, Zoran Jovanović, Stanimir Čajetinac: ''Robot Control Over the Internet using Computers and Mobile Phones'', Proceedings of the 12thInternational Conference Research and Development in Mechanical Industry, RaDMI 2012, Vrnjačka Banja, Serbia, September 13.-17., 2012., pp. 715-720. Publisher: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., Vrnjačka Banja.

  
  

  Stanimir Čajetinac, Milica Todorović, Vladeta Jevremović, Slobodan Aleksandrov,: ''Application of Matlab in control simulation of PWM with pneumatic actuator'', 12th International Conference Research and Development in Mechanical Industry, RaDMI 2012, 13.-17. September 2012., Vrnjačka Banja, Serbia, pp.745-751. Publisher: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., Vrnjačka Banja. 

  
  

  Slobodan Aleksandrov, Radica Aleksandrov, Zoran Jovanović, Stanimir Čajetinac:'' Implementation Programmable Logic Controller and Monitoring of Induction Motor Fed by Invertrer'', 13th International Conference Research and Development in Mechanical Industry, RaDMI 2013, 12.-15. September 2012., Kopaonik, Serbia, pp.623-628. Publisher: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., Vrnjačka Banja, Serbia.

  
  

  Stanimir Čajetinac, Slobodan Aleksandrov, Selver Pepić, Miroslav Novaković: ''Possible Realization of PWM Control by Pneumatic Actuator'', 13th International Conference Research and Development in Mechanical Industry, RaDMI 2013, 12.–15. September 2012., Kopaonik, Serbia, pp. 765-770. Publisher: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., Vrnjačka Banja.
  

  
  

  Slobodan Aleksandrov, Milomir Mijatović, Radica Aleksandrov: “Up-to-date approach to design of mechatronic systems “, 6.  International conference Technics and Informatics in education - TIO 2016, Faculty of Technical Sciences Čačak, University of Kragujevac,  28th–29th, May 2016, Čačak, Serbia, UDK: 004.896:004.414.23

  
  

  
  S. Čajetinac, D. Šeslija, M. Todorović, S. Aleksandrov, Proportional and PWM Electropneumatic Control –the Choise of Optimal Solution, XIII International SAUM Conference on Systems, Automatic Control and Measurements, Session G: Hydraulic and Pneumatic Systems, Niš, Serbia, November 9-11, 2016.

  
  

  Slobodan Aleksandrov, Zoran Jovanović, Stanimir Čajetinac, Radica Aleksandrov: “Interaktivna simulacija i programiranje industrijskog robota”, Reinženjering poslovnih procesa u obrazovanju, 3. Nacionalna konferencija sa međunarodnim učešćem, Fakultet tehničkih nauka u Čačku, 25-27.Septembar 2015.

  
  

  Slobodan Aleksandrov, Milomir Mijatović, Radica Aleksandrov: “Primena softverskih paketa za modeliranje i simulaciju u planiranju trajektorije kretanja robota – izbegavanje prepreka “,  Konferencija sa međunarodnim učešćem „Primena novih tehnologija i ideja u školskom inženjerskom obrazovanju“, 15-16. Maj 2017. Požega.

  
  

  Slobodan Aleksandrov, Stanimir Ĉajetinac, Vladeta Jevremović, Goran Miodragović, Selver Pepić Razvoj kurikuluma studijskog programa "Informacione tehnologije", Reinženjering poslovnih procesa u obrazovanju 2017, RPPO17, 4. Nacionalna konferencija sa međunarodnim učešćem, 29. septembar - 01. oktobar 2017. Čačak.

  
  

   

• Radovi na domaćim naučnim skupovima:

  Slobodan Aleksandrov, Radica Aleksandrov, Predrag Simić, ''Primena savremenih didaktičkih sistema u obrazovanju iz oblasti mehatronike'', Tehnologija, Informatika i Obrazovanje za društvo učenja i znanja, 6. Međunarodni Simpozijum, Tehnički fakultet Čačak, 3.-5. jun 2011., pp. 510-515.

  
  

  Slobodan Aleksandrov, Zoran Jovanović, Dragan Šešlija, Radica Aleksandrov, “Analiza primene Web laboratorije u nastavi mehatronike” Tehnika i informatika u obrazovanju, 5. Konferencija sa međunarodnim učešćem, Fakultet tehničkih nauka Čačak, 30.-31. maj, 2014.

  
  

  Slobodan Aleksandrov, Radica Aleksandrov, Goran Miodragović, Ljiljana Pecić: „Značaj primene učenja na daljinu u neformalnom obrazovanju“,INFORMACIONE TEHNOLOGIJE, OBRAZOVANJE I PREDUZETNIŠTVO – ITOP16, Fakultet tehničkih nauka u Čačku,  10-11. 09.2016. Čačak

  
  

  Snežana Gavrilović, Goran Miodragović, Slobodan Ivanović, Slobodan Aleksandrov: „Prilog formiranju klasa u softverskom okruženju Visual FOXPRO“, INFORMACIONE TEHNOLOGIJE, OBRAZOVANJE I PREDUZETNIŠTVO – ITOP16, Fakultet tehničkih nauka u Čačku,  10-11. 09.2016. Čačak.

  
  

  Goran Miodragović, Selver Pepić, Slobodan Ivanović, Slobodan Aleksandrov, Snežana Gavrilović: „Integrisani upitni jezik – LINQ u objektno orijentisanom okruženju - C# “, INFORMACIONE TEHNOLOGIJE, OBRAZOVANJE I PREDUZETNIŠTVO – ITOP17, Fakultettehničkihnauka u Čačku,  8-9. 04.2017. Čačak

  
  

  Selver Pepić, Zoran Lončarević, Goran Miodragović, Slobodan Aleksandrov: „Implementacija rešenja problema trgovačkog putnika genetskim algoritmima u JAVA programskom jeziku“, INFORMACIONE TEHNOLOGIJE, OBRAZOVANJE I PREDUZETNIŠTVO – ITOP17, Fakultet tehničkih nauka u Čačku,  8-9. 04.2017. Čačak.